CBMF1608T1R0MR

CBX20120T100XXXXX TAIYO-YUDEN | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 11

Technical content

notice_e-01 Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS ■ Product information in this catalog is as of October 2011. All of the contents specified herein are subject to change wi thout notice due to technical improvements, etc. Therefore, please check for the latest information carefully be - for e practical application or usage of the Products. P lease note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo - ra ting such products, which are caused under the conditions other than those specified in this catalog or individual sp ecification. ■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is av ailable. ■ Please conduct validation and verification of products in actual condition of mounting and operating environment be fore commercial shipment of the equipment. All electronic components or functional modules listed in this catalog are developed, designed and intended for us e in general electronics equipment.(for AV, office automation, household, office supply, information service, te lecommunications, ( such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, di saster prevention, medical, public information network (telephone exchange, base station) etc. which may have di rect influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance. D o not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma - ri ne system, military, etc. where higher safety and reliability are especially required. I n addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil - it y evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to in stall a protective circuit is strongly recommended at customer's design stage. The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu - to rs (so called “TA IYO YUDEN’s official sales channel ”). It is only applicable to the products purchased from any of TAIYO YUDEN ’ s of ficial sales channel. ■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc - cu r in connection with a third party's intellectual property rights and other related rights arising from your usage of pr oducts in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights. Caution for export C ertain items in this catalog may require specific procedures for export according to “Fo reign Exchange and For - eign Trade Control Law ” o f Japan, “U.S. Export Administration Regulations ”, and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff.

72 wound02_e-02 ■ FEATURES ■ ORDERING CODE ■ EXTERNAL DIMENSIONS/STANDARD QUANTITY ■ AVAILABLE INDUCTANCE RANGE ■ APPLICATIONS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. Recommended Land Patterns Surface Mounting ・ Mounting and soldering con- Mounting and soldering con - ditions should be checked beforehand. ・ Applicable so ldering process to those products is reflow so ldering only. ・ R ecommended Land Patterns CB-series are Wound Chip Inductors having wide line-up, which are suitable for any circuit designs. ◦ CBC series has large rated current. They contribute to the miniatur - iz ation of the power supply circuit. ◦ CB L series has low profile characteristic. They contribute to the low - er ing of the equipments. ◦ CB MF series has a low loss characteristic. WIRE-WOUND CHIP POWER INDUCTORS (CB SERIES) C B △ 2 0 1 2 T 1 0 0 △ △ △ △ △ ❶ ❷ ❸ ❹ ❺ ❻ ❼ ❽ ❶Type CB Wound chip power inductor ❽Internal code❼Special code △ Standard pr oducts R Low Rdc ty pe ❸External Dimensions 〔mm〕 2012（0805） 2 .0×1.25 ❺Nominal Inductance〔μH〕 ex ample 1R0 1 100 10 101 100 ※R=decimal point ❷Characteristic Spec △ Standard C High current L Lo w profile MF L ow loss ❻Inductance Tolerances〔％〕 K ±10 M ±20 ❹Packaging T Tape & Reel A A C B REFLOW ■ OPERATING TEMP. ◦ They are suitable for an anti-noise measure on the power supply circuit of DSC, DVC, HDD, LCD-TV, mobile phones,PC, game equipments, various communication equipments and etc.. ◦ －40 ～105℃ （In cluding-self-generated heat ） Unit：mm TYPE A B C MF1608 0.55 0.7 1.0 2012 0.60 1. 0 1.45 16 0.60 1. 0 1.8 18 0.60 1. 5 2.0 18 0.85 1. 7 2.0 25 0.85 1. 7 2.7 Type L W T e Standard Quantity [pcs] Pa per Tape Embossed Ta pe CBMF1608 1.6±0.2 （0.063±0.008） 0.8±0.2 （0.031±0.008） 0.8±0.2 （0.031±0.008） 0.45±0.15 CBL2012 2.0±0.2 （0.079±0.008） 1.25±0.2 （0.049±0.008） 0.9±0.1 （0.035±0.004） 0.5±0.2 CB2012 CBC2012 2.0±0.2 （0.079±0.008） 1.25±0.2 （0.049±0.008） 1.25±0.2 （0.049±0.008） 0.5±0.2 CB2016 CBC2016 2.0±0.2 （0.079±0.008） 1.6±0.2 （0.063±0.008） 1.6±0.2 （0.063±0.008） 0.5±0.2 CB2518 CBC2518 2.5±0.2 （0.098±0.008） 1.8±0.2 （0.071±0.008） 1.8±0.2 （0.071±0.008） 0.5±0.2 CBC3225 3.2±0.2 （0.126±0.008） 2.5±0.2 （0.098±0.008） 2.5±0.2 （0.098±0.008） 0.6±0.3 Unit：mm（inch） Range Type CBMF1608 CBL2012 CB2012 CBC2012 CB2016 CBC2016 CB2518 CBC2518 CBC3225 Inductance ［μH］ 100 47μH 47μH 60 7 47μH 70 4.5 110 8 60 2.1 160 3.7 270 1.4 1000 100μH 100μH 100μH 25 24 60 28 100 13680μH 1000μH 1000μH

73wound02_e-02 INDUCTORS ʗPOWER INDUCTORS ■ PART NUMBERS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

• 1608（0603）TYPE Ordering code EHS （Environmental Hazardous Substances） Inductance 〔 μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕 min. Resistance DC Rated curr ent 〔mA〕 Measuring frequency 〔MHz〕 Sa turation current Idc1 Temperature rise current Idc2 CB MF1608T1R0M RoHS 1.0 ±20% 0 0.09 290 770 7.96CBMF1608T2R2M RoHS 2.2 80 0.17 190 560 CBMF1608T3R3M RoHS 3.3 60 0.22 170 500 CBMF1608T4R7M RoHS 4.7 45 0.24 145 470 CBMF1608T100□ RoHS 10 ±10% ±20% 32 0.36 115 380 2. 52CBMF1608T220 □ RoHS 22 16 1.0 70 230 CBMF1608T470□ RoHS 47 11 2.5 50 140 ・□Please specify the Inductance tolerance code （Ｋor Ｍ）
• 2012(0805)TYPE
• 2016（0806）T YPE Ordering code EHS （Environmental Hazardous Substances） Inductance 〔 μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕 min. Resistance DC Rated curr ent 〔mA〕 Measuring frequency 〔MHz〕 Sa turation current Idc1 Temperature rise current Idc2 CB 2 012T1R0M RoHS 1. 0 ±20% 0 0.15 500 900 7.96 CB 2012T2R2M RoHS 2. 2 80 0.23 410 770 CB 2012T3R3M RoHS 3. 3 55 0.30 330 650 CB 2012T4R7M RoHS 4.7 45 0.40 300 580 CB 2012T6R8M RoHS 6.8 38 0.47 250 540 CB 2012T100□ RoHS 10 ±10% ±20% 32 0.70 190 440 2.52 CB 2012T100□ R RoHS 10 32 0.50 200 520 CB 2012T150□ RoHS 15 28 1.3 170 320 CB 2012T220□ RoHS 22 16 1.7 135 280 CB 2012T470□ RoHS 47 11 3.7 90 190 CB 2012T680□ RoHS 68 1 0 6.0 70 140 CB 2012T101□ RoHS 10 0 8 7.0 60 130 0.796 ・□Please specify the Inductance tolerance code （Ｋor Ｍ） Ordering code EHS （Environmental Hazardous Substances） Inductance 〔 μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕 min. Resistance DC Rated curr ent 〔mA〕 Measuring frequency 〔MHz〕 Sa turation current Idc1 Temperature rise current Idc2 CB 2 016T1R0M RoHS 1. 0 ±20% 0 0.09 600 1100 7.96 CB 2016T1R5M RoHS 1. 5 80 0.11 550 1000 CB 2016T2R2M RoHS 2. 2 70 0.13 510 1000 CB 2016T3R3M RoHS 3.3 55 0.20 400 800 CB 2016T4R7M RoHS 4.7 45 0.25 340 740 CB 2016T6R8M RoHS 6.8 38 0.35 300 600 CB 2016T100□ RoHS 10 ±10% ±20% 32 0.50 250 520 2.52 CB 2016T150□ RoHS 15 28 0.70 210 440 CB 2016T220 □ RoHS 22 16 1.0 165 370 CB 2016T330□ RoHS 33 14 1.7 130 270 CB 2016T470□ RoHS 47 11 2.4 110 240 CB 2016T680□ RoHS 68 1 0 3.0 90 210 CB 2016T101□ RoHS 10 0 8 4.5 70 170 0.796 ・□Please specify the Inductance tolerance code （Ｋor Ｍ） ※）T he saturation current value（I dc1） is the DC current value having inductance decrease down to 30%. （at 20℃） ※）The temperature rise current value（I dc2） is the DC current value having temperature increase up to 40 ℃. （at 20℃） Ordering code EHS （Environmental Hazardous Substances） Inductance 〔 μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕 min. Resistance DC Rated curr ent 〔mA〕 Measuring frequency 〔MHz〕 Sa turation current Idc1 Temperature rise current Idc2 CB C 2012T1R0M RoHS 1. 0 ±20% 0 0.19 700 840 7.96CB C2012T2R2M RoHS 2.2 70 0.33 530 640 CB C2012T4R7M RoHS 4.7 45 0.50 360 520 CB C2012T100□ RoHS 10 ±10% ±20% 40 1.2 240 340 2.52CB C2012T220□ RoHS 22 1 6 3.7 170 190 CB C2012T470□ RoHS 47 11 5.8 120 150 ・□Please specify the Inductance tolerance code （Ｋor Ｍ） Ordering code EHS （Environmental Hazardous Substances） Inductance 〔 μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕 min. Resistance DC Rated curr ent 〔mA〕 Measuring frequency 〔MHz〕 Sa turation current Idc1 Temperature rise current Idc2 CB L 2012T1R0M RoHS 1. 0 ±20% 100 0.15 620 950 0.1 CB L2012T2R2M RoHS 2.2 80 0.39 440 590 CB L2012T4R7M RoHS 4.7 45 0.66 275 490 CB L2012T100M RoHS 10 32 1.0 205 370 CB L2012T220M RoHS 22 2 3 2.1 150 250 CB L2012T470M RoHS 47 11 4.2 100 140 ・□Please specify the Inductance tolerance code （Ｋor Ｍ）

74 wound02_e-02 ■ PART NUMBERS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. Ordering code EHS （Environmental Hazardous Substances） Inductance 〔 μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕 min. Resistance DC Rated curr ent 〔mA〕 Measuring frequency 〔MHz〕 Sa turation current Idc1 Temperature rise current Idc2 CB C 2016T1R0M RoHS 1. 0 ±20% 0 0.10 1100 1100 7.96 CB C2016T1R5M RoHS 1.5 80 0.15 1000 1000 CB C2016T2R2M RoHS 2.2 70 0.20 750 720 CB C2016T3R3M RoHS 3.3 55 0.27 600 610 CB C2016T4R7M RoHS 4.7 45 0.37 550 530 CB C2016T6R8M RoHS 6.8 38 0.59 450 450 CB C2016T100□ RoHS 10 ±10% ±20 32 0.82 380 350 2.52 CB C2016T150□ RoHS 15 28 1.2 300 300 CB C2016T220□ RoHS 22 16 1.8 250 240 CB C2016T330□ RoHS 33 14 2.8 220 220 CB C2016T470□ RoHS 47 11 4.3 150 150 CB C2016T680□ RoHS 68 1 0 7.0 130 130 CB C2016T101□ RoHS 10 0 8 8.0 110 110 0.796 ・□Please specify the Inductance tolerance code （Ｋor Ｍ）

• 2518（1007）T YPE Ordering code EHS （Environmental Hazardous Substances） Inductance 〔 μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕 min. Resistance DC Rated curr ent 〔mA〕 Measuring frequency 〔MHz〕 Sa turation current Idc1 Temperature rise current Idc2 CB 2 518T1R0M RoHS 1. 0 ±20% 0 0.06 1200 1500 7.96 CB 2518T1R5M RoHS 1. 5 80 0.07 650 1400 CB 2518T2R2M RoHS 2. 2 68 0.09 510 1300 CB 2518T3R3M RoHS 3.3 54 0.11 440 1200 CB 2518T4R7MR RoHS 4.7 46 0.10 310 1200 CB 2518T4R7M RoHS 4.7 46 0.13 340 1100 CB 2518T6R8M RoHS 6.8 38 0.15 270 930 CB 2518T100□ RoHS 10 ±10% ±20% 30 0.25 250 820 2.52 CB 2518T150□ RoHS 15 23 0.32 180 650 CB 2518T220 □ RoHS 22 19 0.50 165 580 CB 2518T330□ RoHS 33 15 0.70 130 460 CB 2518T470□ RoHS 47 12 0.95 110 420 CB 2518T680□ RoHS 68 9.5 1.5 70 310 CB 2518T101□ RoHS 100 9.0 2.1 60 260 0.796 CB 2518T151□ RoHS 150 7.0 3.2 55 210 CB 2518T221□ RoHS 220 5.5 4.5 50 180 CB 2518T331□ RoHS 330 4.5 7.0 40 140 CB 2518T471□ RoHS 470 3.5 10 35 120 CB 2518T681□ RoHS 68 0 3.0 17 30 90 CB 2518T102□ RoHS 10 00 2.4 24 25 75 0.252 ・□Please specify the Inductance tolerance code （Ｋor Ｍ） Ordering code EHS （Environmental Hazardous Substances） Inductance 〔 μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕 min. Resistance DC Rated curr ent 〔mA〕 Measuring frequency 〔MHz〕 Sa turation current Idc1 Temperature rise current Idc2 CB C 2518T1R0M RoHS 1. 0 ±20% 100 0.08 1000 1200 7.96 CB C2518T1R5M RoHS 1. 5 80 0.11 950 1190 CB C2518T2R2M RoHS 2. 2 68 0.13 890 1100 CB C2518T3R3M RoHS 3.3 54 0.16 730 1020 CB C2518T4R7M RoHS 4.7 41 0.20 680 920 CB C2518T6R8M RoHS 6.8 38 0.30 550 740 CB C2518T100□ RoHS 10 ±10% ±20% 30 0.36 480 680 2.52 CB C2518T150□ RoHS 15 23 0.65 350 500 CB C2518T220 □ RoHS 22 19 0.77 320 460 CB C2518T330□ RoHS 33 15 1.5 270 320 CB C2518T470□ RoHS 47 12 1.9 240 290 CB C2518T680□ RoHS 68 9.5 2.8 200 200 CB C2518T101□ RoHS 100 9.0 3.7 160 170 0.796 CB C2518T151□ RoHS 150 7.0 6.1 140 130 CB C2518T221□ RoHS 220 5.5 8.4 115 110 CB C2518T331□ RoHS 330 4.5 12.3 100 90 CB C2518T471□ RoHS 47 0 3.5 22 80 70 CB C2518T681□ RoHS 68 0 3.0 28 65 60 ・□Please specify the Inductance tolerance code （Ｋor Ｍ） ※）T he saturation current value（I dc1） is the DC current value having inductance decrease down to 30%. （at 20℃） ※）The temperature rise current value（I dc2） is the DC current value having temperature increase up to 40 ℃. （at 20℃）

75wound02_e-02 INDUCTORS ʗPOWER INDUCTORS ■ PART NUMBERS ■ ELECTRICAL CHARACTERISTICS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

• 3225（1210）TYPE Ordering code EHS （Environmental Hazardous Substances） Inductance 〔 μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕 min. Resistance DC Rated curr ent 〔mA〕 Measuring frequency 〔MHz〕 Sa turation current Idc1 Temperature rise current Idc2 CB C 3225T1R0MR RoHS 1. 0 ±20% 0 0.055 2000 1440 0.1 CB C3225T1R5MR RoHS 1. 5 220 0.060 2000 1310 CB C3225T2R2MR RoHS 2. 2 190 0.080 2000 1130 CB C3225T3R3MR RoHS 3.3 160 0.095 2000 1040 CB C3225T4R7MR RoHS 4.7 70 0.100 1250 1010 CB C3225T6R8MR RoHS 6.8 50 0.120 950 940 CB C3225T100□R RoHS 10 ±10% ±20% 23 0.133 900 900 CB C3225T150□ R RoHS 15 20 0.195 730 850 CB C3225T220□R RoHS 22 17 0.27 620 780 CB C3225T330□R RoHS 33 13 0.41 500 570 CB C3225T470□R RoHS 47 10 0.67 390 480 CB C3225T680 □R RoHS 68 8 1 .0 320 410 CB C3225T101□R RoHS 10 0 6 1.4 270 340 CB C3225T221□R RoHS 220 3 2.5 190 190 CB C3225T821□R RoHS 820 1.8 12 110 110 CB C3225T102□R RoHS 1000 1.6 13 100 100 ・□Please specify the Inductance tolerance code （Ｋor Ｍ） ※）T he saturation current value（I dc1） is the DC current value having inductance decrease down to 30%. （at 20℃） ※）The temperature rise current value（I dc2） is the DC current value having temperature increase up to 40 ℃. （at 20℃） ■DC Bias characteristics Measured by HP4285A＋42841A Inductance ʤЖHʥ DC Bias ʤmAʥ CBMF1608 1 1 0 100 100 1000 100˘ 4R7M 1R0M Inductance ʤЖHʥ DC Bias ʤmAʥ CBL2012 1 1 0 100 100 1000 470M 100M 4R7M Inductance ʤЖHʥ DC Bias ʤmAʥ CB2012 1 1 0 0.1 1000 100 100 100001000 1R0M 101˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ CBC2016 1 1 0 0.1 1000 100 100 100001000 1R0M 101˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ CB2016 1 1 0 0.1 1000 100 100 100001000 1R0M 101˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ CB2518 1 1 0 0.1 1000 100 100 100001000 1R0M 101˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ CBC2518 1 1 0 0.1 1000 100 100 100001000 1R0M 101˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ CBC2012 1 1 0 0.1 100 100 1000 1R0M 470˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ CBC3225 1 1 0 0.1 100 1000 100 100001000 1R0MR 101˘R 102˘R 100˘R

wound0103_reli-PRP1wound0103_reli_e-01 ■ PACKAGING ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. ②Tape material ③Taping Dimensions ◦Embossed Tape （0.315 inches wide ） ◦Card board carrier tape （0.315 inches wide ） Type Chip cavity Insertion pitch Tape thickness A B F T K LBM 2016 1. 75±0.1 （0.069±0.004） 2.1±0.1 （0.083±0.004） 4.0±0.1 （0.157±0.004） 0.3±0.05 （0.012±0.002） 1.9max. （0.075max.） LEM 2520 2.3±0.1 （0.091±0.004） 2.7±0.1 （0.106±0.004） 4.0±0.1 （0.157±0.004） 0.3±0.05 （0.012±0.002） 2.1±0.1 （0.083±0.004） LBC3225/ CBC3225 2.8±0.1 （0.110±0.004） 3.5±0.1 （0.138±0.004） 4.0±0.1 （0.157±0.004） 0.3±0.05 （0.012±0.002） 4.0max. （0.157max.） LB3218 2.1±0.1 （0.083±0.004） 3.5±0.1 （0.138±0.004） 4.0±0.1 （0.157±0.004） 0.3±0.05 （0.012±0.002） 2.2max. （0.087max.） LB2518 / CB2518 LB C2518 / CBC2518 LB R2518 2.15±0.1 （0.085±0.004） 2.7±0.1 （0.106±0.004） 4.0±0.1 （0.157±0.004） 0.3±0.05 （0.012±0.002） 2.2max. （0.087max.） LB2016/ CB2016 LBC2016 / CBC2016 1.75±0.1 （0.069±0.004） 2.1±0.1 （0.083±0.004） 4.0±0.1 （0.157±0.004） 0.3±0.05 （0.012±0.002） 1.9max. （0.075max.） LB2012 / CB2012 LBC2012 / CBC2012 LBR2012 1.45±0.1 （0.057±0.004） 2.25±0.1 （0.089±0.004） 4.0±0.1 （0.157±0.004） 0.25±0.05 （0.010±0.002） 1.45max. （0.057max.） CBL2012 1.55±0.1 （0.061±0.004） 2.3±0.1 （0.091±0.004） 4.0±0.1 （0.157±0.004） 1.1max. （0.043max. ） 1.1max. （0.043max. ） LB1608 1.0±0.1 （0.039±0.004） 1.8±0.1 （0.071±0.004） 4.0±0.1 （0.157±0.004） 1.1max. （0.043max. ） 1.1max. （0.043max. ） LBMF1608 / CB MF1608 1.1±0.1 （0.043±0.004） 1.9±0.1 （0.075±0.004） 4.0±0.1 （0.157±0.004） 0.25±0.05 （0.010±0.002） 1.2max. （0.047max.） Unit：mm（inch） ①Minimum Quantity Type Standard Quantity ［pcs］ Papar Tape Em bossed Tape LB C3225/CBC3225 ー 1000 LB3218 ー 2000 LBR2518/LBC2518/LB251 /CB2518/CBC2518/LEM2520 ー 2000 LBM2016/LBC2016/ LB2016/CB2016/CBC2016 ー 2000 LB2012/LBC2012/LBR202 /CB2012/CBC2012 ー 3000 CBL2012 4000 ー LB1608 4000 ー LBMF1608/CBMF1608 ー 3000◦Embossed tape ④Leader and Blank Portion (10 pitches or more) (10 pitches or more) (5.9 inches or more) 150mm or more ⑤Reel Size The top tape requires a peel-off force 0.2 to 0.7N in the direction of the arrow as illustrated below. ⑥Top Tape Strength Pull direction 10.0ʶ1.5 (0.394ʶ0.059) П180 ʢП7.09 ) ʵ0.118 П60 ʢП2.36 )ʴ1 ʴ0.039 2.5 max ʢ0.098ʣ

wound0103_reli-PRP2 wound0103_reli_e-01 ■ RELIABILITY DATA ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 1.Operating temperature Range LB, LBC, LBR, LBMF Series ー40～＋105 ℃ （Including self-generated heat）CB, CBC, CBL, CBMF Series LBM Series LEM Series ー40～＋85 2.Storage LB, LBC, LBR, LBMF Series ー40～＋85 ℃CB, CBC, CBL, CBMF Series LBM, LEM Series 【Test Methods and Remarks】 Please refer the term of "7. storage conditions" in pr ecautions. 3.Rated Current LB, LBC, LBR, LBMF Series Within the specified toleranceCB, CBC, CBL, CBMF Series LBM, LEM Series 【Test Methods and Remarks】 LEM Series The maximum DC value having inductance decrease within 10％ and temperatur e increase within 20℃ by the application of DC bias. 4.Inductance LB, LBC, LBR, LBMF Series Within the specified toleranceCB, CBC, CBL, CBMF Series LBM, LEM Series 【Test Methods and Remarks】 LEM Series Measuring equipment：LCR Meter（HP4285A＋42851A or its equivalent ） Measuring frequency：Specified fr equency LB・LBC・LBR・CB・CBC・CBL・LBMF・CBMF・LBM Series Measuring equipment：LCR Mater（ HP4285A or its equivalent） 5.Q LB, LBC, LBR, LBMF Series CB, CBC, CBL, CBMF Series LBM, LEM Series Within the specified tolerance 【Test Methods and Remarks】 LEM Series Measuring equipment：LCR Meter （HP4285A＋42851A or its equivalent Measuring frequency：Specified fr equency LBM Series Measuring equipment ：LCR Mater（HP4285A or its equivalent ） 6.DC Resisitance LB, LBC, LBR, LBMF Series Within the specified toleranceCB, CBC, CBL, CBMF Series LBM, LEM Series 【Test Methods and Remarks】 Measuring equipment：DC Ohmmeter（HIOKI 3227 or its equivalent ） 7.Self-Resonant Frequency LB, LBC, LBR, LBMF Series Within the specified toleranceCB, CBC, CBL, CBMF Series LBM, LEM Series 【Test Methods and Remarks】 Measuring equipment：Impedance analyzer（HP4291A or its equivalent ） 8.Temperature Characteristic LBM2016 LEM2520 Inductance change:Within±5％ LB1608 LB2012 LBR2012 CB2012 CBL2012 LB2016 CB2016 LB2518 LBR2518 CB2518 LBC3225 CBC3225 Inductance change:Within±20％ LBMF1608 CBMF1608 LBC2016 CBC2016 LBC2518 CBC2518 LB3218 Inductance change:Within± 25％ LBC2012 CBC2012 Inductance change:Within± 35％ 【Test Methods and Remarks】 Change of maximum inductance deviation in step 1-5 LB, CB Series Step 1 2 3 4 5 Temperture（℃） 20 ー40 20 （Reference temperature ） ＋85 （Maximum operating temperature ） 20 LEM2520 Step 1 2 3 4 5 Temperture（℃） 20 ー25 20 （Reference temperature ） ＋85 （Maximum operating temperature ） 20 9.Rasistance to Flexure of Substrate LB, LBC, LBR, LBMF Series No damage.CB, CBC, CBL, CBMF Series LBM, LEM Series 【Test Methods and Remarks】 Warp： 2mm（ LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF Series） Pressing jig Board LBɾLBMFɾ CBMF1608 ɹ ɿ 0.8mm Others ɿ 1.0mm LEM2520：1.6mm 3mm （LEM2520） Test substrate: Board according to JIS C0051

wound0103_reli-PRP3wound0103_reli_e-01 ■ RELIABILITY DATA ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 10.Body Strength LB, LBC, LBR, LBMF Series No damage.CB, CBC, CBL, CBMF Series LBM, LEM Series 【Test Methods and Remarks】 LB・LBC・LBR・CB・CBC・CBL・LBM・LEM2520 Applied for ce：10N Duration：10sec. LB1608・LBMF1608・CBMF1608 Applied force：5N Duration：10sec. 11.Adhesion of terminal electrode LB, LBC, LBR, LBMF Series No abnormality.CB, CBC, CBL, CBMF Series LBM, LEM Series 【Test Methods and Remarks】 LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF・LEM2520 Applied force：10N to X and Y directions Duration：5 sec. Test substrate：Printed board LB1608・CBMF1608・LBMF1608 Applied force：5N to X and Y dir ections Duration：5 sec. Test substrate：Printed board 12.Resistance to vibration LB, LBC, LBR, LBMF Series Inductance change:Within±10％ No significant abnormality in appearance.CB, CBC, CBL, CBMF Series LBM, LEM Series Inductance change:Within±5％ No significant abnormality in appearance. 【Test Methods and Remarks】 LEM・LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF：According to JIS C5102 clause 8.2. Vibration type：A Dir ections：2 hrs each in X, Y and Z directions. T otal：6 hrs Frequency range：10 to 55 to 10 Hz （1min. ） Amplitude：1.5mm Mounting method：Soldering onto printed board Recovery：At least 2 hrs of recovery under the standar d condition after the test, followed by the measurement within 48 hrs. LEM：Recovery At least 1 hr of recovery under the standard condition after the test, followed by the measur ement within 2 hrs. 13.Drop test LB, LBC, LBR, LBMF Series CB, CBC, CBL, CBMF Series LBM Series LEM Series Inductance change:Within±5％ N o significant abnormality in appearance. 【Test Methods and Remarks】 LEM： Acceleration：980m/sec2 Duration：6msec Number of times：6 sides × 3 times Mounting method：Soldering onto printed board Recovery：At least 2 hrs of recovery under the standar d condition after the test, followed by the measurement within 48 hrs. LEM：Recovery At least 1 hr of recovery under the standard condition after the test, followed by the measur ement within 2 hrs. 14.Solderability LB, LBC, LBR, LBMF Series At least 90％ of surface of terminal electrode is cover ed by newCB, CBC, CBL, CBMF Series LBM, LEM Series 【Test Methods and Remarks】 LEM： Solder temperature：230±5 ℃ Duration：5±0.5sec. Flux：Methanol solution with 25％ of colophony LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF： Solder temperatur e：245±5℃ Duration：5±0.5sec Flux：Methanol solution with 25％ of colophony

wound0103_reli-PRP4 wound0103_reli_e-01 ■ RELIABILITY DATA ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 15.Resistance to soldering LB, LBC, LBR, LBMF Series Inductance change:Within±10％CB, CBC, CBL, CBMF Series LEM Series Inductance change:Within±5％ LEM2520 No significant abnormality in appearance. 【Test Methods and Remarks】 LEM： Reflow condition 3 times of reflow over at 220±5℃ for 40sec. MAX, With Peak temperatur e at 240±5℃ for 5 sec. MAX. （Refer to a Profile of chart below .） Flow condition Solder temperature：260±5℃ Duration：10±1sec. Once 3 times of reflow oven at 230℃ MIN for 40sec. with peak temperatur e at 260 ℃ for 5sec. 16.Resisitance to solvent LB, LBC, LBR, LBMF Series No significant abnormality in appearanceCB, CBC, CBL, CBMF Series LBM, LEM Series 【Test Methods and Remarks】 Solvent temperature：Room temperature T ype of solvent：Isopropyl alcohol Cleaning conditions：90s. Immersion and cleaning. 17.Thermal shock LB, LBC, LBR, LBMF Series Inductance change:Within±10％ No significant abnormality in appearance.CB, CBC, CBL, CBMF Series LBM Series LEM Series Inductance change :Within±10％ R12～4R7：30 min. 5R6～330：25 min. 390～820：20 min. 101：15 min. 【Test Methods and Remarks】 LEM : Conditions for 1cycle Step Temperature （℃） Duration（min） 1 ー40 30 2 ＋85 30 Number of cycle ：100 cycle Recovery ：At least 1 hr of recovery under the standar d condition after the test, followed by the measurement within 2 hrs. LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF： ー40～＋85 ℃, maintain times 30min. ,100 cycle Recovery：At least 2 hrs of recovery under the standar d condition after the test, followed by the measurement within 48 hrs. 18.Damp heat life test LB, LBC, LBR, LBMF Series Inductance change:Within±10％ No significant abnormality in appearance.CB, CBC, CBL, CBMF Series LBM Series LEM Series Inductance change :Within±10％ R12～4R7：30 min. 5R6～330：25 min. 390～820：20 min. 101：15 min. 【Test Methods and Remarks】 Temperatur e：60±2℃ Humidity：90～95％RH Duration：1000 hrs Recovery：At least 2 hrs of recovery under the standar d condition after the test, followed by the measurement within 48 hrs. LEM：Recovery At least 1 hr of recovery under the standard condition after the test, followed by the measur ement within 2 hrs. 19.Loading under damp heat life test LB, LBC, LBR, LBMF Series Inductance change:Within±10％ No significant abnormality in appearance.CB, CBC, CBL, CBMF Series LBM Series LEM Series Inductance change :Within±10％ R12～4R7：30 min. 5R6～330：25 min. 390～820：20 min. 101：15 min. 【Test Methods and Remarks】 Temperatur e：60±2℃ Humidity：90～95％RH Duration：1000 hrs Applied current：Rated current Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. LEM：Recovery At least 1 hr of recovery under the standard condition after the test, followed by the measur ement within 2 hrs.

wound0103_reli-PRP5wound0103_reli_e-01 ■ RELIABILITY DATA ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 20.High temperature life test LB, LBC, LBR, LBMF Series CB, CBC, CBL, CBMF Series Inductance change:Within±10％ No significant abnormality in appearance.LBM Series LEM Series Inductance change :Within±10％ R12～4R7：30 min. 5R6～330：25 min. 390～820：20 min. 101：15 min. 【Test Methods and Remarks】 Temperatur e：85±2℃ Duration：1000 hrs Recovery：At least 2 hrs of recovery under the standar d condition after the test, followed by the measurement within 48 hrs. LEM：Recovery At least 1 hr of recovery under the standard condition after the test, followed by the measur ement within 2 hrs. 21.Loading at high temperature life test LB, LBC, LBR, LBMF Series Inductance change:Within±10％ No significant abnormality in appearance. CB, CBC, CBL, CBMF Series LBM, LEM Series est Methods and Remarks】 Temperatur e：85±2℃ Duration：1000 hrs Applied current：Rated current Recovery：At least 2 hrs of recovery under the standar d condition after the test, followed by the measurement within 48 hrs. 22.Low temperature life test LB, LBC, LBR, LBMF Series Inductance change:Within±10％ No significant abnormality in appearance.CB, CBC, CBL, CBMF Series LBM Series LEM Series Inductance change :Within±10％ R12～4R7：30 min. 5R6～330：25 min. 390～820：20 min. 101：15 min. 【Test Methods and Remarks】 Temperatur e：－40±2 ℃ Duration：1000 hrs Recovery：At least 2 hrs of recovery under the standar d condition after the test, followed by the measurement within 48 hrs. LEM：Recovery At least 1 hr of recovery under the standard condition after the test, followed by the measur ement within 2 hrs. 23.Standard condition LB, LBC, LBR, LBMF Series Standard test conditions Unless specified, Ambient temperature is 20±15℃ and the Relative humidity is 65± 20％. If ther e is any doubt about the test results, further measurement shall be had within the following limits: Ambient Temperature: 20±2 Relative humidity: 65±5％ Inductance value is based on our standard measurement systems. CB, CBC, CBL, CBMF Series LBM, LEM Series

wound0103_reli-PRP6 wound0103_reli_e-01 ■ PRECAUTIONS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 1．Circuit Design Precautions ◆Operating environment 1． T he products described in this specification are intended for use in general electronic equipment,(office supply equipment, telecommunications systems, me asuring equipment, and household equipment). They are not intended for use in mission-critical equipment or systems requiring special quality and high reliability (traffic systems, safety equipment, aerospace systems, nuclear control systems and medical equipment including life-support systems,) where product failure might r esult in loss of life, injury or damage. For such uses, contact TAIYO YUDEN Sales Department in advance. 2．PCB Design Precautions ◆Land pattern design 1．Please contact any of our offices for a land pattern, and refer to a recommended land pattern of a right figure or specifications. Technical consider- ations PRECAUTIONS 【Recommended Land Patter ns】 Surface Mounting ・ Mounting and soldering conditions should be checked beforehand. ・ Applicable soldering process to those products is reflow soldering only. 3．Considerations for automatic placement Precautions ◆Adjustment of mounting machine 1. Excessive impact load should not be imposed on the products when mounting onto the PC boards. 2. Mounting and soldering conditions should be checked befor ehand. Technical consider- ations 1. When installing products, care should be taken not to apply distortion str ess as it may deform the products. 4．Soldering Precautions ◆Wave soldering （LEM T ype only） 1．For wave soldering,please apply conditions meeting the range of the specifed conditions in our catalog or the relevant specifications. ◆Reflow soldering （LB and CB Types ） 1．For reflow soldering with either leaded or lead-free solder,the profile specified in "point for controlling" is recommended. ◆Reflow soldering （LEM） 1．For r eflow soldering, please apply conditions meeting the range of the specified conditions in our catalog or the relevant specifications. ◆Recommended conditions for using a soldering ir on 1．Put the soldering iron on the land-pattern. Soldering iron's temperature - Below 350℃ Duration-3 seconds or less. The soldering iron shoud not come in contact with inductor directly. T echnical consider- ations ave soldering （LEM T ype only） 1．Components can be damaged by excessive heat where soldering conditions exceed the specified range. ◆Reflow soldering （LB and CB Types ） 1．Reflow profile 300 250 200 150 100 Pre-heat zone 90ʶ30 sec 30ʶ10 sec 230ˆ Minn Peak Temp: 260ʴ0/ʔ5ˆ 5 sec Max 180ˆ 150ˆ ◆Recommended conditions for using a soldering iron 1．Components can be damaged by excessive heat where soldering conditions exceed the specified range. 5．Cleaning Precautions ◆Cleaning conditions Washing by supersonic waves shall be avoided. Technical consider- ations ◆Cleaning conditions If washed by supersonic waves, the pr oducts might be broken. 6．Handling Precautions ◆Handling 1．There is a case that a characteristic varies with magnetic influence. ◆Br eakaway PC boards （splitting along perforations ） 1．Planning pattern configurations and the position of products should be carefully performed to minimize stress. ◆Mechanical considerations 1．Ther e is a case to be damaged by a mechanical shock. Technical consider- ations ◆Handling 1．Keep the inductors away fr om all magnets and magnetic objects. ◆Br eakaway PC boards （splitting along perforations ） 1．When splitting the PC board after mounting inductors, care should be taken not to give any stresses of deflection or twisting to the board. 2．Board separation should not be done manually, but by using the appropriate devices. ◆Mechanical considerations 1．Please do not give the inductors any excessive mechanical shocks. 7．Storage conditions Precautions ◆Storage 1．Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes and deterioration of taping/packaging materials may take place. Technical consider- ations ◆Storage 1．To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should be controlled. ・Recommended conditions Ambient temperature：0～40℃ ／ Humidity：Below 70% RH The ambient temperature must be kept below 30℃ even under ideal storage conditions, solderability of products electrodes may decrease as time passes. For this reason, LE type inductors should be used within one year from the time of delivery. LB type：Should be used within 6 months from the time of delivery. LE type：In case of storage over 6 months, solderability shall be checked before actual usage. LEM Type，LB Type，CB Type