CB61F EATON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

  • High Interrupting Ratings: 50A @ 125Vac / 300A @ 125Vdc
  • Wide Selection: ratings from 2 to 15 amps providing a range of solutions for applications requiring fast-acting performance
  • CQC Approved: Meets the growing market demand.
  • cULus Certified and PSE Level 1 Certified
  • Excellent Environmental Integrity: lead-free, halogen free and RoHS compliant, and present no disposal issues at end of life.
  • Solder immersion compatible
  • Wire-in-Air design

Applications

Primary circuit protection:

  • LCD/PDP TVs
  • Notebooks
  • Telecom/PoE
  • Industrial applications
  • LCD Monitors
  • Servers
  • Medical equipment
  • LCD backlight inverters
  • Power supplies
  • White goods Agency information
  • cULus: Standard UL 248-14, Guide JDYX, File E 19180 and Guide JDYX7, File E19180
  • PSE: JET 1641-31007-1003 (2A-5A),JET 1641-31007-1004 (6.3A-10A), JET 1641-31007-1005 (12-15A)
  • CQC: CQC09012040316 (2A-6.3A & 8A-10A) Ordering
  • Specify product and packaging code Environmental data
  • Mechanical Shock: MIL-STD-202G, Method 213B, Test Condition C (100 G’s peak for 6 milliseconds; half-sine waveform)
  • M echanical Vibration: MIL-STD-202G, Method 201,Test Condi tion A (10-55Hz , 0.06 inch, total excursion)
  • Insulation Resistance: MIL-STD-202, Method 302, Test Condition A (after opening) 10,000 ohms minimum
  • Resistance to Solder Heat: MIL-STD-202G, Method 210F, Test Condition D (10 sec, at 260°C); Test Condition A (350°C, 5s) for hand solder
  • Thermal Shock: MIL-STD-202, Method 107G, Test Condition B (-65°C to +125°C) CB61F Fast-acting surface mount Brick™ fuses Pb HALOGEN HFFREE Surface Mount Device Speci/f_ications Current Voltage Interrupting Typical Cold Typical Typical Agency Catalog Ratings Ratings Ratings (amps)* Resistance Melting Voltage Approvals Number (amps) Vac Vdc 125Vac 125Vdc ( Ω) I 2t (A2s)* Drop (mV)‡ cULus PSE CQC CB61F2A 2 125 125 100 300 0.039 0.85 100 X X X CB61F3A 3 125 125 100 300 0.025 2.08 100 X X X CB61F4A 4 125 125 100 300 0.017 4.4 93 X X X CB61F5A 5 125 125 100 300 0.013 7.7 90 X X X CB61F6.3A 6.3 125 125 100 300 0.010 13.7 90 X X X CB61F7A 7 125 125 100 300 0.009 15.6 85 X X CB61F8A 8 125 125 100 300 0.008 19.5 90 X X X CB61F10A 10 125 125 100 300 0.006 36 90 X X X CB61F12A 12 125 125 50 300 0.005 40 90 X X CB61F15A 15 125 125 50 300 0.004 56 85 X X * AC Interrupting Rating (measured at designated voltage, 100% power factor); DC Interrupting Rating (measured at designated voltage, time constant of less than 50 microseconds, battery source) Typical Cold Resistance (measured at 10% of rated current) * Typical Melting I2t (measured with a battery bank at rated DC voltage, 10x-rated current, time constant of calibrated circuit less than 50 microseconds) ‡ Typical Voltage Drop (measured at rated current after temperature stabilizes)

Fast-acting surface mount Brick™ fuses www.eaton.com/electronics Dimensions - mm Drawing Not to Scale Recommended Pad Layout Time-Current Curves 2A 3A 4A 6.3A 7A 8A 10A 12A 15A 1000 100 0.1 0.01 1 10 100 Current (A) Time (s)

1000 Eaton Boulevard

Cleveland, OH 44122 United States www.eaton.com/electronics © 2017 Eaton All Rights Reserved Printed in USA Publication No. 4377 BU-SB111447 May 2017 Eaton is a registered trademark. All other trademarks are property of their respective owners. CB61F Fast-acting surface mount Brick™ fuses Technical Data 4377 Effective May 2017 Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Recommend Reflow Profile Soldering Characteristics Wave Immersion  Reservoir Temperature: 260° C  Time in Reservoir : 10 Seconds Maximum Infrared Reflow  Temperature: 260° C  Time: 30 Seconds Maximum Hand Soldering  Maximum tip temperature: 350°C  Maximum soldering time: 5 seconds max Packaging Code Packaging Code Suffix Description -TR1 1000 Fuses in Tape and Reel on 7 inch (178mm) diameter reel -TR2 5000 Fuses in Tape and Reel on 13 inch (330mm) diameter reel