CAP200 MACOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Catalog 1654770 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 6-04 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 © 2004 by Tyco Electronics Corporation. All Rights Reserved. KILOVAC, AMP, LOUVERTAC and TYCO are trademarks. Other products and company names mentioned herein may be trademarks of their respective owners. Product Facts I Designed to be the smallest, lightest weight, lowest cost sealed contactor in the industry with its current rating. I Built-in coil economizer – only 1.7W hold power @ 12VDC and it limits back EMF to 0V. (models requiring extenal economizer also available). I Optional auxiliary contact for easy monitoring of power contact postion. I Hermetically sealed – intrinsically safe, operates in explosive/harsh environments with no oxidation or contamination of coils or contacts, including long periods of non-operation. I Versatile coil and power connections. I UL Recognized for the U.S. and Canada (File E208033). I CE marked for EC applications. I AIAG QS9000 designed, built and approved Performance Data Parameter Units Value for CAP200 Series Contact Arrangement, power contacts 1 Form A (SPST-NO) Rated Operating Voltage VDC 12 - 900 Continuous (Carry) Current, Typical A 500 @ 85°C, 400 mcm conductors Consult Factory for required conductors for higher currents Make/Break Current at Various Voltages 1/ A See next page Break Current at 320VDC 1/ A 2,000, 1 cycle 3/ Contact Resistance, Typ. (@200A) mohms 0.2 Load Life Cycles See next page Mechanical Life Cycles 1 million Contact Arrangement, auxiliary contacts 1 Form A (SPST-NO) Aux. Contact Current, Max. A 2A @ 30VDC / 3A @ 125VAC Aux. Contact Current, Min. mA 100mA @ 8V Aux. Contact Resistance, Max. ohms 0.417@ 30VDC / .150 @ 125VAC Dielectric Withstanding Voltage Vrms 2,200 @ sea level Insulation Resistance @ 500VDC megohms 100 2/ Shock, 11ms 1/2 sine, peak, operating G 20 Vibration, sine, 80-2000Hz., peak G 20 Operating Temperature °C -40 to +85 Weight, Nominal lb.(kg) .95 (.43) 1/ Main power contacts 2/ 50 at end of life 3/ Does not meet dielectric & IR after test, 1700 amp for unit with Aux. Contacts 4/ Use with AMP LOUVERTAC 5-192013-9. Consult factory for threaded mount socket. Part Numbering System Typical Part Number CAP200 A A A N A Series: CAP200 = 500 Amp, 12-900VDC Contactor Contact Form: A = Normally Open H = Normally Open with Aux. Contacts Coil Voltage: A = 9-36VDC (1 = requires external coil economizer) D = 32-95VDC (2 = requires external coil economizer) J = 48-95VDC (3 = requires external coil economizer) Coil Wire Length: A = 15.3 in (390 mm) B = 6.0 in (152 mm) Coil Terminal Connector: N = None E = 9-pin subminiature “D” plug mounted on contactor housing F = 9-pin subminiature “D” plug mounted on 15.3 in (390 mm) flying leads. X = Special configuration (consult factory) Mounting & Power Terminals: A = Bottom Mount & Male 10mm x 8 Terminals C = Plug-in Terminals Coil Operating Voltage (valid over temperature range) Voltage (will operate) 9-36VDC 32-95VDC 48-95VDC Voltage (Max.) 36VDC 95VDC 95VDC Pickup (close) Voltage Max. 9VDC 32VDC 48VDC Hold Voltage (Min.) 7.5VDC 22VDC 34VDC Dropout (open) Voltage (Min.) 6VDC 18VDC 27VDC Inrush Current (Max.) 3.8A 1.3A 0.7A Inrush Time (Max.) 130ms 130ms 130ms For factory-direct application assistance, dial 800-253-4560, ext. 2053, or 805-220-2053. CAP200 Series Contactor With 1 Form A (SPST-NO) Contacts Rated up to 500 Amps, 12-900VDC
Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 Outline Dimensions AUXILIARY CONTACT LEADS COIL LEADS WHITE = AUXILIARY CONTACT (WHEN ORDERED) BLACK = – COIL RED = + COIL SEE COIL WIRE LENGTH IN P/N STAINLESS 2.85 ± .025 (72.3 ± .63) .5 ± .01 (12.6 ± .26) 2.05 ± .02 (52 ± .51) 2.58 ± .02 (65.6 ± .51) .55 ± .025 (14.04 ± .63) 2.20 ± .025 (55.81 ± .63) 2.04 ± .02 DIA (51.94 ± .51) 3.17 ± .01 (80.48 ± .26) 2.29 ± .02 DIA (58.19 ± .51) 1.05 ± .01 (26.67 ± .26) 1.65 ± .01 (42.0 ± .26) 2.688 ± .01 (68.28 ± .26) A1 "+" POSITIVE TERMINAL A2 "–" NEGATIVE TERMINAL.225 ± .01DIA (5.72 ± .26) M8 x 1.25 POWER TERMINALS (HARDWARE SUPPLIED):
2 X M8 WASHER, STAINLESS
2 X M8 LOCKWASHER – SPLIT RING, STAINLESS
2 X M8 x 1.25 NUT, STAINLESS TORQUE 80 TO 100 IN-LB (8.8 TO 11 NM) MOUNTING HARDWARE (NOT SUPPLIED):
2 X M5 BOLT
2 X M5 LOCKWASHER
2 X M5 NARROW WASHER
TORQUE 15 TO 30 IN-LB (1.7 TO 3.3 NM) Estimated Make & Break Power Switching Ratings Electrical Load Life Ratings for Typical Applications NOTES: 1) FOR RESISTIVE LOADS WITH 300µH MAXIMUM INDUCTANCE. 2) ESTIMATES BASED ON EXTRAPOLATED DATA. USER IS ENCOURAGED TO VERIFY RATING IN ACTUAL APPLICATION. 3) END OF LIFE WHEN DIELECTRIC STRENGTH BETWEEN TERMINALS FALLS BELOW 50MEGOHMS @ 500VDC. 4) THE MAXIMUM CONTACT MAKE AND BREAK POWER IS ESTIMATED AT 208KW. BREAK ONLY ABOVE 208KW TO AVOILD CONTACT WELDING. 100,000 10,000 1,000 100 1,000 10,000100101 Continuous Current Carry Region Non-continuous Current Carry Region200A Estimated Life (Cycles) Load Current (Amps)
1800 VDC
900 VDC
600 VDC
400 VDC
270 VDC
120 VDC
28 VDC
80% Minimum Pre Charge 90% Nominal Pre Charge mS Amps CAP200 CAPACITIVE MAKE TEST CURVES700 650 600 550 500 450 400 350 300 250 200 150 100 Make/Break Life Capacitive & Resistive Loads at 320VDC (1) (2) @90% capacitive pre-charge (make only) see chart below Cycles 50,000 @80% capacitive pre-charge (make only) see chart below Cycles 50 @200A make/break (2 consecutive, reverse polarity) (1) Cycles 12 2,000A (break only) (1) Cycles 1* (1) Resistive load includes inductance L = 25µH. Load @ 2500A tested @ 200µH. (2) Life based on projected Weibull Life with 95% teliability. * Does not meet dielectric and IR after test. For factory-direct application assistance, dial 800-253-4560, ext. 2053, or 805-220-2053. 1654770 – 2.5M – KRG – FP – 6-04 Printed in U.S.A. CAP200 Series (Continued)