CBP-1413R5A MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits The Big Deal

  • Low insertion loss with excellent power handling
  • Passbands up to 6 GHz
  • Fractional bandwidth from 3 to 25%
  • Low profile designs with min. height of 0.120”
  • Excellent temperature stability
  • Rugged construction to handle demanding environmental conditions Product Overview Mini-Circuits’ Coaxial-Ceramic Resonator filters offer low insertion loss in very small form factors, using ceramic material with high dielectric constant and superior Q factor. Bandpass and bandstop filters,diplexer and multiplexer designs can be constructed using this technology. Low insertion loss combined with excellent power handling makes these filters well suited for transmitter and receiver signal chains. Advanced filter design and construction can achieve stopband width greater than 3x the center frequency as high as 20 GHz. All our coaxial-ceramic resonator filters are built with rugged construction, qualified to withstand multiple demanding reflow cycles. Custom integrated assembly with LNA in greatly simplifying system integration. They can be realized in small form factors with high-quality, precise machining for applications where size is critical. Excellent repeat- ability across units is achieved through precise tuning and process control. Key Features 50Ω DC to 6 GHz Coaxial-Ceramic Resonator Filters and Multiplexers Surface Mount Page 1 of 3 Feature Advantages Low insertion loss Low signal loss results in better SNR in signal chain Fast roll-off Higher selectivity results in better adjacent channel rejection and dynamic range Wide stop band Wide spur-free stopband results in better receiver sensitivity Excellent power handling Well suited for transmitter applications Rugged Construction These filter assemblies have been qualified over a wide range of thermal, mechanical and environ- mental conditions including withstanding the stress of extensive solder reflow cycles Small Size Very well suited for high performance applications where size is a constraint. Temperature stability Very minimal change in electrical performance across temperature makes these filters suitable for a wide range of operating conditions.

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Surface Mount CBP-1413R5A+ Electrical Specifications (1) at 25°C CASE STYLE: KV1514 Parameter F# Frequency (MHz) Min. Typ. Max. Unit Pass Band Center Frequency - - - 1413.5 - MHz Insertion Loss F1-F2 1400-1427 - 2.5 3.0 dB VSWR F1-F2 1400-1427 - 1.5 2.1 :1 Stop Band, Lower Insertion Loss DC-F3 DC-1300 40 60 - dB F3-F4 1300-1350 20 30 dB VSWR DC-F4 DC-1350 - 20 - :1 Stop Band, Upper Insertion Loss F5-F6 1475-1520 20 30 - dB F6-F7 1520-2800 40 50 - dB VSWR F5-F7 1475-2800 - 20 - :1 Maximum Ratings Operating Temperature -40°C to 85°C Storage Temperature -55°C to 100°C RF Power Input 4 W Max. Permanent damage may occur if any of these limits are exceeded. REV.OR M168994 CBP-1413R5A+ EDU3183 URJ 181001 Page 2 of 3 Typical Frequency Response Functional Schematic F1 F2 FREQUENCY (MHz) INSERTION LOSS (dB) F5F4 F6DC F3 F7 RF IN RF OUT +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications 50Ω 1400 to 1427 MHz Bandpass Filter

Applications

  • Test and measurement
  • Radio Astronomy
  • Space research

Features

  • Fast roll-off
  • Low passband IL
  • Good VSWR 1.4:1 typical
  • Miniature shielded package Typical Performance Data at 25°C Frequency (MHz) Insertion Loss (dB) VSWR (:1) Frequency (MHz) Group Delay (ns) 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 1375 1390 1405 1420 1435 1450 VSWR FREQUENCY (MHz) CBP-1413R5A+ VSWR 1370 1380 1390 1400 1410 1420 1430 1440 1450 1460 INSERTION LOSS (dB) FREQUENCY (MHz) CBP-1413R5A+ INSERTION LOSS (Zoomed) 1380 1390 1400 1410 1420 1430 1440 1450 GROUP DELAY (ns) FREQUENCY (MHz) CBP-1413R5A+ GROUP DELAY 0 500 1000 1500 2000 2500 3000 INSERTION LOSS (dB) FREQUENCY (MHz) CBP-1413R5A+ INSERTION LOSS (Full band) (1) Measured on Mini-Circuits Characterization Test Board TB-578+.

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits CBP-1413R5A+ 345678 16 15 14 13 12 11 3 4 56 7 8 16 15 14 13 12 11 METALLIZATION SOLDER RESIST PCB Land Pattern A B C DE F G J K DFM NN H P Q R S T U V L Suggested Layout, Tolerance to be within ±.002 Outline Drawing INPUT 1 OUTPUT 10 Pad Connections Demo Board MCL P/N: TB-578+ Suggested PCB Layout (PL-331) inch mmOutline Dimensions ( ) A .550 13.97 B 1.040 26.24 C .225 5.72 D .160 4.06 E .120 3.05 F .077 1.96 G .070 1.78 H .160 4.06 J .590 14.99 K 1.080 27.43 L .100 2.54 M .140 3.56 N .230 5.84 P .180 4.57 Q .195 4.95 R .115 2.92 S .780 19.81 T .290 7.37 U .110 2.79 V .100 2.54 Wt. grams 4.8 Page 3 of 3