CAY16-103J2

CAT16 BOURNS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Features

■ Lead free version available (see How to Order “Termination” options) ■ Lead free versions are RoHS compliant* ■ Convex and concave terminals ■ 2, 4 or 8 isolated elements available ■ Resistance tolerance ±1 % and ±5 % ■ Resistance range: 10 ohms to 1 megohm Specifications Requirement Characteristics Test Method Short Time Overload ±1 % (±2 % for CAT16-F8, -J8 & CAY16-J8) Rated Voltage X 2.5, 5 seconds Soldering Heat ±1 % 260 °C ±5 °C, 10 seconds ±1 second Temperature Cycling (5) ±1 % 125 °C (30 minutes) - normal (15 minutes) -30 °C (30 minutes) - normal (15 minutes) Moisture Load Life ±2 % (±3 % for CAT16-F8, -J8 & CAY16-J8) 1000 hours Load Life ±2 % (±3 % for CAT16-F8, -J8 & CAY16-J8) 1000 hours Characteristics Schematics Characteristics CAT16/CAY16 Number of Elements 2 (J2), 4 (F4, J4), 8 (F8, J8) Power Rating Per Resistor 62 mW (31 mW for CAY16-J8) Resistance Tolerance ±1 %, ±5 % Resistance Range: E24 (J), E96 + E24 (F) 10 ohms - 1 megohm Zero-Ohm Jumper < 0.05 ohm Max. Working Voltage 50 V (25 V for CAY16-J8) Operating Temp. Range -55 °C - 125 °C How To Order CA Y 16 - 103 J 4 __ Chip Arrays Type

• T = Concave
• Y = Convex Models
• J2 = 0606 Package Size
• F4, J4 = 1206 Package Size
• F8 = 2406 Package Size for CAT16
• J8 = 2406 Package Size for CAT16; Resistance Code
• 103 = 10 K ohms
• 1003 = 100 K ohms (1 % tolerance)
• 000 = Zero-ohm Resistance Tolerance
• J = ±5 % (Use “J” for zero-ohm jumper)
• F = ±1 % (4 resistor package and CAT16-F8) Resistors
• 2 = 2 Isolated Resistors
• 4 = 4 Isolated Resistors
• 8 = 8 Isolated Resistors Terminations*
• LF = Tin-plated (lead free)
• Blank = Solder-plated *Model CAY16-J8 is available only with tin-plated terminations. Soldering Profile for Lead Free Chip Resistors and Arrays 125 175 225 275 0 50 100 150 200 250 300 Time (seconds) Temperature (°C) 60 - 120 seconds 60 - 90 seconds 260 °C peak 190 °C 150 °C 220 °C Ramp Down 3 °C/second 255 °C Maximum of 20 seconds between +255 °C and +260 °C Ramp Up 3 °C/second maximum 10 seconds minimum <1> <1> *RoHS COMPLIANTVERSIONS AVAILABLE For Standard Values Used in Capacitors, Inductors, and Resistors, click here.

Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. CAT/CAY 16 Series - Chip Resistor Arrays DIMENSIONS ARE: MM (INCHES) Model A A B C D E F Dimensions Configurations A C B F D FE D FE CAT16-F4, -J4 A C B F CAT16-F8, -J8 A C B F CAT16-J2 AA' C B F CAY16-F4, -J4 AA' C B F CAY16-J8 C B F CAY16-J2 Rated power in percentage (%) Ambient Temperature (˚C) 0 -55 0 70 125 100 Derating Curve

Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. REV. 07/06 Model a b p f DIMENSIONS ARE: MM (INCHES) CAT/CAY 16 Series - Chip Resistor Arrays Land Patterns Packaging Dimensions Model a b c d e a f b p Solder resist Land Chip resistor array a f bp Solder resist Land Chip resistor array a f b Solder resist Land Chip resistor array p a f b p Solder resist Land Chip resistor array CAT16-F4, -J4, -F8, -J8 CAY16-F4, -J4, -J8 CAT16-J2 CAY16-J2 4.0 ± 0.1 (.158 ± .004) 2.0 + 0.1/-0.2 (.157 ± .004) 1.0 (.039) MAX. a cb 1.5 + 0.1 - 0 (.059 + .004 - 0) 180 (7.087) 2.0 ± 0.5 (.079 ± .020) (2.362) 21.0 ± 0.8 (.827 ± .031) 13.0 ± 0.5 (.511 ± .020) d e

• 5,000 pcs. per reel (J2, J4, CAY16-J8) 4,000 pcs. per reel (CAT16-F8, -J8)
• Paper tape

Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Cleaning A recommended cleaning method is shown in the following table. Component Placement a. Reduce the mechanical stress to a minimum during and after placing of the unit in order not to damage the terminals and protective coating. b. Misplacement of components may cause solder bridges. Soldering a. Reflow soldering: Recommendation is shown in the following chart. b. Wave soldering: Recommendation according to IEC standards. c. Hand soldering: Don’t touch the protective coating of the part. Solder within 3 seconds when the temperature is over 280 ºC. Cleaning Condition Solvents Dipping Ultrasonic Wave Washing 1 minute maximum Isopropyl alcohol 5 minutes maximum Power: 20 W/L Frequency: 10 to 100 kHz 250 200 150 100 Preheating Soldering Gradual Cooling Temperature (¡C) Chip Resistor Arrays - Application Note