C9P RALTRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
phone: (305) 593-6033 ! fax: (305) 594-3973 ! e-mail: sales@raltron.com ! WEB: http://www.raltron.com C9P: PLL LVPECL SERIES: ULTRA HF CLOCK OSCILLATOR, LVPECL, +3.3 VDC DESCRIPTION: A crystal controlled, high frequency, highly stable oscillator, adhering to Low Voltage Differential Signaling (LVPECL) Standards. The output can be Tri-stated to facilitate testing or combined multiple clocks. The device is contained in a sub-miniature, very low profile, leadless ceramic SMD package with 6 gold contact pads. This miniature oscillator is ideal for today's automated assembly environments. APPLICATIONS AND FEATURES: " Infiniband; Fiber Channel; SATA; 10GbE; Network Processors; SOHO Routing; Switches; " +3.3 VDC LVPECL " Frequency Range from 750KHz to 800 MHz " PLL multiplication (F>25MHz) " Miniature Ceramic SMD Package Available on Tape and Reel " Lead Free and ROHS Compliant $$$$ ABSOLUTE MAXIMUM RATINGS: PARAMETER SYMBOL VALUE UNIT Operating temperature range Ta -40…+85 °C Storage temperature range T(stg) -55…+90 °C Supply voltage Vcc +4.6 VDC Maximum Input Voltage Vi Vss-0.5…Vcc+0.5 VDC Maximum Output Voltage Vo Vss-0.5…Vcc+0.5 VDC $$$$ ELECTRICAL PARAMETERS: PARAMETER SYMBOL TEST CONDITIONS*1 VALUE UNIT Nominal Frequency fo 0.75~ 800.00** MHz Supply Voltage Vcc +3.3 ±5% VDC Supply Current Is 100.0 MAX mA Output Logic Type LVPECL Load Connected between each output and Vcc – 2.0 VDC 50 Ω Output Voltage Levels Voh Vol min max Vcc-1.025 Vcc-1.620 VDC VDC Duty Cycle DC Measured at 50% of Vcc 40/60 to 60/40 or 45/55 to 55/45 % Rise / Fall Time tr / tf Measured at 20/80% and 80/20% Vcc Levels 0.7 TYP 1.0 MAX *2 ns Fo=155.52MHz 2.6 TYP Integrated Phase tji RMS, Fj = 12 kHz…20 MHz 5 Fo=622.08MHz 2.5 TYP ps Fo=155.52MHz. 4 TYP Random period Jitter Rj using wavecrest analyzer 4 Fo=622.08MHz 6 TYP ps Fo=155.52MHz. 30 TYP** Jitter J Acumm. Peak to Peak Jitter Tp-p using wavecrest analyzer*4 Fo=622.08MHz 40 TYP** ps Phase Noise £(∆f) typ. @155.52MHz6 ∆f=10 Hz ∆f=100 Hz ∆f=1 KHz ∆f=10 KHz ∆f=100 KHz ∆f=1M Hz ∆f=10M Hz ∆f>20M Hz -60 -90 -120 -125 -121 -121 -140 -145 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz Overall Frequency Stability ∆f/fc Op. Temp., Aging, Load, Supply and Cal. Variations ±20, ±25, ±50, or ±100 MAX*3 ppm Enable High Option; Pin 1 Output Enabled Output Disabled En Dis High Voltage or No Connect Ground 0.7•Vcc MIN 0.3•Vcc MAX VDC VDC Enable Low Option; Pin 1 Output Disabled Output Enabled Dis En High Voltage Ground or No Connect 0.7•Vcc MIN 0.3•Vcc MAX VDC VDC
phone: (305) 593-6033 ! fax: (305) 594-3973 ! e-mail: sales@raltron.com ! WEB: http://www.raltron.com 123 456 .197 ±.008 .276 ±.008 7.0 ±0.2 5.0 ±0.2 INDICATES PIN 1. .079 MAX. 2.00 MAX. .200 .100 5.08 2.54 .150 3.81 .055 1.40 TYP. .050 1.27 .079 TYP. 2.00 TYP. .100 2.54 .071 1.80 SOLDER PATTERN 2.20 .087 *1 Test Conditions Unless Stated Otherwise: Nominal Vcc, Nominal Load, +25 ±3°C *2 Frequency Dependent *3 Not All Stabilities Available With All Temperature Ranges—Please Consult Factory For Availability *4 Measured with Wavecrest SIA-3000A 10,000, Cycles no filtering *5 Calculated from Agilent 5500 phase noise measurements *6 Measured with Agilent 5500 $$$$ PART NUMBERING SYSTEM: SERIES SYMMETRY TEMPERATURE RANGE (°C) FREQUENCY STABILITY (Overall) FREQUENCY (MHz) Enable/Disable C9P: UHF +3.3Vdc Clock with LVPECL Comp. Output A: 40/60 to 60/40% T: 45/55 to 55/45% R: 0…+50 S: 0…+70 U: -20…+70 V: -40…+85 K: ±20 ppm I: ±25 ppm H: ±50 ppm J: ±100 ppm 0.75…800.000 Enable High – standard (Omit Suffix) EL; Enable Low EXAMPLE: -155.520 Clock Oscillator, 7x5mm Package, +3.3 VDC Supply Voltage, LVPECL Output, Standard Symmetry, 0…+70 °C Operating Temperature Range, ±50 ppm Total Frequency Stability, 155.520 MHz ** ±20ppm stability may not be available at all combinations, please consult the factory for any custom requirements. $$$$ MECHANICAL PARAMETERS: OUTLINE TOLERANCE: ±0.006” / 0.15mm (Unless otherwise specified) PIN FUNCTIONS: [1] ENABLE/ DISABLE [2] NO CONNECT [3] CASE GROUND [4] OUTPUT [5] COMP. OUTPUT [6] SUPPLY VOLTAGE MARKING: C9PASH 155.52 RAL D/C *0.01µµµµF external by-pass filter is recommended as seen on solder pattern.
phone: (305) 593-6033 ! fax: (305) 594-3973 ! e-mail: sales@raltron.com ! WEB: http://www.raltron.com ! REFLOW PROFILE: ROHS COMPLIANT