CABS FOX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

1.2x1.0mm Ceramic SMD Crystal CABS DATASHEET 7/23/2020 - Added thickness info to termination metals, adjusted MSL info to include J -STD-033 and N/A. © Copyright 20 20 Fox Electronics . All rights reserved Title / Description: CABS SERIES STANDARD SPECIFICATIONS Drawing Number: CABS-DOC-1 Size: A Part Number: Cage: 61429 Draftsperson: BEC Approved: MAJ Revision Date: 07/23/2020 Page 1 of 2

  • Tolerances down to ±10 PPM
  • Stabilities down to ±10 PPM
  • Temperature Ranges as wide as -40ºC to +85ºC Frequency Range (MHz) Operating Mode Max ESR Ω 32.000 ~ 32.999999 Fundamental 100 33.000 ~ 36.999999 Fundamental 80 37.000 ~ 80.000 Fundamental 60
  • Available Operating Temperatures and Stabilities Operating Temperature ±10 PPM ±15 PPM ±20 PPM ±25 PPM -20 ~+70ºC O O O O -30 ~+85ºC X O O O -40 ~+85ºC X O O O Key: O=Available, X=Not Available
  • SPECIFICATIONS PARAMETERS MAX (unless otherwise noted) Frequency Range 32.000 ~ 80.000 MHz Frequency Tolerance @ 25ºC (See options on page 2) Frequency Stability, ref @ 25ºC (See options below) Temperature Range Operating (TOPR) Storage (TSTG) (See options below) -55ºC ~ +125ºC Shunt Capacitance (CO) 2 pF Load Capacitance (CL) (See options on page 2) Drive Level 100 µW (10µW typical) Aging per year ±3 PPM Maximum Soldering Temp / Time 260ºC / 10 Seconds x 2 Moisture Sensitivity Level (MSL) per J-STD-033 N/A Termination Finish Au (0.3~1µm) over Ni (1.27~8.89µm) Lead (Pb) Free Yes RoHS Compliant Yes, no exemptions REACH Compliant (latest version) Yes Note: Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, etc. may vary.

1.2x1.0mm Ceramic SMD Crystal CABS DATASHEET 7/23/2020 - Added thickness info to termination metals, adjusted MSL info to include J -STD-033 and N/A. © Copyright 20 20 Fox Electronics . All rights reserved Title / Description: CABS SERIES STANDARD SPECIFICATIONS Drawing Number: CABS-DOC-1 Size: A Part Number: Cage: 61429 Draftsperson: BEC Approved: MAJ Revision Date: 07/23/2020 Page 2 of 2

  • TAPE SPECIFICATIONS (millimeters) • REEL SPECIFICATIONS (millimeters) A B C D E F Reel QTY G H I J K L M 1.5 Available Options & Part Identification for CABS1 F CABS F F D M 40.0 F CABS F F D M 40.0 FOX Model Number Tolerance D = ±25 PPM E = ±20 PPM F = ±15 PPM H = ±10 PPM Stability D = ±25 PPM E = ±20 PPM F = ±15 PPM H = ±10 PPM Load Capacitance2 B = 6 pF V = 7 pF D = 8 pF E = 10 pF G = 12 pF Operating Temperature F = -20 ~ +70ºC K = -30 ~ +85ºC M = -40 ~ +85°C Frequency (MHz) 1Not all frequency, tolerance, stability, load, and operating temperature combinations may be available. 2Listed load capacitances represent the most commonly used. Other load capacitances are available. Corporate Headquarters

5570 Enterprise Parkway

Fort Myers, FL 33905 http://www.FOXONLINE.com Sales 1-239-693-0099 http://www.FOXONLINE.com/repdisty Tech Support http://www.FOXONLINE.com/email PRODUCT USE: Fox Electronics reserves the right to modify the products and/or specifications described herein at any time and at Fox Electronics' sole discretion. All information in this document, including descriptions of product features and performance, is subject to chang e without notice. Performance specifications and the operating parameters of the described produc ts are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any k ind, whether express or implied, including, but not limited to, the suitability of Fox Electronics' products for any particular purpose, an implied warranty of mercha ntability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does n ot convey any license under intellectual property rights of Fox Electronics or any third parties. Fox Electronics' products are not intended for use in applications involving extreme environmental conditions or in life supp ort systems or similar devices wh ere the failure or malfunction of a Fox Electronics product can be reasonably expected to significantly affect the health or safe ty of users. Anyone using a Fox Electronics product in such a manner does so at their own risk, absent an express, written agre ement by Fox Electronics. Fox Electronics and the Fox logo are registered trademarks of Fox Electronics. Product specification is subject to change wit hout notice. Other trademarks and service marks used herein, including protected names, logos and design s, are the property of Fox Electronics or their respective third -party owners. For datasheet type definitions and a glossary of common terms, visit http://www.foxonline.com/tgcrystals.html .