CA11365 LEDIL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 10

Technical content

Description

21.6 mm 13.1 mm Square PMMA PC Tape Ready FWHM Efficiency cd/lm Gerber File 0 degrees Available Ordering number CA11525_Laura-Refl-W-XPG-tape Laura Reflector XP-G Black 21.6 mm 13.1 mm Square PC PC Tape Ready FWHM Efficiency cd/lm Gerber File 0 degrees Available Ordering number 21.6 mm 13.1 mm Square PMMA PC Ready FWHM Efficiency cd/lm Gerber File 0 degrees Available Ordering number CA11353_Laura-RS-XP-G-tape Laura Lens XP-G Black 21.6 mm 13.1 mm Square PMMA PC Ready FWHM Efficiency cd/lm Gerber File 11 degrees Available August 4th 2011 13:43 Copyright Ledil Oy - Subject to change without prior notice - Page 1/4 Ledil Oy Salorankatu 10

24240 SALO

http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001

CA11643_Laura-SS-XP-G-tape Laura Lens XP-G Black 21.6 mm 13.1 mm Square PMMA PC Tape Ready FWHM Efficiency cd/lm Gerber File 11 degrees Available Ordering number 21.6 mm 13.1 mm Square PMMA PC Tape Ready FWHM Efficiency cd/lm Gerber File 16 degrees Available Ordering number CA12131_Laura-M-XP-G-tape-white Laura Lens XP-G White 21.6 mm 13.1 mm Square PMMA PC Ready FWHM Efficiency cd/lm Gerber File 30 degrees Available Ordering number CA11766_Laura-WW-XP-tape Laura Lens XP-G Black 21.6 mm 13.1 mm Square PMMA PC Tape Ready FWHM Efficiency cd/lm Gerber File 64 degrees 86 % Available August 4th 2011 13:43 Copyright Ledil Oy - Subject to change without prior notice - Page 2/4 Ledil Oy Salorankatu 10 http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001

CA11766_Laura-WW-XPG-tape Laura Lens XP-G Black 21.6 mm 13.1 mm Square PMMA PC Tape Ready FWHM Efficiency cd/lm Gerber File 64 degrees 86 % Available NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. August 4th 2011 13:43 Copyright Ledil Oy - Subject to change without prior notice - Page 3/4 Ledil Oy Salorankatu 10 http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001

  • Product series especially designed & optimized for XP-G series of LEDs. - Special care taken to make light distribution as uniform as possible. - Lens material optical grade PMMA with high UV and temperature resistance (105 degrees of Celcius / 220 degrees of Fahrenheit). Allows use of high current and temperature conditions. Please find more information about used material from below: http://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20UL94_Yellow%20Card.pdf http://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20PLEXIGLAS-Datasheet.pdf - Lens material optical grade PC with high UV and temperature resistance (120 degrees of Celcius / 248 degrees of Fahrenheit). Allows use of high current and temperature conditions. Please find more information about used materials from below: http://ledil.fi/sites/default/files/Documents/Technical/Material/PC%20Makrolon%202400_2407_2456_2458-UL .pdf - Reflector is made of aluminium coated PC (120 degrees of Celcius / 248 degrees of Fahrenheit) with protective lacquer (110 degrees of Celcius / 230 degrees of Fahrenheit). - Optic holder molded by high quality PC material (120 dergees of Celcius / 248 degrees of Fahrenheit). - Fastening to heat sink with a PU foam adhesive tape of automotive grade. Please find fastening details by clicking link: http://www.ledil.com/datasheets/DataSheet_TAPE.pdf NOTE 1: We advise customer to ensure the suitability and sufficiency of the bond in the end product. For example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the tape. NOTE 2: Assembly to the surface must be made straight, so the tape bonds constant and balanced with fastening surface. Slanted assembly might cause unbalanced bond to the surface. All surfaces where tape is applied must be clean, dry and free from grease and dirt. If cleaning of PCB surfaces is needed, please follow strictly the cleaning instructions of your LED manufacturer - this is important as cleaning shall under no circumstances damage LEDs or other electronics components on the PCB. Further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. August 4th 2011 13:43 Copyright Ledil Oy - Subject to change without prior notice - Page 4/4 Ledil Oy Salorankatu 10

http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001

25% 50% 75% 100% -60-50-40-30-20-100102030405060 Relative intensity of CA11837_Laura-M-Pin-XP-G-tape

0 % 25 % 50 % 75 % 100 % -20-15-10-505101520 Relative Intensity of CA11959_Laura-RS-Pin-XP-G-tape

Relative intensity of CA11361_Laura-D-XP-G-tape 0 % 25 % 50 % 75 % 100 % -40-30-20-10010203040

25% 50% 75% 100% -30-20-100102030 Relative intensity of CA12011_Laura-SS-Pin-XP-G-tape

25% 50% 75% 100% -60-50-40-30-20-100102030405060 Relative intensity of CA12012_Laura-O-Pin-XP-G-tape

B C A D DESIGNED BY hh DATE 21.01.2010 CHECKED BY hh DATE 25.01.2010 DRAWN BY pv DATE 11.06.2010 This drawing is our property. It can't be reproduced or communicated without our written agreement. SCALE 2:1 WEIGHT(g) SHEET 1/1 SIZE DRAWING NUMBER REV DRAWING TITLE Ledil Oy Tehdaskatu 13 FIN-24100 SALO Finland Tape Holder Lens Materials lens: PMMA holder: PC, black Tape: PU Foam Datasheet Laura-tape series assy CA11353 13.1 Front view 21.6 21.6 Bottom view Isometric view Scale: 1:1