C8A50Z4B ANAREN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model C8A50Z4B Rev A Prelim Rev5 5Z2050 1 of 2 Features: RoHS Compliant 8 Watts DC – 6.0 GHz Al203 Ceramic Non-Nichrome Resistive Element Low VSWR 100% Tested Small Size Surface Mount Termination
Description
The C8A50Z4B is high performance Alumina (Al 203) Surface Mount termination intended as a low cost alternative to Aluminum Nitride (AlN). The termination is well suited to all cellular frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The termination is also RoHS compliant! General Specifications Resistive Element Thick film Substrate Al2O3 Ceramic Terminal Finish Matte Tin over Nickel Barrier Operating Temperature -55 to +125C (see de rating chart) Tolerance is 0.010”, unless otherwise specified. Designed to meet or exceed applicable portions of MIL-E-5400. All dimensions in inches. Electrical Specifications Resistance Value: 50 Ohms, 2% Power: 8 Watts Frequency Range: DC – 6.0 GHz Return Loss >19 dB Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change. Outline Drawing UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES
8 Watts, 50
USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model C8A50Z4B Typical Performance: C8A50Z4B C8A50Z4B Power De-rating: Tape and Reel: *Actual performance could be limited by the solder properties of the application Mounting Footprint and Procedure: 2 of 2