CB15FP-S NKK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 6mm Process Sealed Tactiles Series CB Distinctive Characteristics Sealed construction prevents contact contamination and allows automated soldering and cleaning. .244” (6.2mm) square body allows compact mounting. Actuator and base meet UL flammability rating of 94V-0. Dome contact gives crisp tactile feedback to positively indicate circuit transfer and assures high reliability and long life – more than 100,000 operations. Crimped terminals ensure secure mounting and prevent dislodging during wave soldering. Insert molded terminals lock out flux, solvents, and other contaminants. Packaged in stick tube or partitioned tray. Actual Size

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 6mm Process Sealed Tactiles Series CB General Specifications Electrical Capacity (Resistive Load) Low Level: 50mA @ 24V DC maximum Other Ratings Contact Resistance: 100 milliohms maximum Insulation Resistance: 100 megohms minimum @ 250V DC Dielectric Strength: 250V AC minimum between contacts & between contacts & case for 1 minute minimum Mechanical Life: 100,000 operations minimum Electrical Life: 100,000 operations minimum Nominal Operating Force: 1.57N Total Travel: .010” (.250mm) Materials & Finishes Actuator: Glass fiber reinforced polyamide (UL94V-0) Case: Stainless steel Seal: Polytetrafluoroethylene Base: Polyphthalamide (UL94V-0) Movable Contacts: Beryllium copper with silver plating Stationary Contacts: Brass with silver plating Terminals: Brass with silver plating Environmental Data Operating Temperature Range: –25°C through +70°C (–13°F through +158°F) Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F) Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours Shock: 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) PCB Processing Soldering: Wave Soldering Recommended. See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. Cleaning: Automated cleaning. See Cleaning specifications in Supplement section. Standards & Certifications Flammability Standards: UL94V-0 actuator & base UL Recognition The CB Series tactiles have not been tested for UL recognition or CSA certification. or CSA Certification: These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy.

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 6mm Process Sealed Tactiles Series CB TYPICAL SWITCH ORDERING EXAMPLE 15CB SPST OFF-(ON) CircuitStraight PC Terminals Actuator Position ( ) = Momentary Switch Throw & Schematic Pole Model Normal Down Note: Terminal numbers are not actually on the switch. SP CB15 OFF (ON) POLE & CIRCUIT

15 SPST OFF (ON)

( ) = Momentary F DESCRIPTION FOR TYPICAL ORDERING EXAMPLE CB15FP POLE & CIRCUIT P TERMINALS P Straight PC PACKAGING S Stick-Tube

50 Pieces/Tube

Single Pole • Single Throw (6.2) .244 (6.2) .244 (3.0) Dia .118 (4.35) Dia .171 (4.0) .157 1 3 2 4 (0.7) Typ .028 3 1 (4.0) .157 (6.5) .256 (1.0) Dia Typ .039 SPST (3.1) .122 (3.5) .138 (6.5) .256 (0.3) Typ .012 (0.65) .026

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 6mm Process Sealed Tactiles Series CB PACKAGING KEYBOARD MATRIX Blue = PCB Trace, Black = Switch Circuit Switches must be ordered in 50-piece increments when stick-tube packaging is selected. S No Code Partitioned Tray Stick-Tube If ordered in less than 50-piece increments, the switches are packaged in a partitioned tray. Stick-Tube Dimensions Each stick-tube contains 50 switches (12.0) .472 (11.0) .433 (340.0) 13.386 These single pole, single throw switches can be used in a key- board matrix and, using strapped terminals, achieve a com- mon bus electrical configuration on a single-sided PC board. These single pole, single throw switches can be arranged on a single-sided PC board matrix with strapped terminals to achieve an X-Y type electrical interconnection. Blue = PCB Trace, Black = Switch Circuit Common Bus Matrix X-Y Matrix 1 2 3 654 7 8 9 B0A 345 A B 1 2 3 4 5 6 7 = ON K e y s ( S w i t c h e s ) PC T erminations1 2 3 654 7 8 9 B0A A B 1 2 3 4 5 6 7 8 9 10 11 12 13 = ON K e y s ( S w i t c h e s ) P C Te r m i n a t i o n s