CAA572 TDK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 6
Technical content
MULTILAYER CERAMIC CHIP CAPACITORS October 2024 MULTILAYER CERAMIC CHIP CAPACITORS Automotive grade, MEGACAP type (Low resistance, inline type) CA series 2-line type CAA572 [6.0x5.0 mm] 3-line type CAA573 [6.0x7.5 mm] * Dimensions are typical values.
20241025 / mlcc_automotive_megacap_ca_en Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (2/6) MULTILAYER CERAMIC CHIP CAPACITORS REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products REMINDERS 1. The products listed in this specification are int ended for use in automotive applications under normal operation and usage conditions. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality requires a more stringent level of safety or reliability, or whose failure, malfunction or defect could cause serious damage to society, person or property. Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applications below or for any other use exceeding the range or conditions set forth in this specification sheet. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in this specification, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (electric trains, ships, etc.) (3) Medical equipment (excepting Pharmaceutical Affairs Law classification Class1,2) (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. In addition, although the products listed in this specification are intended for use in automotive applications as described above, they are not prohibited to use in general electronic equipment, whose performance and/or quality doesnt require a more stringent level of safety or reliability, or whose failure, malfunction or defect could not cause serious damage to society, person or property. Therefore, the description of this caution will be applied, when the products are used in general electronic equipment under a normal operation and usage conditions. 2. We may modify products or discontinue production of a product listed in this catalog without prior notification. 3. We provide Delivery Specification that explain precautions for the specifications and safety of each product listed in this catalog. We strongly recommend that you exchange these delivery specifications with customers that use one of these products. 4. If you plan to export a product listed in this catalog, keep in mind that it may be a restricted item according to the Foreign Exchange and Foreign Trade Control Law. In such cases, it is necessary to acquire export permission in harmony with this law. 5. Any reproduction or transferring of the contents of this catalog is prohibited without prior permission from our company. 6. We are not responsible for problems that occur related to the intellectual property rights or other rights of our company or a third party when you use a product listed in this catalog. We do not grant license of these rights. 7. This catalog only applies to products purchased through our company or one of our companys official agencies. This catalog does not apply to products that are purchased through other third parties. Notice: Effective January 2013, TDK will use a new catalog number which adds product thickness and packaging specification detail. This new catalog number should be referenced on all catalog orders going forward, and is not applicable for OEM part number orders. Please be aware the last five digits of the catalog number will differ from the item description (internal control number) on the product label. Contact your local TDK Sales representative for more information. (Example) Catalog issued date Catalog number Item description (on delivery label) Prior to January 2013 C1608C0G1E103J(080AA) C1608C0G1E103JT000N January 2013 and later C1608C0G1E103J080AA C1608C0G1E103JT000N
20241025 / mlcc_automotive_megacap_ca_en Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (3/6) MULTILAYER CERAMIC CHIP CAPACITORS CA series MEGACAP type (Low resistance, inline type) Type: CAA572 [6.0x5.0 mm], CAA573 [6.0x7.5 mm] ˙SERIES OVERVIEW CA series is a product with metal frames attached to MLCCs terminal electrodes. Unlike conventional MEGACAP CKG series which MLCCs are stacked vertically, CA series adopts the inline structure which MLCCs are arranged side by side and optimizes the metal-frame materials. As a result, CA series achieves the capacitance increment while suppressing the increase of product height and electrical resistance. ˙FEATURES ̋Unique structure achieves high capacitance, high reliability and low resistance. ̋Metal frame relieves mechanical stress and thermal shock. ̋Because MLCCs and metal frames are joined with both high-temperature solder and clamps, the risk of MLCC fall during reflow reduces. ̋Qualified based on AEC-Q200 ˙APPLICATION ̋X7x products: Smoothing and decoupling applications requiring high capacitance ̋C0G products: Resonant circuits for wireless power supply, OBC (On Board Charger), etc. ˙SHAPE & DIMENSIONS 2-line type 3-line type L Body length W Body width T Body height E Metal-frame width W T L E W T L E Dimensions in mm Dimensions are typical values. Please refer to web page for details (Click the part numbers on page 6 to see the web page). Type L W T E
20241025 / mlcc_automotive_megacap_ca_en Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (4/6) MULTILAYER CERAMIC CHIP CAPACITORS ˙CATALOG NUMBER CONSTRUCTION CA A 57 3 X7R 1V 157 M 670 L J (1)Series (2)Reserved code (3)Dimensions L x W (mm), (4) Structure Dimensions are typical values. (5)Temperature characteristics (6)Rated voltage (DC) (7)Nominal capacitance (pF) The capacitance is expressed in three digit codes and in units of pico Farads (pF). The first and second digits identify the first and second significant figures of the capacitance. The third digit identifies the multiplier. R designates a decimal point. （Example）0R5 = 0.5pF 101 = 100pF 225 = 2,200,000pF = 2.2μF (8)Capacitance tolerance (9)Thickness (10)Packaging style (11)Special reserved code Dimensions code Structure code Length Width Metal-frame width 57 2 6.00 5.00 1.20 57 3 6.00 7.50 1.20 Temperature characteristics Temperature coefficient or capacitance change Temperature range C0G 0±30ppm/ ℃ 55 to +125 ℃ X7R ±15% 55 to +125 ℃ X7S ±22% 55 to +125 ℃ Code Voltage (DC) 1E 25V 1V 35V 1H 50V 2A 100V 2V 350V 2W 450V 2J 630V 3A 1000V Code Tolerance G ± 2% J ± 5% M ±20% Code Thickness 640 6.40mm 670 6.70mm Code Style L 330mm reel, 12mm pitch Code Description J MEGACAP (with metal frame)
20241025 / mlcc_automotive_megacap_ca_en Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (5/6) MULTILAYER CERAMIC CHIP CAPACITORS ˙Click the charts for details. ˙For details such as the catalog numbers, please refer to the capacitance range table on page 6 and after. ˙Click the charts for details. ˙For details such as the catalog numbers, please refer to the capacitance range table on page 6 and after. Capacitance range chart CAA572 [6.0x5.0 mm], 2-line type Capacitance C0G X6T X7T X7S X7R (pF) Code 3A (1kV) (630V) (450V) (630V) (350V) (100V) (50V) (35V) (25V) 20,000 203 30,000 303 44,000 443 66,000 663 200,000 204 1,000,000 105 2,200,000 225 33,000,000 336 47,000,000 476 100,000,000 107 Standard thickness 6.40 mm 6.70 mm Capacitance range chart CAA573 [6.0x7.5 mm], 3-line type Capacitance C0G X6T X7T X7S X7R (pF) Code 3A (1kV) (630V) (450V) (630V) (350V) (100V) (50V) (35V) (25V) 99,000 993 300,000 304 1,500,000 155 3,300,000 335 47,000,000 476 68,000,000 686 150,000,000 157 Standard thickness 6.40 mm 6.70 mm
20241025 / mlcc_automotive_megacap_ca_en Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (6/6) MULTILAYER CERAMIC CHIP CAPACITORS Click the part numbers for details. Click the part numbers for details. Click the part numbers for details. Click the part numbers for details. Click the part numbers for details. Capacitance range table Temperature characteristic: C0G（55 to +125 ℃, 0±30ppm/ ℃） Capacitance Width (mm) Thickness (mm) Capacitance tolerance Catalog number Rated voltage Edc: 1kV Rated voltage Edc: 630V 20nF 5.60±0.50 6.40±0.50 ±2% CAA572C0G3A203G640LJ ±5% CAA572C0G3A203J640LJ 30nF 5.60±0.50 6.40±0.50 ±2% CAA572C0G3A303G640LJ ±5% CAA572C0G3A303J640LJ 44nF 5.60±0.50 6.40±0.50 ±2% CAA572C0G3A443G640LJ ±5% CAA572C0G3A443J640LJ 66nF 5.60±0.50 6.40±0.50 ±2% CAA572C0G3A663G640LJ ±5% CAA572C0G3A663J640LJ 99nF 8.40±0.50 6.40±0.50 ±2% CAA573C0G3A993G640LJ ±5% CAA573C0G3A993J640LJ 200nF 5.60±0.50 6.40±0.50 ±2% CAA572C0G2J204G640LJ ±5% CAA572C0G2J204J640LJ 300nF 8.40±0.50 6.40±0.50 ±2% CAA573C0G2J304G640LJ ±5% CAA573C0G2J304J640LJ Capacitance range table Temperature characteristic: X6T(55 to +105℃, +22, -33%) Capacitance Width (mm) Thickness (mm) Capacitance tolerance Catalog number Rated voltage Edc: 450V Capacitance range table Temperature characteristic: X7R (55 to +125℃, ±15%) Capacitance Width (mm) Thickness (mm) Capacitance tolerance Catalog number Rated voltage Edc: 50V Rated voltage Edc: 35V Rated voltage Edc: 25V 47μF 5.00±0.50 6.70±0.50 ±20% CAA572X7R1H476M670LJ CAA572X7R1V476M670LJ 68μF 7.50±0.50 6.70±0.50 ±20% CAA573X7R1H686M670LJ CAA573X7R1V686M670LJ 100μF 5.00±0.50 6.70±0.50 ±20% CAA572X7R1V107M670LJ CAA572X7R1E107M670LJ 150μF 7.50±0.50 6.70±0.50 ±20% CAA573X7R1V157M670LJ CAA573X7R1E157M670LJ Capacitance range table Temperature characteristic: X7S (55 to +125℃, ±22%) Capacitance Width (mm) Thickness (mm) Capacitance tolerance Catalog number Rated voltage Edc: 100V 33μF 5.00±0.50 6.40±0.50 ±20% CAA572X7S2A336M640LJ 47μF 7.50±0.50 6.40±0.50 ±20% CAA573X7S2A476M640LJ Capacitance range table Temperature characteristic: X7T (55 to +125℃, +22, 33%) Capacitance Width (mm) Thickness (mm) Capacitance tolerance Catalog number Rated voltage Edc: 630V Rated voltage Edc: 350V 1μF 5.00±0.50 6.40±0.50 ±20% CAA572X7T2J105M640LJ