CB3-3I-16M0000 CTS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Document No. 008-0256-0 Page 1 - 4 Rev. F ٠ ٠ ٠CTS Electronic Components, Inc. ٠171 Covington Drive ٠Bloomingdale, IL 60108 ٠ ٠ ٠ ٠ ٠ ٠www.ctscorp.com ٠ ٠ ٠ Model CB3 & CB3LV HCMOS/TTL CLOCK OSCILLATOR
FEATURES
- Standard 7.0x5.0mm Surface Mount Footprint
- HCMOS/TTL Compatible
- Fundamental and 3RD Overtone Crystals
- Frequency Range 1.5 – 160 MHz
- Frequency Stability, ±50 ppm Standard (±25 ppm and ±20 ppm available)
- +3.3Vdc or +5.0Vdc Operation
- Operating Temperature to –40°C to +85°C
- Output Enable Standard
- Tape & Reel Packaging
- RoHS/Green Compliant (6/6)
ORDERING INFORMATION
OPERATING TEMPERATURE RANGE FREQUENCY IN MHz M Not all performance combinations and frequencies may be available. Contact your local CTS Representative or CTS Customer Service for availability. M - indicates MHz and decimal point. 3 C = -20°C to +70°C (standard) I = -40°C to +85°C FREQUENCY STABILITY 6 = ± 20 ppm 1 5 = ± 25 ppm 7 = ± 32 ppm 2 3 = ± 50 ppm (standard) 2 = ± 100 ppm 3] Frequency is recorded with only leading significant digits before the ‘M’ and 4 - 6 significant digits after the ‘M’ (including zeros). LV = +3.3Vdc Blank = +5.0Vdc [Ex. XMXXXXXX (3M579545), XXMXXXXX (14M31818), XXXMXXXX (125M0000)] 1] 6I Stability/Temperature combination is not available. 2] These stabilities are not recommended for new designs. 4] CTS Distributors may add a -T or -1 at the end of the part number to indicate Tape and Reel packaging. Example Part Number: CB3LV-3C-32M7680 or CB3-3I-32M7680
DESCRIPTION
The CB3/CB3LV is a ceramic packaged Clock oscillator offering reduced size and enhanced stability. The small size means it is perfect for any application. The enhanced stability means it is the perfect choice for today’s communications applications that require tight frequency control.
Document No. 008-0256-0 Page 2 - 4 Rev. F ٠ ٠ ٠CTS Electronic Components, Inc. ٠171 Covington Drive ٠Bloomingdale, IL 60108 ٠ ٠ ٠ Model CB3 & CB3LV 7.0x5.0mm Low Cost HCMOS/TTL Clock Oscillator
ELECTRICAL CHARACTERISTICS
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNIT Maximum Supply Voltage VCC - -0.5 - 7.0 V Storage Temperature TSTG - -55 - 125 °C Frequency Range CB3 - 1.5 - 107 CB3LV - 1.5 - 160 Frequency Stability ∆f/fO See Note 1 and Ordering Information - - 20, 25 or 50 ± ppm Aging ∆fF i r s t year - 3 5 ± ppm Operating Temperature Commercial -20 70 Industrial -40 85 Supply Voltage CB3 4.5 5.0 5.5 CB3LV 3.0 3.3 3.6 Supply Current Frequency Range, Tested load condition noted for typical values. CB3 1.5 MHz to 20 MHz C L=50pF
20.1 MHz to 80 MHz CL=50pF
80.1 MHz to 107 MHz CL=15pF
CB3LV 1.5 MHz to 20 MHz C L=15pF
20.1 MHz to 80 MHz CL=15pF
80.1 MHz to 160 MHz CL=15pF
1.5 MHz to 50 MHz
50.1 MHz to 80 MHz
80.1 MHz to 160 MHz
Logic '1' Level VOH CMOS Load 10 TTL LOAD 0.9*VCC VCC-0.6V -- Logic '0' Level VOL CMOS TTL Load -- 0.1*VCC 0.4 Output Current Logic '1' Level I OH VOH = 3.9V/2.2V VCC = 4.5V/3.0V - - -16/-8 Logic '0' Level IOL VOL = 0.4V VCC = 4.5V/3.0V - - +16/+8 Output Duty Cycle SYM @ 50% Level 45 - 55 % Rise and Fall Time @ 10% - 90% Levels, Tested load condition noted for typical values. CB3 1.5 MHz to 20 MHz C L=50pF 2.5 CB3LV 1.5 MHz to 20 MHz C L=15pF 1.5 Start Up Time TS Application of VCC -- 1 0 m s Enable Function Enable Input Voltage VIH Pin 1 Logic '1', Output Enabled 2.0 - - Disable Input Voltage VIL Pin 1 Logic '0', Output Disabled - - 0.8 Enable Time TPLZ Pin 1 Logic '1' -- 1 0 m s Standby Current IST Pin 1 Logic '0', Output Disabled -- 1 0 µ A Period Jitter, Pk-Pk - - -- 5 0 Period Jitter, RMS - - --5 Phase Jitter, RMS - Bandwidth 12 kHz - 20 MHz - - 1 Notes: V ps Inclusive of calibration @ 25°C, operating temperature range, supply voltage variation, load variation, and first year aging. Electrical and Waveform Parameters VCC ± 10 % V ICC mA V mA TR, TF ns Absolute Maximums fO MHz TA -° C 25
Document No. 008-0256-0 Page 3 - 4 Rev. F ٠ ٠ ٠CTS Electronic Components, Inc. ٠171 Covington Drive ٠Bloomingdale, IL 60108 ٠ ٠ ٠ Model CB3 & CB3LV 7.0x5.0mm Low Cost HCMOS/TTL Clock Oscillator MECHANICAL SPECIFICATIONS CMOS/TTL OUTPUT WAVEFORM TEST CIRCUIT, CMOS LOAD ENABLE TRUTH TABLE PIN 1 PIN 3 Logic ‘1’ Output Open Output Logic ‘0’ High Imp. D.U.T. PIN ASSIGNMENTS PIN SYMBOL DESCRIPTION
1 EOH Enable Input
2 GND Circuit & Package Ground
3 Output RF Output
4 V CC Supply Voltage
- – Manufacturing Site Code. [Note a dash may follow the site code and is acceptable.] 2. XXXMXXXXXX – Frequency is marked with only leading significant digits before the ‘M’ and 4 - 6 digits after the ‘M’ (including zeros). Ex. XMXXXXXX (3M579545) XXMXXXXX (14M31818) XXXMXXXX (125M0000) 3. YYWW – Date code, YY – year, WW – week. 4. ST – Frequency stability/temperature code. (Refer to Ordering Information.) NOTES 1. Termination pads (e4). Barrier-plating is nickel (Ni) with gold (Au) flash plate. 2. Reflow conditions per JEDEC J-STD-020. PERIOD (T) 90%, 80%, 2.4V 50%, 1.5V 10%, 20%, 0.5V DUTY CYCLE = t/T x 100 (%) V V OH OL Tr Tf UPTIME (t) POWER SUPPLY VM mA .01uF D.U.T. CL Including probe capacitance. Enable Input SUGGESTED SOLDER PAD GEOMETRY .200 [5.08] .165 [4.20] .071 [1.80] Key: [mm] Inch .079 [2.00] C BYPASS CBYPASS should be ≥ 0.01 uF. PACKAGE DRAWING (1.7) MAX (7.0 ±0.2) (5.08) 0.200 0.055 0.276 ±0.008 0.067 (5.0 ±0.2) 0.197 ±0.008 (1.4) 0.146 (3.7) Key: (mm) Inch PIN 1 IDENTIFIER 0.047 (1.2) CTS CB3 XXXMXXXXXX
- YYWW STV
Document No. 008-0256-0 Page 4 - 4 Rev. F ٠ ٠ ٠CTS Electronic Components, Inc. ٠171 Covington Drive ٠Bloomingdale, IL 60108 ٠ ٠ ٠ Model CB3 & CB3LV 7.0x5.0mm Low Cost HCMOS/TTL Clock Oscillator TAPE AND REEL INFORMATION Standard packaging is tape and reel for this product family. Device quantity is 1,000 pieces per 180mm reel. DIMENSIONS IN MILLIMETERS DIRECTION OF FEED 5.40 7.90 8.40 5.70 16.0 8.04.0 Ø1.50 1.75 2.10 2.40 Ø23 Ø180Ø60 Ø13 120° 17.5 2.0 ENVIRONMENTAL SPECIFICATIONS Temperature Cycle: 400 cycles from –55°C to + 125°C, 10 minute dwell at each temperature, 1 minute transfer time between temperatures. Mechanical Shock: 1,500g’s, 0.5mS duration, ½ sinewave, 3 shocks each direction along 3 mutually perpendicular planes (18 total shocks). Sinusoidal Vibration: 0.06 inches double amplitud e, 10 to 55 Hz and 20g’s, 55 to 2,000 Hz, 3 cycles each in 3 mutually perpendicular planes (9 times total). Gross Leak: No leak shall appear while imme rsed in an FC40 or equivalent liquid at +125°C for 20 seconds. Fine Leak: Mass spectrometer leak rates less than 2x10 -8 ATM cc/sec air equivalent. Resistance to Solder Heat: Pr oduct must survive 3 reflows of +260°C peak, 10 seconds maximum. High Temperature Operating Bias: 2,000 hours at +125° C, maximum bias, disregarding frequency shift. Frequency Aging: 1,000 hours at +85°C, full bias, less than ±5 ppm shift. Moisture Sensitivity Level: Level 1 per JEDEC J-STD-020.