CA4-10_V01 ABB | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

ABB | 11 Catalogue Page 1SBC 101 066 S0201 AF09 ... AF38 3-pole Contactors Main Accessories Accessory fitting details for a 3-pole contactor AF09 ... AF38 Many configurations of accessories are possible depending on whether these are front-mounted or side-mounted. Contactor types Main poles Built-in auxiliary contacts Front-mounted accessories Side-mounted accessories Auxiliary contact blocks Electrical and mechanical interlock set Auxiliary contact blocks (between 2 contactors) 1-pole CA4 Left side Right side 1-pole CC4 2-pole CAT4-11 4-pole CA4 VEM4 2-pole CAL4-11 4 max. or 1 or 1 – + 1 – AF09 ... AF16 3 0 0 1 2 max. – – – + 1 + 1 3 max. – – + 1 + 1 or 1 4 max. or 1 or 1 – + 1 – AF09 ... AF16 3 0 1 0 2 max. or 1 – – + 1 + 1 AF26 ... AF38 3 0 0 0 3 max. – – + 1 + 1 or 1 Mounting positions Pos. 5 Pos. 3 Pos. 2 Pos. 1 Pos. 1 ± 30° +30° -30° Pos. 4 Protection against overloads with thermal or electronic overload relays The addition of an overload relay on the contactor does not prevent fitting of many other accessories as shown below. Contactor types Overload relays - direct mounting - no kit required AF09 ... AF38 TF42 thermal overload relay AF09 ... AF38 EF19 electronic overload relay AF26 ... AF38 EF45 electronic overload relay Contactors and main accessories (other accessories available) VE4 AF contactor 4-pole CA4 2-pole CAT4-11 1-pole CA4, CC4 VM4 1-pole CA4, CC4 2-pole CAL4-11 2-pole CAL4-11 AF contactor (without top mounted coil terminal block) TF42 EF.. Fixing clips TF42 EF.. AF contactor 1-pole CA4, CC4 VEM4 mechanical and electrical interlock set including: – VM4 mechanical interlock unit including 2 fixing clips – VE4 electrical interlock block with A2-A2 connection

The auxiliary contact blocks are used for the operation of auxiliary circuits and control circuits.

Description

Types of auxiliary contact blocks for standard industrial environments: – CA4 1 or 4-pole block, front-mounted, instantaneous with N.O., N.C. contacts – CC4 1-pole block, front-mounted, with N.O. leading contact or N.C. lagging contact – CAT4 2-pole block, front-mounted, instantaneous N.O. + N.C. contacts with A1 / A2 coil terminal connection on front face contactor type for compliance with the standard requirements (see terminal and marking positioning). The auxiliary contact blocks are equipped with screw type connecting terminals delivered open, protected against accidental direct contact and bear the corresponding function marking. Fitting Details - For each contactor refer to "Accessory Fitting Details" table. Ordering Details For contactors Auxiliary contacts Type Order code Pack(ing) Weight pieces kg (1 pce) Front-mounted instantaneous auxiliary contact blocks AF09 ... AF38 1 0 - - CA4-10 1SBN 010 110 R1010 1 0.014 1 0 - - CA4-10-T 1SBN 010 110 T1010 10 0.014 0 1 - - CA4-01 1SBN 010 110 R1001 1 0.014 0 1 - - CA4-01-T 1SBN 010 110 T1001 10 0.014 3 1 - - CA4-31M 1SBN 010 140 R1131 1 0.055 1 3 - - CA4-13M 1SBN 010 140 R1113 1 0.055 0 4 - - CA4-04M 1SBN 010 140 R1104 1 0.055 3 1 - - CA4-31E 1SBN 010 140 R1031 1 0.055 4 0 - - CA4-40E 1SBN 010 140 R1040 1 0.055 0 4 - - CA4-04E 1SBN 010 140 R1004 1 0.055 3 1 - - CA4-31U 1SBN 010 140 R1331 1 0.055 4 0 - - CA4-40U 1SBN 010 140 R1340 1 0.055 Front-mounted auxiliary contact blocks with N.O. leading contact and N.C. lagging contact AF09 ... AF38 - - 1 0 CC4-10 1SBN 010 111 R1010 1 0.014 - - 0 1 CC4-01 1SBN 010 111 R1001 1 0.014 Side-mounted instantaneous auxiliary contact blocks AF09 ... AF38 1 1 - - CAL4-11 1SBN 010 120 R1011 1 0.040 1 1 - - CAL4-11-T 1SBN 010 120 T1011 10 0.040 Front-mounted instantaneous auxiliary contact and A1/A2 coil terminal blocks Auxiliary Contact Blocks Accessories for AF09 ... AF38 3-pole Contactors Catalogue Page 12 | ABB

ABB | 13 Technical Data Types 1-pole CA4, 1-pole CC4, 4-pole CA4, 2-pole CAT4, 2-pole CAL4 Contact Utilization Characteristics according to IEC Standards IEC 60947-5-1 and EN 60947-5-1 Rated insulation voltage Ui acc. to IEC 60947-5-1 690 V Rated impulse withstand voltage Uimp 6 kV Rated operational voltage Ue max. 24 ... 690 V Conventional thermal current Ith - θ ≤ 40 °C 16 A Rated frequency limits 25 ... 400 Hz Rated operational current Ie / AC-15 24-127 V 50/60 Hz 6 A acc. to IEC 60947-5-1 220-240 V 50/60 Hz 4 A 400-440 V 50/60 Hz 3 A

500 V 50/60 Hz 2 A

690 V 50/60 Hz 2 A

Making capacity acc. to IEC 60947-5-1 10 x Ie AC-15 acc. to IEC 60947-5-1 Breaking capacity acc. to IEC 60947-5-1 10 x Ie AC-15 acc. to IEC 60947-5-1 Rated operational current Ie / DC-13 24 V DC 6 A / 144 W acc. to IEC 60947-5-1 48 V DC 2.8 A / 134 W

72 V DC 1 A / 72 W

110 V DC 0.55 A / 60 W 125 V DC 0.55 A / 69 W 220 V DC 0.27 A / 60 W 250 V DC 0.27 A / 68 W 400 V DC 0.15 A / 60 W 500 V DC 0.13 A / 65 W 600 V DC 0.1 A / 60 W Short-circuit protection gG type fuse 10 A Rated short-time withstand current Icw for 1.0 s 100 A θ = 40 °C for 0.1 s 140 A Minimum switching capacity 12 V / 3 mA with failure rate acc. to IEC 60947-5-4 10-7 Heat dissipation per pole at 6 A 0.1 W Mechanical durability Number of operating cycles 10 millions operating cycles Max. switching frequency 3600 cycles/h Max. electrical switching frequency for AC-15 1200 cycles/h for DC-13 900 cycles/h Contact Utilization Characteristics according to UL / CSA Standards UL 508, CSA C22.2 N°14 Rated insulation voltage Ui 600 V Max. rated voltage 600 V AC, 600 V DC Pilot duty A600, Q600 AC thermal rated current 10 A AC maximum volt-ampere making 7200 VA AC maximum volt-ampere breaking 720 VA DC thermal rated current 2.5 A DC maximum volt-ampere making-breaking 69 VA Connecting Characteristics Screw terminals (delivered in open position, screws of unused terminals must be tightened) All terminals M3.5 Rigid solid 1 x 1 ... 2.5 mm² 2 x 1 ... 2.5 mm² L Bars or lugs L < 8 mm Capacity acc. to UL/CSA 1 or 2 x AWG 18 ... 14 Stripping length 10 mm Degree of protection acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 IP20 Screwdriver type Flat Ø5.5 / Pozidriv 2 Tightening torque 1.2 Nm / 11 lb.in Auxiliary Contact Blocks Accessories for AF09 ... AF38 3-pole Contactors 1SBC 101 136 S0201Catalogue Page