SMA32 MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • LOW NOISE FIGURE: 3.5 dB (TYP.)
  • HIGH THIRD ORDER IP: +32 dBm (TYP.)
  • HIGH OUTPUT LEVEL: +21 dBm (TYP.)
  • LOW VSWR: 1.8:1 (TYP.)

Description

The A32 RF amplifier is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. This single stage GaAs FET feedback amplifier design displays impressive performance characteristics over a broadband frequency range. An RF choke is used for DC power supply decoupling. Both TO-8 and Surface Mount packages are hermetically sealed, and MIL-STD-883 environmental screening is available. Product Image

Ordering Information

Storage Temperature -62ºC to +125ºC Case Temperature +125ºC DC Voltage +17 V Continuous Input Power 13 dBm Short Term Input power (1 minute max.) 50 mW Peak Power (3 µsec max.) 0.5 W “S” Series Burn-In Temperature (case) +125ºC Thermal Data: VCC = +15 VDC Parameter Rating Thermal Resistance θjc 182ºC/W Transistor Power Dissipation Pd 0.288 W Junction Temperature Rise Above Case Tjc +52ºC * Over temperature performance limits for part number CA32, guaranteed from 0oC to +50oC only.

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Cascadable Amplifier 100 to 2000 MHz Rev. V4 A32 / SMA32 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Outline Drawing: TO-8 * ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. Typical Performance Curves at +25°C Outline Drawing: Surface Mount * Outline Drawing: SMA Connectorized * WEIGHT: 1 gram (0.04 oz.) max WEIGHT: 1 gram (0.04 oz.) max WEIGHT: 19 grams (0.67 oz.) max