TVME200 TEWS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice. All trademarks mentioned are property of their respective owners. Issue 1.1.3 2019-09-25 TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19 e-mail: info@tews.com www.tews.com The Embedded I/O Company TVME200 VMEbus Carrier for 4 IndustryPacks®
Application Information
The TVME200 is 6U VMEbus Carrier for up to 4 single- size or 2 double-size IndustryPack (IP) modules used to build modular, flexible and cost effective I/O solutions for applications in process control, medical systems, telecommunication and traffic control. A set of 16-position rotary switches allows easy configuration of VME Short I/O and Memory addresses. Interrupt routing from the IP slots to the VME IRQ’s can be done in two ways: programmable by software or selection of predefined sets by a rotary switch. Four 50 pin 0.1 inch flat ribbon cable connectors mounted in the front panel of the TVME200 provide access to all IP I/O lines. Additional, on the TVME200-20R all I/O lines of ‘IP D’ are routed to VME P2 and 14 user selectable I/O lines of ‘IP C’ can be routed to VME P2 via a jumper field. Status indicators for IP access, +5V and +/-12V are provided. The IP power lines are fuse protected by self healing fuses and RF filtered. The operating temperature ranges between -40°C and +85°C. Technical Information Form Factor: VMEbus Board, 6U VMEbus Slave Interface: Short I/O: A16, D08/16, size: 1 Kbyte Standard memory: A24, D08/16 Size: programmable, 32 Kbytes to 2 Mbytes per IP Extended memory: A32, D08/16 Size: fixed, 8 Mbytes per IP Interrupts: IRQ1-7 ANSI/VITA 4-1995 compliant interface to IndustryPack modules IndustryPack slots: Four single-size or two double-size with front panel I/O 8 MHz interface, no DMA Routing of IP interrupt levels to VME IRQ1-7: programmable by software or selection of predefined sets by a rotary switch I/O access: 50 pin 0.1 inch flat ribbon cable connector per IP mounted in front panel Rear I/O of ‘IP C’ and ‘IP D’ (TVME200-20R only) Status LED’s ACK LED for each IP module +5V Power LED for each IP slot +12V and –12V Power LED Self healing fuses and RF-filtering on all IP power lines Operating temperature –40°C to +85°C
TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice. All trademarks mentioned are property of their respective owners. Issue 1.1.3 2019-09-25 TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19 e-mail: info@tews.com www.tews.com The Embedded I/O Company Order Information RoHS Compliant TVME200-10R 6U 4 Slot IndustryPack Carrier, 50 pin ribbon cable connectors (stacked version) TVME200-20R 6U 4 Slot IndustryPack Carrier, 50 pin ribbon cable connectors (stacked version), P2-I/O for IP-C/D For the availability of non-RoHS compliant (leaded solder) products please contact TEWS. Documentation TVME200-DOC User Manual Software CARRIER-SW-42 VxWorks Software Support (Legacy and VxBus-enabled Software Support) CARRIER-SW-82 Linux IP Carrier Software Support CARRIER-SW-95 QNX IP Carrier Software Support For other operating systems please contact TEWS.
Related Products
TA305 Cable Kit for Modules with 50 pin ribbon cable connector