CA741 INTERSIL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

Features

Applications

  • Comparator
  • Multivibrator
  • DC Amplifier
  • Summing Amplifier
  • Integrator or Differentiator
  • Narrow Band or Band Pass Filter Pinouts

Ordering Information

TEMP. RANGE (oC) PACKAGE PKG. NO. CA0741E -55 to 125 8 Ld PDIP E8.3 CA0741CE 0 to 70 8 Ld PDIP E8.3 CA1458E 0 to 70 8 Ld PDIP E8.3 CA1558E -55 to 125 8 Ld PDIP E8.3 CA0741T -55 to 125 8 Pin Metal Can T8.C CA0741CT 0 to 70 8 Pin Metal Can T8.C CA1558T -55 to 125 8 Pin Metal Can T8.C LM741N -55 to 125 8 Ld PDIP E8.3 LM741CN 0 to 70 8 Ld PDIP E8.3 LM1458N 0 to 70 8 Ld PDIP E8.3 CA741, CA741C (CAN) TOP VIEW CA1558 (METAL CAN) TOP VIEW CA741, CA741C, LM741, LM741C (PDIP) TOP VIEW CA1458, CA1558, LM1458 (PDIP) TOP VIEW NC OUTINV. OFFSET NON-INV. OFFSET NULLINPUT INPUT NULL INV. INPUTINV. INPUT OUTPUT NON-INV. OUTPUT NON-INV. (B) (B) INPUT (B)INPUT (A) (A) (A) AB +- + OFFSET NULL INV. INPUT NON-INV. INPUT NC OUTPUT OFFSET NULL OUTPUT (A) INV. INPUT (A) NON-INV. INPUT (A) OUTPUT (B) INV. INPUT (B) NON-INV. INPUT (B) A B Data Sheet September 1998 File Number 531.4 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143| Copyright © Intersil Corporation 1999

Absolute Maximum Ratings Thermal Information Supply Voltage SUPPL Y Operating Conditions Temperature Range CA741C, CA1458, LM741C, LM1458 (Note 2) . . . . 0oC to 70oC Thermal Resistance (Typical, Note 3)θJA (oC/W) θJC (oC/W) oC CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTES: 1. Values apply for each section of the dual amplifiers. 2. All types in any package style can be operated over the temperature range of -55oC to 125oC, although the published limits for certain electrical specification apply only over the temperature range of 0oC to 70oC. 3. θJA is measured with the component mounted on an evaluation PC board in free air. Electrical SpecificationsTypical Values Intended Only for Design Guidance, VSUPPL Y =±15V PARAMETER SYMBOL TEST CONDITIONS TYPICAL VALUE (ALL TYPES) UNITS Input Capacitance C I 1.4 pF Offset Voltage Adjustment Range ±15 mV Output Resistance R O 75 Ω Output Short Circuit Current 25 mA Transient Response Unity Gain, V I = 20mV, RL = 2kΩ, C L ≤ 100pFRise Time t r 0.3 µs Overshoot O.S. 5.0 % Slew Rate (Closed Loop) SR R L ≥ 2kΩ 0.5 V/ µs Gain Bandwidth Product GBWP R L = 12kΩ 0.9 MHz Electrical SpecificationsFor Equipment Design, VSUPPL Y =±15V PARAMETER TEST CONDITIONS TEMP (oC) (NOTE 4) CA741, CA1558, LM741 (NOTE 4) CA741C, CA1458, LM741C, LM1458 UNITSMIN TYP MAX MIN TYP MAX Input Offset Voltage R S ≤ 10kΩ 25 - 1 5 - 2 6 mV Full - 1 6 - - 7.5 mV Input Common Mode Voltage Range 25 - - - ±12 ±13 - V Full ±12 ±1 3 ---- V Common Mode Rejection Ratio R S ≤ 10kΩ 25 - - - 70 90 - dB Full 70 90 - - - - dB Power Supply Rejection Ratio R S ≤ 10kΩ 2 5 ---- 3 0 1 5 0 µV/V Full - 30 150 - - - µV/V Input Resistance 25 0.3 2 - 0.3 2 - M Ω CA741, CA741C, CA1458, CA1558, LM741, LM741C, LM1458

FIGURE 5. TRANSIENT RESPONSE FOR CA741C AND CA741

All Intersil semiconductor products are manufactured, assembled and tested underISO9000 quality systems certification. Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time with- out notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web sitewww.intersil.com Sales Office Headquarters NORTH AMERICA Intersil Corporation P. O. Box 883, Mail Stop 53-204 Melbourne, FL 32902 TEL: (321) 724-7000 FAX: (321) 724-7240 EUROPE Intersil SA Mercure Center 100, Rue de la Fusee

1130 Brussels, Belgium

TEL: (32) 2.724.2111 ASIA Intersil (Taiwan) Ltd. 7F-6, No. 101 Fu Hsing North Road Taipei, Taiwan Republic of China TEL: (886) 2 2716 9310 FAX: (886) 2 2715 3029 CA741, CA741C, CA1458, CA1558, LM741, LM741C, LM1458