CAT22C10 ONSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

Characteristics subject to change without notice.

FEATURES

I Fast RAM Access Times: –200ns –300ns I Infinite EEPROM to RAM Recall I CMOS and TTL Compatible I/O I Power Up/Down Protection I 100,000 Program/Erase Cycles (E2PROM) I Low CMOS Power Consumption: –Active: 40mA Max. –Standby: 30 µA Max. I JEDEC Standard Pinouts: –18-lead DIP –16-lead SOIC I 10 Year Data Retention I Commercial, Industrial and Automotive Temperature Ranges

DESCRIPTION

The CAT22C10 NVRAM is a 256-bit nonvolatile memory organized as 64 words x 4 bits. The high speed Static RAM array is bit for bit backed up by a nonvolatile EEPROM array which allows for easy transfer of data from RAM array to EEPROM (STORE) and from EEPROM to RAM (RECALL). STORE operations are completed in 10ms max. and RECALL operations typi- cally within 1.5µs. The CAT22C10 features unlimited RAM write operations either through external RAM PIN CONFIGURATION PIN FUNCTIONS Pin Name Function A0–A5 Address I/O0–I/O3 Data In/Out WE Write Enable CS Chip Select RECALL Recall STORE Store VCC +5V VSS Ground NC No Connect writes or internal recalls from EEPROM. Internal false store protection circuitry prohibits STORE operations when V CC is less than 3.0V. The CAT22C10 is manufactured using Catalyst’s ad- vanced CMOS floating gate technology. It is designed to endure 100,000 program/erase cycles (EEPROM) and has a data retention of 10 years. The device is available in JEDEC approved 18-lead plastic DIP and 16-lead SOIC packages. NC Vss CS STORE NC Vcc I/O3 I/O2 I/O1 I/O0 WE RECALL 18 1 Vcc I/O4 I/O3 I/O2 I/O1 Vss WE CS STORE RECAL L CAT22C10 256-Bit Nonvolatile CMOS Static RAM

Characteristics subject to change without notice. MODE SELECTION (1)(2)(3) Input Mode CSCSCSCSCS WEWEWEWEWE RECALLRECALLRECALLRECALLRECALL STORESTORESTORESTORESTORE I/O Standby H X H H Output High-Z RAM Read L H H H Output Data RAM Write L L H H Input Data (EEPROM → RAM) X H L H Output High-Z RECALL (EEPROM → RAM) H X L H Output High-Z RECALL (RAM → EEPROM) X H H L Output High-Z STORE (RAM → EEPROM) H X H L Output High-Z STORE BLOCK DIAGRAM POWER-UP TIMING (4) Symbol Parameter Min. Max. Units VCCSR V CC Slew Rate 0.5 0.005 V/ms Note: (1) RECALL signal has priority over STORE signal when both are applied at the same time. (2) STORE is inhibited when RECALL is active. (3) The store operation is inhibited when VCC is below ≈ 3.0V. (4) This parameter is tested initially and after a design or process change that affects the parameter. ROW SELECT COLUMN SELECT CONTROL LOGIC READ/WRITE CIRCUITS RECALL EEPROM ARRAY STOREA0 STORE RECALL CS WE I/O0 I/O1 I/O2 I/O3 STATIC RAM ARRAY

3 Doc No. MD-1082, Rev. R© 2009 SCILLC. All rights reserved. Characteristics subject to change without notice. ABSOLUTE MAXIMUM RATINGS* Voltage on Any Pin with Package Power Dissipation *COMMENT Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions outside of those listed in the operational sections of this specifica- tion is not implied. Exposure to any absolute maximum rating for extended periods may affect device perfor- mance and reliability. RELIABILITY CHARACTERISTICS Symbol Parameter Min. Max. Units Reference Test Method N END (1) Endurance 100,000 Cycles/Byte MIL-STD-883, Test Method 1033 TDR (1) Data Retention 10 Years MIL-STD-883, Test Method 1008 VZAP (1) ESD Susceptibility 2000 Volts MIL-STD-883, Test Method 3015 ILTH (1)(4) Latch-Up 100 mA JEDEC Standard 17 D.C. OPERATING CHARACTERISTICS VCC = +5V ±10%, unless otherwise specified. Limits Symbol Parameter Min. Typ. Max. Unit Conditions ICC Current Consumption 40 mA All Inputs = 5.5V (Operating) T A = 0°C All I/O’s Open ISB Current Consumption 30 µA CS = V CC (Standby) All I/O ’s Open ILI Input Current 10 µA0 ≤ VIN ≤ 5.5V ILO Output Leakage Current 10 µA0 ≤ VOUT ≤ 5.5V VIH High Level Input Voltage 2 V CC V VIL Low Level Input Voltage 0 0.8 V VOH High Level Output Voltage 2.4 V I OH = –2mA VOL Low Level Output Voltage 0.4 V I OL = 4.2mA VDH RAM Data Holding Voltage 1.5 5.5 V V CC CAPACITANCE TA = 25°C, f = 1.0 MHz, VCC = 5V Symbol Parameter Max. Unit Conditions C I/O(1) Input/Output Capacitance 10 pF V I/O = 0V C IN(1) Input Capacitance 6 pF V IN = 0V Note: (1) This parameter is tested initially and after a design or process change that affects the parameter. (2) The minimum DC input voltage is -0.5V. During transitions, inputs may undershoot to -2.0V for periods of less than 20 ns. Maximum DC voltage on output pins is V CC +0.5V, which may overshoot to VCC +2.0V for periods of less than 20 ns. (3) Output shorted for no more than one second. No more than one output shorted at a time. (4) Latch-up protection is provided for stresses up to 100 mA on address and data pins from -1V to V CC +1V.

Characteristics subject to change without notice. A.C. CHARACTERISTICS, Read Cycle VCC = +5V ±10%, unless otherwise specified. 22C10-20 22C10-30 Symbol Parameter Min. Max. Min. Max. Unit Conditions tRC Read Cycle Time 200 300 ns C L = 100pF tAA Address Access Time 200 300 ns +1TTL gate tCO CS Access Time 200 300 ns V OH = 2.2V tOH Output Data Hold Time 0 0 ns V OL = 0.65V tLZ(1) CS Enable Time 0 0 ns V IH = 2.2V tHZ (1) CS Disable Time 100 100 ns V IL = 0.65V A.C. CHARACTERISTICS, Write Cycle VCC = +5V ±10%, unless otherwise specified. 22C10-20 22C10-30 Symbol Parameter Min. Max. Min. Max. Unit Conditions tWC Write Cycle Time 200 300 ns tCW CS Write Pulse Width 150 150 ns tAS Address Setup Time 50 50 ns C L = 100pF tWP Write Pulse Width 150 150 ns +1TTL gate tWR Write Recovery Time 25 25 ns V OH = 2.2V tDW Data Valid Time 100 100 ns V OL = 0.65V tDH Data Hold Time 0 0 ns V IH = 2.2V tWZ (1) Output Disable Time 100 100 ns V IL = 0.65V tOW Output Enable Time 0 0 ns Note: (1) This parameter is tested initially and after a design or process change that affects the parameter.

5 Doc No. MD-1082, Rev. R© 2009 SCILLC. All rights reserved. Characteristics subject to change without notice. A.C. CHARACTERISTICS, Store Cycle VCC = +5V ±10%, unless otherwise specified. Limits Symbol Parameter Min. Max. Units Conditions tSTC Store Time 10 ms tSTP Store Pulse Width 200 ns C L = 100pF + 1TTL gate tSTZ (1) Store Disable Time 100 ns V OH = 2.2V, VOL = 0.65V tOST (1) Store Enable Time 0 ns V IH = 2.2V, VIL = 0.65V A.C. CHARACTERISTICS, Recall Cycle VCC = +5V ±10%, unless otherwise specified. Limits Symbol Parameter Min. Max. Units Conditions tRCC Recall Cycle Time 1.4 µs tRCP Recall Pulse Width 300 ns C L = 100pF + 1TTL gate tRCZ Recall Disable Time 100 ns V OH = 2.2V, VOL = 0.65V tORC Recall Enable Time 0 ns V IH = 2.2V, VIL = 0.65V tARC Recall Data Access Time 1.1 µs Note: (1) This parameter is tested initially and after a design or process change that affects the parameter.

Characteristics subject to change without notice. I/O path should be buffered. through the Input/Output pins (I/O0–I/O3). flexibility to use this part in battery operated systems. this, some additional buffering circuitry is recommended. Figure 1. Read Cycle Timing

9 Doc No. MD-1082, Rev. R© 2009 SCILLC. All rights reserved. Characteristics subject to change without notice. EXAMPLE OF ORDERING INFORMATION (1) Prefix Device # Suffix 22C10 W I T1 Product Number 22C10 20––CAT Company ID T: Tape & Reel 1: 1,000/Reel Package L: PDIP W: SOIC, JEDEC Speed 20: 200ns 30: 300ns Temperature Range I = Industrial (-40°C to +85°C) E = Extended (-40°C to +125°C)(3)

ORDERING INFORMATION

Notes: (1) The device used in the above example is a CAT22C10WI-20-T1 (SOIC, Industrial Temperature, 200ns, Tape & Reel, 1,000/Reel). (2) For additional package option please contact your nearest Catalyst Semiconductor Sales office. (3) Extended Temperature available upon request. srebmuNtraPelbaredrO )seciveDeerF-bProf( 02EL01C22TAC1 T-02-EW01C22TAC 03EL01C22TAC1 T-03-EW01C22TAC 02IL01C22TAC1 T-02-IW01C22TAC 03IL01C22TAC1 T-03-IW01C22TAC

Characteristics subject to change without notice.

REVISION HISTORY

40-rpA-61O o goleerfdaeLddA serutaeFetadpU noitarugifnoCniPetadpU noitamrofnIgniredrOetadpU rebmuNnoisiveRetadpU 80-nuJ-42P n oitamrofnIgniredrOfoelpmaxEetadpU 90-raM-71Q r otcudnocimeSNOottnirpenifdnaogolegnahC 90-luJ-13R n oitamrofnIgniredrOfoelpmaxEetadpU elbatnoitamrofnIgniredrOetadpU ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center: Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative