CAT6219 ONSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
Features
- Guaranteed 500 mA Peak Output Current
- Low Dropout V oltage of 300 mV Typical at 500 mA
- Stable with Ceramic Output Capacitor
- External 10 nF Bypass Capacitor for Low Noise
- Quick−start Feature
- Under V oltage Lockout
- No−load Ground Current of 55 /C0109A Typical
- Full−load Ground Current of 85 /C0109A Typical
- ±1.0% Initial Accuracy (VOUT ≥ 2.0 V)
- ±2.0% Accuracy Over Temperature (VOUT ≥ 2.0 V)
- “Zero” Current Shutdown Mode
- Fold−back Current Limit
- Thermal Protection
- 5−lead TSOT−23 and 6−pad TDFN Packages
- These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant
Applications
- Cellular Phones
- Battery−powered Devices
- Consumer Electronics http://onsemi.com TSOT−23 TD SUFFIX CASE 419AE PIN CONNECTIONS RVYM MARKING DIAGRAMS VOUT BYP/ADJ VIN GND EN See detailed ordering and shipping information in the package dimensions section on page 9 of this data sheet.
ORDERING INFORMATION
TDFN−6 VP5 SUFFIX CASE 511AH ABYM VOUT BYP/ADJ NC VIN GND EN TAB (Top View) AB = CAT6219180, CAT6219VP5 Device Code Y = Production Year (last digit) M = Production Month: 1 − 9, A, B, C US= CAT6219−125, CAT6219−250, = CAT6219−300 Device Code RV= CAT6219−180, CAT6219−280, = CAT6219−285, CAT6219−330 Device Code UM = CAT6219−ADJ Device Code Y = Production Year (last digit) M = Production Month: 1 − 9, A, B, C USYM UMYM
Table 4. ELECTRICAL OPERATING CHARACTERISTICS (Note 3)
- Specification for 2.80 V output version unless specified otherwise.
- Dropout voltage is defined as the input−to−output differential at which the output voltage drops 2% below its nominal value measured at 1 V
differential. During test, the input voltage stays always above the minimum 2.3 V.
- Specification for 1.8 V output version.
- For V OUT < 2.0 V, the initial accuracy is ±2% and across temperature ±3%.
http://onsemi.com PACKAGE DIMENSIONS TSOT−23, 5 LEAD CASE 419AE−01 ISSUE O E1 E e b D c A TOP VIEW SIDE VIEW END VIEW L Notes: (1) All dimensions are in millimeters. Angles in degrees. (2) Complies with JEDEC MO-193. SYMBOL θ MIN NOM MAX /C0113 A b c D E e L 0º 8º 0.01 0.80 0.30 0.12 0.30 0.05 0.87 0.15
2.90 BSC
2.80 BSC
1.60 BSC
0.95 TYP
0.40
0.60 REF
0.25 BSC
1.00 0.10 0.90 0.45 0.20 0.50
http://onsemi.com PACKAGE DIMENSIONS TDFN6, 2x2 CASE 511AH−01 ISSUE A Notes: (1) All dimensions are in millimeters. (2) Complies with JEDEC standard MO-229. TOP VIEW SIDE VIEW BOTTOM VIEW FRONT VIEW DETAIL A PIN# 1 INDEX AREA DA e Lb A1 A3 DETAIL A DAP SIZE 1.8 x 1.2 PIN#1 IDENTIFICATION A SYMBOL MIN NOM MAX A 0.70 0.75 0.80 A1 0.00 0.02 0.05 A3 0.20 REF b 0.25 0.30 0.35 D 1.90 2.00 2.10 D2 1.50 1.60 1.70 E 2.00 E2 0.90 1.00 1.10 e 1.90
0.65 TYP
2.10 L 0.15 0.25 0.35
http://onsemi.com Example of Ordering Information (Note 9) Prefix Device # Suffix Company ID CAT 6219 Product Number 6219 T: Tape & Reel 3: 3,000 / Reel (TSOT−23) 4: 4,000 / Reel (TDFN) Tape & Reel (Note 13)(Optional) TD Package G G: NiPdAu Lead Finish −280 125: 1.25 V 180: 1.80 V 250: 2.50 V 280: 2.80 V 285: 2.85 V 300: 3.00 V 330: 3.30 V ADJ: Adjustable V OUT Voltage (Note 10) TD: TSOT−23 VP5: TDFN (Note 12) Orderable Part Number VOUT Voltage Package Shipping CAT6219−125TDGT3 1.25 V TSOT−23−5 3,000 / Tape & Reel CAT6219−180TDGT3 1.80 V TSOT−23−5 3,000 / Tape & Reel CAT6219−250TDGT3 2.50 V TSOT−23−5 3,000 / Tape & Reel CAT6219−280TDGT3 2.80 V TSOT−23−5 3,000 / Tape & Reel CAT6219−285TDGT3 (Note 10) 2.85 V TSOT−23−5 3,000 / Tape & Reel CAT6219−300TDGT3 3.00 V TSOT−23−5 3,000 / Tape & Reel CAT6219−330TDGT3 3.30 V TSOT−23−5 3,000 / Tape & Reel CAT6219ADJTD−GT3 1.25 V to 5 V TSOT−23−5 3,000 / Tape & Reel CAT6219180VP5GT4 (Note 11) 1.80 V TDFN−6 4,000 / Tape & Reel CAT6219VP5330GT4 (Note 11) 3.30 V TDFN−6 4,000 / Tape & Reel CAT6219ADJVP5GT4 (Note 11) 1.25 V to 5 V TDFN−6 4,000 / Tape & Reel 7. All packages are RoHS −compliant (Lead−free, Halogen−free). 8. The standard lead finish is NiPdAu pre −plated (PPF) lead frames. 9. The device used in the above example is a CAT6219−280TDGT3 (VOUT = 2.8 V, in a TSOT−23 package, NiPdAu, Tape & Reel, 3,000/Reel). 10.For other voltage options, please contact your nearest ON Semiconductor Sales office. 11. Part number is not exactly the same as the “Example of Ordering Information” shown above. For indicated part numbers there a re NO hyphens in the orderable part numbers. 12.Contact factory for availability. 13.For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Ree l Packaging Specifications Brochure, BRD8011/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. CAT6219/D PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative