CBP-2150AN MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits The Big Deal

  • Low insertion loss with excellent power handling
  • Passbands up to 6 GHz
  • Fractional bandwidth from 3 to 25%
  • Low profile designs with min. height of 0.120”
  • Excellent temperature stability
  • Rugged construction to handle demanding environmental conditions Product Overview Mini-Circuits’ Coaxial-Ceramic Resonator filters offer low insertion loss in very small form factors, using ceramic material with high dielectric constant and superior Q factor. Bandpass and bandstop filters,diplexer and multiplexer designs can be constructed using this technology. Low insertion loss combined with excellent power handling makes these filters well suited for transmitter and receiver signal chains. Advanced filter design and construction can achieve stopband width greater than 3x the center frequency as high as 20 GHz. All our coaxial-ceramic resonator filters are built with rugged construction, qualified to withstand multiple demanding reflow cycles. Excellent repeatability across units is achieved through precise tuning and process control. Key Features 50Ω DC to 6 GHz Coaxial-Ceramic Resonator Filters and Multiplexers Surface Mount Page 1 of 3 Feature Advantages Low insertion loss Low signal loss results in better SNR in signal chain Fast roll-off Higher selectivity results in better adjacent channel rejection and dynamic range Wide stop band Wide spur-free stopband results in better receiver sensitivity Excellent power handling Well suited for transmitter applications Rugged Construction These filter assemblies have been qualified over a wide range of thermal, mechanical and environ- mental conditions including withstanding the stress of extensive solder reflow cycles Small Size Very well suited for high performance applications where size is a constraint. Temperature stability Very minimal change in electrical performance across temperature makes these filters suitable for a wide range of operating conditions.

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Surface Mount CBP-2150AN+ Electrical Specifications at 25°C CASE STYLE: TJ2826-1 Parameter F# Frequency (MHz) Min. Typ. Max. Unit Pass Band Center Frequency - - - 2150 - MHz Insertion Loss F1-F2 2000 - 2300 - 1.2 1.8 dB VSWR F1-F2 2000 - 2300 - 1.4 1.8 :1 Stop Band, Lower Insertion Loss DC-F3 DC - 1500 50 60 - dB F3-F4 1500 - 1700 20 27 - dB Stop Band, Upper Insertion Loss F5-F6 2760 - 3200 20 26 - dB F6-F7 3200 - 3620 35 40 - dB Maximum Ratings Operating Temperature -40°C to 85°C Storage Temperature -55°C to 100°C RF Power Input 10 W at 25°C Permanent damage may occur if any of these limits are exceeded. REV.A ECO-003531 CBP-2150AN+ EDU3541 URJ 200108 Page 2 of 3 Typical Frequency Response Functional Schematic F1 F2 FREQUENCY (MHz) INSERTION LOSS (dB) F5F4 F6DC F3 F7 RF IN RF OUT +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications 50Ω 2000 to 2300 MHz Bandpass Filter

Applications

  • Broadcast
  • PMR Communications
  • Fixed mobile

Features

  • Low Insertion loss
  • Minimal Insertion loss variation over operating temperature
  • Low-profile shielded package Typical Performance Data at 25°C Frequency (MHz) Insertion Loss (dB) VSWR (:1) Frequency (MHz) Group Delay (ns) 1 100.60 172.74 2000 2.00 10 102.64 356.53 2015 1.92 100 113.14 790.59 2030 1.86 1000 64.78 158.94 2045 1.80 1500 58.28 65.28 2060 1.75 1700 27.24 32.57 2075 1.71 1860 3.00 1.93 2090 1.67 2000 1.11 1.25 2105 1.65 2100 0.96 1.30 2120 1.64 2150 0.85 1.12 2135 1.63 2200 0.82 1.10 2150 1.61 2300 0.86 1.24 2165 1.61 2425 3.09 3.66 2180 1.60 2660 20.18 65.24 2195 1.59 2760 26.53 102.24 2210 1.58 3000 46.94 124.26 2225 1.57 3100 50.17 112.31 2240 1.57 3200 42.86 105.73 2250 1.57 3500 39.86 58.65 2275 1.60 3620 40.44 40.90 2300 1.66 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 1800 1900 2000 2100 2200 2300 2400 2500 VSWR FREQUENCY (MHz) CBP-2150AN+ VSWR 1700 1800 1900 2000 2100 22 00 2300 2400 2500 2600 2700 INSERTION LOSS (dB) FREQUENCY (MHz) CBP-2150AN+ INSERTION LOSS (Zoomed) 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 1800 1900 2000 2100 2200 2300 2400 2500 GROUP DELAY (ns) FREQUENCY (MHz) CBP-2150AN+ GROUP DELAY 100 0 500 1000 1500 2000 2500 3000 3500 4000 INSERTION LOSS (dB) FREQUENCY (MHz) CBP-2150AN+ INSERTION LOSS Generic photo used for illustration purposes only

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits CBP-2150AN+ SOLDER RESIST METALLIZATION 756 12 11 756 12 11 B A C D D F G FE P M N L L K J H U Y T S W X J V V R R M Q SUGGESTED LAYOUT FOR P.C. PATTERN Q INDEX Outline Drawing INPUT 1 OUTPUT 4 Pad Connections Demo Board MCL P/N: TB-1099+ Suggested PCB Layout (PL-630) inch mmOutline Dimensions ( ) A .472 12.00 B .394 10.00 C .110 2.79 D .060 1.52 E .322 8.19 F .075 1.91 G .244 6.19 H .160 4.06 J .157 4.00 K .317 8.06 L .095 2.41 M .120 3.05 N .137 3.48 P .257 6.52 Q .055 1.40 R .115 2.92 S .204 5.17 T .274 6.95 U .434 11.02 V .080 2.03 W .352 8.95 X .282 7.17 Y .512 13.01 Wt. grams Page 3 of 3 Note: Please refer to case style drawing for details