CA7024 L-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Fault Mapper™ Cable Length Meter & Fault Locator Alphanumeric TDR Model CA7024 The Fault Mapper™ Model CA7024 is a handheld, alphanumeric, TDR (Time Domain Reflectometer) Cable Length Meter and Fault Locator, designed to measure the length of electrical and communication cables. It can also indicate the distance to a fault in the cable (open or short), given access to only one end of a two or more conductor cable. By incorporating fast-edge step TDR technology, the Model CA7024 measures cable length and indicates the distance to open or short circuit faults, to a range of 6000 ft (2000m), on virtually any type of cable. The Model CA7024 indicates the cable length or fault distance and description, alphanumerically on a 128 x 64 graphical LCD. An internal library of standard cable types enables accurate measurement without the necessity of entering Velocity of Propagation (Vp) information, and the Model CA7024 automatically compensates for different cable impedances. The Model CA7024 incorporates an oscillating tone generator that is detectable with a standard tone tracer for use in tracing cables and identification of cable location. The Model CA7024 also displays a “Voltage Detected” warning and sounds an alarm when connected to a cable energized by more than 10V, which prohibits testing. Fault Mapper™ Cable Length Meter & Fault Locator Alphanumeric TDR Model CA7024 (pdf) Rev. 02 02/04 Technical Assistance (800) 343-1391 www.aemc.com 1 of 5

Fault Mapper™ Cable Length Meter & Fault Locator Alphanumeric TDR Model CA7024 (pdf) Rev. 02 02/04 Technical Assistance (800) 343-1391 www.aemc.com 2 of 5

Features

  • Handheld Cable Length Meter and Fault Locator
  • Detect opens and shorts and the distance to them from one end of the cable
  • Measure cable length up to 6000 ft (2000m) in feet or meters
  • Automatic cable impedance compensation
  • Built-in library of most common cables and their Vp (Velocity of Propagation)
  • Manual selection of Vp for all cables not found in library
  • Vp setting displayed along with length and cable type (if in library)
  • Built-in tone generator for tracing and locating cables
  • Large high-visibility blue electroluminescent backlit display

Applications

  • Determine length of cables on reels, coils or in boxes
  • Determine cable runs in wall, conduit and other surfaces
  • Detect opens and shorts in cables and the length to them
  • Trace cables to identify runs and location Model CA7024 checking the length of cable on a reel. Model CA7024 includes meter, soft carrying case, BNC pigtail cable with alligator clips, four x 1.5V AA batteries and user manual

Range @ Vp = 70% 6000 ft (2000m) Resolution 0.1 to 100 ft, then 1 ft (0.1 up to 100m, then 1m) Accuracy* ±2% of Reading Minimum Cable Length 12 ft (4m) Cable Library Built-in, operator selectable Vp (Velocity of Propagation) Adjustable from 20 to 99% Output Pulse 5V (peak to peak) into open circuit; nanosecond rise Step Function Output Impedance Automatic compensation Tone Generator Oscillating tone 810 to 1110Hz Voltage Warning Triggers @ >10VAC/DC GENERAL Display Resolution 128 x 64 pixel graphical LCD Display Backlight Blue electroluminescent Power Source 4 x 1.5V AA Alkaline batteries Auto-Off After 3 minutes Languages English, French, German, Spanish, Portuguese, Italian Battery Life Standby mode >4000 hrs Continuous testing >7.5 hrs Storage Temperature -4° to 158°F (0° to 70°C); 5 to 95% RH non-condensing Operating Temperature 32° to 112°F (0° to 40°C); 5 to 95% RH non-condensing Dimensions 6.5 x 3.5 x 1.5" (165 x 90 x 37mm) Weight 12 oz (350g) SAFETY Safety Ratings EN 61010-1, EN 60950, EN 61326-1 CE Mark Yes *Measurement accuracy of ±2% assumes the instrument setting for Velocity of Propagation (Vp) of the cable under test to be accurately set, and homogeneity of the Velocity of Propagation (Vp) along the cable length. Fault Mapper™ Cable Length Meter & Fault Locator Alphanumeric TDR Model CA7024 (pdf) Rev. 02 02/04 Technical Assistance (800) 343-1391 www.aemc.com 3 of 5 Specifications ORDERING INFORMATION CATALOG NO. BNC input connector Alligator cable clips Alphanumeric backlit LCD Vp (Velocity of Propagation) decrement button Test/Function select button Backlight ON/OFF button Vp (Velocity of Propagation) increment button Mode select button (TDR or Tone Tracer) Power ON/OFF button BNC connector Construction (102mm) BNC input connector

Fault Mapper™ Cable Length Meter & Fault Locator Alphanumeric TDR Model CA7024 (pdf) Rev. 02 02/04 Technical Assistance (800) 343-1391 www.aemc.com 4 of 5 Volume control ON/OFF button Power ON LED Audio output jack Tone Receiver/ Cable Tracer Model TR02 Model TR02 The Tone Receiver/Cable Tracer Model TR02 is a small, handheld tracer that will aid in the identification of tone carrying wires without piercing their insulation. It has a self-contained amplifier and a rugged, moisture resistant mylar cone speaker. When used in conjunction with the tone transmitter function of the Models CA7024, CA7026 or CA7028, wire tracing and locating is quick and efficient. One button turns the unit on and, while it is depressed activates the receiver. A volume control allows you to set the speaker loudness to a desirable level. An audio output jack facilitates the use of an optional, commercially available ear piece which inhibits the Model TR02’s internal speaker. This provides quiet operation in office environments while allowing the operator to hear the signal clearly. Model TR02 used to find cables in a panel. Construction Specifications MODEL TR02 GENERAL Power Source 9V Alkaline Battery Dimensions 6.5 x 3.5 x 1.5" (165 x 90 x 37mm) Weight 12 oz (350g)

  • Compatible with AEMC Models CA7024, CA7026 and CA7028
  • Contains a frequency selective hi-gain, hi-impedance amplifier for clear pick-up
  • Rugged, moisture resistant mylar cone speaker
  • Convenient operation from a standard 9V battery
  • Volume control
  • Audio output
  • Pen size, fits into your pocket
  • Locate cable runs
  • Detect breaks in cables
  • Find cables in panels

Fault Mapper™ Cable Length Meter & Fault Locator Alphanumeric TDR Model CA7024 (pdf) Rev. 02 02/04 Technical Assistance (800) 343-1391 www.aemc.com 5 of 5 Contact Us United States & Canada: Chauvin Arnoux® , Inc. d.b.a. AEMC® Instruments 200 Foxborough Blvd. Foxborough, MA 02035 USA (508) 698-2115 • Fax (508) 698-2118 www.aemc.com Customer Support – for placing an order, obtaining price & delivery: customerservice@aemc.com Sales Department – for general sales information: sales@aemc.com Repair and Calibration Service – for information on repair & calibration, obtaining a user manual: repair@aemc.com Technical and Product Application Support – for technical and application support: techinfo@aemc.com Webmaster – for information regarding www.aemc.com: webmaster@aemc.com South America, Central America, Mexico, Caribbean, Australia & New Zealand: Chauvin Arnoux ® , Inc. d.b.a. AEMC® Instruments

15 Faraday Drive

Dover, NH 03820 USA (978) 526-7667 • Fax (978) 526-7605 export@aemc.com www.aemc.com All other countries: Chauvin Arnoux SCA 190, rue Championnet

75876 Paris Cedex 18, France

33 1 44 85 45 28 • Fax 33 1 46 27 73 89 info@chauvin-arnoux.com www.chauvin-arnoux.com