CAR2512FP LINEAGEPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features: www.lineagepower.com/oem Lineage Power Lineage Power Lineage Power (China) 3000 Skyline Dr. 2841 Dow Avenue 1353 Chenqiao Road, Shanghai Sengpu Industrial Park Mesquite, TX 75149 Tustin, CA 92780 USA Shanghai, 201401 China Phone: (972) 284-2000 Phone: (714) 544-6665 Phone: 021 6710 8910 CAR2512FP Series

2500 Watt +12V Front End Power Supply

∎ Leading Edge Power Density, 27W/in3 in 1U Form Factor ∎ Works in Parallel with DC Input Models (CAR2412DC) ∎ I2C Serial Bus and PMBus Interface ∎ Up to 91.5% Efficiency (90% at 20% Load) ∎ Active Current Sharing (Single Wire) ∎ Remote On/Off, Remote Sense, Voltage Program Circuits ∎ Microprocessor Based Design Allows for Automatic Fan Speed Control ∎ Front Panel AC Access via IEC-320 Inlet KEY MARKET SEGMENTS & APPLICATIONS ∎ Distributed Power ∎ Storage Equipment ∎ Mid-High End Servers ∎ High-End Routers & Switchgear SPECIFICATIONS 2500 Watt 12V Front End Power Supply Input Voltage Range 180-264 VAC, 47-63 Hz, derate for 140-180 VAC Operation Input Current Maximum 16A @ 180VAC, Full Load (max) Inrush Current 40A max. cold start (per ETS 300 132-1 and Bellcore specifications) Input Protection One fuse (line) - 20A & 250Vac Type 3AB Axial Power Factor 0.99 typical complies with IEC555, EN60555-2, EN61000-3-2 Efficiency Up to 91.5% (90% eff. @ 20% load, 91.5% eff @ 30% load, 90.5% eff @ 50%, 88% @ 100% Load), Operating under 12V output @ 230 VAC (including ORing MOSFETS) Output Power 2500W at High Line Operation (180-264 VAC) Output Voltage Range 10.8V to 13.2Vdc via analog and I2C / PMBus Output Current 208 Amps @ 12 VDC Standby Bias Voltage 3.3VSB @ 1A, reference to Vout Return (optional 5VSB) Voltage Regulation ±2% of Vnom for any combination of line, load and temperature Ouput Ripple & Noise ±1% (pk-pk) @ 20MHz with 0.1μF ceramic and 10μF electrolytic caps at the output Transient Response 5% max deviation, recovery time 300μs @ 50% load step and di/dt < 1A/μs Switching Frequency 400khz typical or optimized for efficiency gains Hold-Up Time 12ms at full load measured down to 10.8V (with 230Vac). An early warning signal is provided 2ms prior to loss of output power. Ride thru is 8.3ms typically Remote On/Off TTL Compatible input, ON if >3V or open, OFF if <1V” Current Limit Protection 110-130% of Iout nominal Short Circuit Protection Self protected with auto recovery Over Voltage Protection Trip level: ≥14.8Vdc ± 1V, Reset condition by recycling the input or applying Remote On/Off Operating Temperature -10°C to +70°C Over Temperature Protection Non latching; protection active at 110°C internal temperature, restart at 95°C (typical) EMI FCC-B & EN55022-B with specified filter or at rack-level, GR-1089-CORE LED Indicators Two LED’s, 1st Led (Green = AC OK), 2nd LED (Green = DC OK / Red = Fault) Analog Status & Control Voltage Programming (V Prog), Load sharing (I Share), Remote ON/OFF, Current Monitor (I Monitor), Over temperature (Temp Warning), Fault, PS Present, Module Enable, AC OK, DC OK Digital Status & Control I 2C and PMBus Shock & Vibration Telcordia NEBS GR-63-CORE Level III Dimensions 14.88” x 4.00” x 1.65” / 378mm x 102mm x 41.9mm Weight 4.73lbs / 2.15kg Safety Approvals IEC/UL/CSA/EN60950-1, CE Mark (LVD), TUV Options 5VSB Output FEATURES BENEFITS High Power Density 27W/in3 More system space for application circuits and hardware Load Sharing & Fault Tolerant Excellent reliability in N+1 operation with AC or DC Input Versions Automatic Fan Speed Control Reduces audible noise and increases reliability High Efficiency under light Loads Supports Demands for Latest Server Farm Trends

www.lineagepower.com/oem Lineage Power Lineage Power Lineage Power (China) 3000 Skyline Dr. 2841 Dow Avenue 1353 Chenqiao Road, Shanghai Sengpu Industrial Park Mesquite, TX 75149 Tustin, CA 92780 USA Shanghai, 201401 China Phone: (972) 284-2000 Phone: (714) 544-6665 Phone: 021 6710 8910 CAR2512FP Series EFFICIENCY CURVE: CONNECTOR DRAWING: D C B A 1 2 3 4 5 6 P1 P3 P7P6P5P4P2 P8 P12P11P10P9 PART NUMBER DEFINITION GUIDE: Example: CAR2512FPB5Z0-1A 2500W / 12Vout / Bezel / 5VSB / 6 of 6 RoHS DC Output : Tyco P/N 6600122-7 (Rear side) / Mating Connector: Tyco P/N 6450171-5 All Dimensions in Inches (mm) Tolerance: .XX = ± .02 in (.50 mm) .XXX = ± .010 in (.254 mm) PIN OUT INFORMATION A1 VSB [3.3] C1 I Share P1 Output Return A2 PS Present C2 N/C P2 Output Returnt A3 Signal Return C3 Temp OK P3 Output Return A4 Write Protect C4 I2C Address (A0) P4 Output Returnt A5 Remote Sense (+) C5 I2C Address (A1) P5 Output Return A6 Remote Sense (-) C6 I2C Address (A2) P6 Output Return B1 Fault D1 V Prog P7 +Vout B2 I Monitor D2 OVP Test Point P8 +Vout B3 Module Enable D3 Remote ON/OFF P9 +Vout B4 VSB [3.3] Return D4 DC OK P10 +Vout B5 SDA D5 AC OK P11 +Vout B6 SCL D6 Interrupt P12 +Vout B=Bezel Option Blank=None Options YO=5 of 6 Compliant ZO=6 of 6 Compliant RoHS Rev. Blank = 3.3VSB 5 = 5VSB Standby Voltage CAR 25 12 F P x x xx -1A Series 25=2500W Output Current 12=12V Output Voltage F=Front End Type P=Positive Polarity 88% 90.5% 90% 91.5% 79% 81% 83% 85% 87% 89% 91% 93% 95% 10% 20% 40% 50% 60% 80% 100% % of Load @ 230Vac Efficiency %