CA0612KRX7R9BB102 BOURNS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

■ RoHS compliant* ■ Convex and concave terminals ■ 2, 4 or 8 isolated elements available ■ Resistance tolerance ±1 % and ±5 % ■ Resistance range: 10 ohms to 1 megohm CAT/CAY 16 Series - Chip Resistor Arrays *RoHS Directive 2002/95/EC Jan 27 2003 including Annex. Specifi cations are subject to change without notice. Customers should verify actual device performance in their specifi c applications Specifi cations *RoHS COMPLIANT How To Order CA Y 16 - 103 J 4 LF Chip Arrays Type  CAT16 = Concave Terminations  CAY16 = Convex Terminations Resistance Code  103 = 10 K ohms  1003 = 100 K ohms (1 % tolerance)  000 = Zero-ohm Resistance Tolerance  J = ±5 % (Use “J” for zero-ohm jumper)  F = ±1 % (4 resistor pkg. and CAT16-F8) Resistors  2 = 2 Isolated Resistors  4 = 4 Isolated Resistors  8 = 8 Isolated Resistors Terminations  LF = Tin-plated (RoHS compliant) Requirement Characteristics Test Method Short Time Overload ±1 % (±2 % for CAT16-F8, -J8 & CAY16-J8) Rated Voltage X 2.5, 5 seconds Soldering Heat ±1 % 260 °C ±5 °C, 10 seconds ±1 second Temperature Cycling (5) ±1 % 125 °C (30 minutes) - normal (15 minutes) -30 °C (30 minutes) - normal (15 minutes) Moisture Load Life ±2 % (±3 % for CAT16-F8, -J8 & CAY16-J8) 1000 hours Load Life ±2 % (±3 % for CAT16-F8, -J8 & CAY16-J8) 1000 hours Characteristics Characteristics CAT16/CAY16 Number of Elements 2 (J2), 4 (F4, J4), 8 (F8, J8) Power Rating Per Resistor 62 mW (31 mW for CAY16-J8) Resistance Tolerance ±1 %, ±5 % Resistance Range: E24 (J), E96 + E24 (F) 10 ohms - 1 megohm Zero-Ohm Jumper < 0.05 ohm Max. Working Voltage 50 V (25 V for CAY16-J8) Operating Temp. Range -55 °C - 125 °C Packaging Size F4, J4 .... 1206 Package Size For Standard Values Used in Capacitors, Inductors, and Resistors, click here. Schematics R1 R2 R1 R2 R3 R4 CAT16-F4, -J4 CAY16-F4, -J4 R1 R2 R3 R4 CAT16-F8, -J8 CAY16-J8 R5 R6 R7 R8 CAT16-J2 CAY16-J2 Soldering Profi le for RoHS Compliant Chip Resistors and Arrays 125 175 225 275 0 50 100 150 200 250 300 Time (seconds) Temperature (°C) 60 - 120 seconds 60 - 90 seconds 260 °C peak 190 °C 150 °C 220 °C Ramp Down 6 °C/second 255 °C Maximum of 20 seconds between +255 °C and +260 °C Ramp Up 3 °C/second maximum 10 seconds minimum <1> <1>

Specifi cations are subject to change without notice. Customers should verify actual device performance in their specifi c applications CAT/CAY 16 Series - Chip Resistor Arrays Derating Curve Rated power in percentage (%) Ambient Temperature (˚C) 0 -55 0 70 125 100 Dimensions DIMENSIONS: MM (INCHES) Model A A’ B C D E F Confi gurations A C B F D FE D FE CAT16-F4, -J4 A C B F CAT16-F8, -J8 A C B F CAT16-J2 AA' C B F CAY16-F4, -J4 AA' C B F CAY16-J8 C B F CAY16-J2

Specifi cations are subject to change without notice. Customers should verify actual device performance in their specifi c applications CAT/CAY 16 Series - Chip Resistor Arrays Land Patterns a f b p Solder resist Land Chip resistor array a f bp Solder resist Land Chip resistor array a f b Solder resist Land Chip resistor array p a f b p Solder resist Land Chip resistor array CAT16-F4, -J4, -F8, -J8 CAY16-F4, -J4, -J8 CAT16-J2 CAY16-J2 Model a b p f Packaging Dimensions 4.0 ± 0.1 (.158 ± .004) 2.0 + 0.1/-0.2 (.157 ± .004) 1.0 (.039) MAX. a cb 1.5 + 0.1 - 0 (.059 + .004 - 0) 180 (7.087) 2.0 ± 0.5 (.079 ± .020) (2.362) 21.0 ± 0.8 (.827 ± .031) 13.0 ± 0.5 (.511 ± .020) d e DIMENSIONS: MM (INCHES) Model a b c d e  5,000 pcs. per reel (J2, J4, CAY16-J8) 4,000 pcs. per reel (CAT16-F8, -J8)  Paper tape REV. 01/09

Specifi cations are subject to change without notice. Customers should verify actual device performance in their specifi c applications Chip Resistor Arrays - Application Note Component Placement a. Reduce the mechanical stress to a minimum during and after placing of the unit in order not to damage the terminals and protective coating. b. Misplacement of components may cause solder bridges. Soldering a. Refl ow soldering: Recommendation is shown in the following chart. b. Wave soldering: Recommendation according to IEC standards. c. Hand soldering: Don’t touch the protective coating of the part. Solder within 3 seconds when the temperature is over 280 ºC. 250 200 150 100 Preheating Soldering Gradual Cooling Temperature (°C) Cleaning A recommended cleaning method is shown in the following table. Solvents Cleaning Condition Dipping Ultrasonic Wave Washing 1 minute maximum Isopropyl alcohol 5 minutes maximum Power: 20 W/L Frequency: 10 to 100 kHz