CAT6218 ONSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
Features
- Guaranteed 300 mA Output Current
- Low Dropout V oltage of 180 mV Typical at 300 mA
- Stable with 1 /C0109F Ceramic Output Capacitor
- External 10 nF Bypass Capacitor for Low Noise
- Quick−start Feature
- No−load Ground Current of 55 /C0109A Typical
- Full−load Ground Current of 80 /C0109A Typical
- ±1.0% Initial Accuracy (VOUT ≥ 2.0 V)
- ±2.0% Accuracy Over Temperature (VOUT ≥ 2.0 V)
- “Zero” Current Shutdown Mode
- Fold−back Current Limit and Under−voltage Lockout
- Thermal Protection
- Thin SOT23−5 Package
- These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant
Applications
- Cellular Phones
- Battery−powered Devices
- Consumer Electronics http://onsemi.com TSOT−23 TD SUFFIX CASE 419AE PIN CONNECTIONS RUYM MARKING DIAGRAM (Top View) VOUT BYP VIN GND EN See detailed ordering and shipping information in the package dimensions section on page 9 of this data sheet.
ORDERING INFORMATION
Supply voltage input.1 Ground reference.2 Enable input (active high); a 2.5 M/C0087 pull−down resistor is provided. Optional bypass capacitor connec- tion for noise reduction and PSRR enhancing. LDO Output Voltage.5 FunctionPin # PIN FUNCTION Name VIN GND EN BYP VOUT RU= CAT6218 Device Code Y = Production Year (last digit) M = Production Month: 1 − 9, A, B, C
Table 3. ELECTRICAL OPERATING CHARACTERISTICS (Note 3)
- Specification for 2.80 V output version unless specified otherwise.
- Dropout voltage is defined as the input−to−output differential at which the output voltage drops 2% below its nominal value measured at 1 V
differential. During test, the input voltage stays always above the minimum 2.3 V.
- Specification for 1.8 V output version.
OUT < 2.0 V, the initial accuracy is ±2% and across temperature ±3%.
Figure 15. PSRR (30 mA Load) Figure 16. PSRR (200 mA Load)
http://onsemi.com PACKAGE DIMENSIONS TSOT−23, 5 LEAD CASE 419AE−01 ISSUE O E1 E e b D c A TOP VIEW SIDE VIEW END VIEW L Notes: (1) All dimensions are in millimeters. Angles in degrees. (2) Complies with JEDEC MO-193. SYMBOL θ MIN NOM MAX /C0113 A b c D E e L 0º 8º 0.01 0.80 0.30 0.12 0.30 0.05 0.87 0.15
2.90 BSC
2.80 BSC
1.60 BSC
0.95 TYP
0.40
0.60 REF
0.25 BSC
1.00 0.10 0.90 0.45 0.20 0.50
http://onsemi.com Example of Ordering Information (Note 9) Prefix Device # Suffix Company ID CAT 6218 Product Number 6218 T: Tape & Reel 3: 3,000 / Reel Tape & Reel (Note 11) (Optional) TD Package TD: TSOT−23 G G: NiPdAu Lead Finish −180 150: 1.50 V 180: 1.80 V 240: 2.40 V 250: 2.50 V 270: 2.70 V 280: 2.80 V 285: 2.85 V 300: 3.00 V 320: 3.20 V 330: 3.30 V V OUT Voltage (Note 10) Orderable Part Number VOUT Voltage Package Shipping CAT6218−150TDGT3 1.50 V TSOT−23 3,000 / Tape & Reel CAT6218−180TDGT3 1.80 V TSOT−23 3,000 / Tape & Reel CAT6218−240TDGT3 2.40 V TSOT−23 3,000 / Tape & Reel CAT6218−250TDGT3 2.50 V TSOT−23 3,000 / Tape & Reel CAT6218−270TDGT3 2.70 V TSOT−23 3,000 / Tape & Reel CAT6218−280TDGT3 2.80 V TSOT−23 3,000 / Tape & Reel CAT6218−285TDGT3 (Note 10) 2.85 V TSOT−23 3,000 / Tape & Reel CAT6218−300TDGT3 3.00 V TSOT−23 3,000 / Tape & Reel CAT6218−320TDGT3 (Note 10) 3.20 V TSOT−23 3,000 / Tape & Reel CAT6218−330TDGT3 3.30 V TSOT−23 3,000 / Tape & Reel 7. All packages are RoHS −compliant (Lead−free, Halogen−free). 8. The standard finish is NiPdAu. 9. The device used in the above example is a CAT6218−180TDGT3 (V OUT = 1.8 V, in a TSOT−23 package, NiPdAu, Tape & Reel, 3,000/Reel). 10.For other voltage options, please contact your nearest ON Semiconductor Sales office. 11. For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Ree l Packaging Specifications Brochure, BRD8011/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. CAT6218/D PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative