LOTO-1 BRADY | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
Miniature Circuit Breaker Lockout - Pin Out Standard TDS No. LOTO- Effective Date: 10/03/2017 Description: Design Safe and effective method for locking out miniature circuit breakers Require no tools to install! Easily installs with the aid of a push button Recommended to lock with lightweight Brady Compact Safety Padlocks, and can accept up to 9/32" shackle diameter Made of a durable glass- filled nylon, available as each or in packs of 6" Material Made of Glass -filled nylon Springs made of Stainless Steel Color: Outer Housing – Red (PMS 1805C) Color: Inner Housing - Black UL rating – UL94 – HB Rating Chemical Chemical Acetone Petroleum Acetone Turpentine oil Chlorine, chlorine water Turpentine substitute (white spirit) Fuel, engine: Gasoline (normal & premium grade) Trichloroethane 1,1,1 Temperature Range Plastic Housings: - 20° to 120°C (0° to 250°F) Lubrication oil: gear oil < 120 Lubricating oil: HD engine oils, hydraulic oils, transformer oils < 120 Fuel, engine: M15 mixture (15% methanol) Water (including seawater) Chemical Resistance All approved chemicals listed are based on the manufactures specified chemical resistance chart for plastic material only. All other materials in the device are made of Stainless steel. Methanol Water (including seawater), chlorinated (<0,5 mg/l) Dimensions “A” 1.638” [41.6mm] “B” 0.950” [24.1mm] “C” 0.043” [1.1mm] Max “D” 0.495” [12.6mm] “E” 0.281” [7.1mm] Warranty Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information. Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, expressed or implied, and assumes no liability in connection with the use of this information. Circuit Breaker Cross Reference Guide
# of Poles Circuit Breaker Manufacture Breaker Type # of Poles Circuit Breaker Manufacture Breaker Type # of Poles Allen Bradley 1492-CB1F ABB S204-K ABB S203UP-K Allen Bradley 1492-CB2F ABB S201P-K ABB S204UP-K Allen Bradley 1492-CB3F ABB S202P-K ABB S201U-Z Allen Bradley 1492-CB1G ABB S203P-K ABB S202U-Z Allen Bradley 1492-CB2G ABB S222-K ABB S203U-Z Allen Bradley 1492-CB3G ABB S221 ABB S204U-Z Allen Bradley 1492-CB1H ABB S222 ABB S201UP-Z Allen Bradley 1492-CB2H ABB S223 ABB S202UP-Z Allen Bradley 1492-CB3H ABB S224 ABB S203UP-Z Allen Bradley 1492-CB1DF ABB S251 ABB S204UP-Z Allen Bradley 1492-CB1DG ABB S252 ABB F202AC Allen Bradley 1492-CB1DH ABB S253 ABB F672 Allen Bradley 1492-CB2DF ABB S261-B ABB F204AC Allen Bradley 1492-CB2DG ABB S262-B ABB F674 Allen Bradley 1492-CB2DH ABB S263-B ABB S281-Z ABB F362 ABB S264-B ABB S282-Z ABB F364 ABB S261-C ABB S283-Z ABB F374 ABB S262-C ABB S281UC-Z ABB E221 ABB S263-C ABB S282UC-Z ABB E222 ABB S264-C ABB S283UC-Z ABB E241 ABB S261-D Buschmat S46 ABB E271 ABB S262-D Clipsal 4CB 1-3 ABB E242 ABB S263-D Cutler Hammer WME 1-3 ABB E272 ABB S271-K Cutler Hammer WMF 1-3 ABB E243 ABB S272-K Cutler Hammer WMH 1-4 ABB E273 ABB S273-K Cutler Hammer WMM 1-4 ABB E244 ABB S274-K Cutler Hammer WMN 1-4 ABB E274 ABB S281-K Cutler Hammer WNS 1-4 ABB S201-B ABB S282-K E-T-A 911220G ABB S202-B ABB S283-K FAZ C16 1-4 ABB S203-B ABB S281UC-K Hager 453717 ABB S204-B ABB S282UC-K Hager MW216A ABB S201-C ABB S283UC-K Hager MW620A ABB S202-C ABB S201P-Z Legrand 01908 ABB S203-C ABB S202P-Z Merlin Gerin C32N 1-3 ABB S204-C ABB S203P-Z Merlin Gerin C45AD ABB S201-D ABB S201U-K Merlin Gerin C60a 1-4 ABB S202-D ABB S202U-K Merlin Gerin C60H 1-4 ABB S203-D ABB S203U-K Merlin Gerin C60N 1-4 ABB S201-K ABB S204U-K Proteus C16 ABB S202-K ABB S201UP-K Proteus 1-3 ABB S203-K ABB S202UP-K Wylex WRS40/2 Details: MSDS Information HAZARDS IDENTIFICATION This product is NOT DANGEROUS and contains no hazardous ingredients FIRST AID MEASURES/ HEALTH INFORMATION PROTECTION E ye Contact: Not applicable, product is inert Ingestion Not applicable, first aid is not normally required. Inhalation Not applicable Skin Contact: Not applicable, product is inert, except if product is melted use gloves For hot melted product, immerse in or flush affected area with water to dissipate heat, then obtain medical attention. E xposure Limits None Threshold Limits None Personal Protection: None (ambie nt conditions) NPCA-HMIS Rating: Health: Flammability: 1; Reactivity: 0 NFPA-704 Rating: Health Flammability 1; Reactivity: 0 FIRE-FIGHTING MEASURES
- Be cautious of hot melted Nylon Use water spray to cool fire, exposed surfaces, and to protect personnel Isolate product from fire Respiratory and eye protection is required for fire fighting personnel Extinguish fire with water spray Decomposition products under fire conditions: Oxygen-lean conditions may cause monoxide and irritating smoke
ACCIDENTAL RELEASE MEASURES Land Recover material and place in suitable container for reuse or for disposal in conformance with local regulations Water Recover material and place in suitable container for reuse or for disposal in conformance with local regulations. HANDLING AND STORAG E
5.1 Handling
5.2 Storage
Storage pressure: Atmospheric Storage temperature: Ambient, no direct sunlight EXPOSURE CONTRO L S PERSONAL PROTECTION
6.1 Exposure
6.2 Exposure Contro l s None
6.2.1 Occupational
E xposure Controls
6.2.1.1 Respiratory
6.2.1.2 Hand Protection: Not applicable
6.2.1.3 Eye Protection: Not applicable
6.2.1.4 Skin Protection: Not applicable
6.2.2 Environmental Exposure Controls: No data available
I CA L PROPERTIES General Information Other Information S TABILIT Y AND REACTIVITY 8.1 Cond itions to Avoid Higher Temperatures and direct sunlight (chemical resistance is excellent) Highly stable, but tempe ratures over 480 F may cause degradation
8.2 Materials to Avoid
8.3 Hazardou s Decomposition Products Under fire and oxygen-lean conditions may cause monoxide and irritating smoke ECOLOGICAL INFORMATION
9.1 Ecotoxicity
9.2 Mobility
9.3 Persistence and Degradability No data available
9.4 Bioaccumulative Potential
9.5 Other Adverse Effects
- DISPOSAL CONSIDERATIONS None of the materials in this product are Recyclable, dispose of all materials in accordance with an applicable federal, state, and local law. 11. TRAN SPOR T INFORMATION No data available 12. REGULATORY INFORMATION This product has been tested and validated to the Regulatory Requirement s listed below. OSHA CFR 1910 C)( ANSI standard Z244 13. OTHER INFORMATION No data available Shelf Life: Shelf life is two years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80° F (27° C) and 60% RH. It remains the responsibility of the user to assess the risk of using this product. We encourage customers to develop testing protocols that will qualify a product's fitness for use in their actual application. Trademarks:
Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information. Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information. WARRANTY Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under no circumstances will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products. Copyright 2019 Brady Worldwide, Inc. | All Rights Reserved Material may not be reproduced or distributed in any form without written permission. Brady North America | 6555 West Good Hope Road | Milwaukee, Wisconsin 53223 | USA | Tel: 414- 358- 6600 | Fax: 414- 228- 5770