BC546 PHILIPS

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

Product specification Supersedes data of 1999 Apr 15

2004 Nov 25

BC546; BC547 NPN general purpose transistors book, halfpage M3D186

2004 Nov 25 2

Philips Semiconductors Product specification NPN general purpose transistors BC546; BC547

FEATURES

  • Low current (max. 100 mA)
  • Low voltage (max. 65 V).

APPLICATIONS

  • General purpose switching and amplification.

DESCRIPTION

NPN transistor in a TO-92; SOT54 plastic package. PNP complements: BC556 and BC557. PINNING PIN DESCRIPTION 1 emitter 2 base 3 collectorFig.1 Simplified outline (TO-92; SOT54) and symbol. handbook, halfpage1 MAM182

ORDERING INFORMATION

BC546A SC-43A plastic single-ended leaded (through hole) package; 3 leads SOT54 BC546B BC547 BC547B BC547C

2004 Nov 25 3

Philips Semiconductors Product specification NPN general purpose transistors BC546; BC547 LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). Note 1. Transistor mounted on an FR4 printed-circuit board. THERMAL CHARACTERISTICS Note 1. Transistor mounted on an FR4 printed-circuit board. SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VCBO collector-base voltage open emitter BC546A; BC546B − 80 V BC547 − 50 V VCEO collector-emitter voltage open base BC546A; BC546B − 65 V BC547; BC547B; BC547C − 45 V VEBO emitter-base voltage open collector BC546A; BC546B − 6V BC547; BC547B; BC547C − 6V IC collector current (DC) − 100 mA ICM peak collector current − 200 mA IBM peak base current − 200 mA Ptot total power dissipation T amb ≤ 25 °C; note 1 − 500 mW Tstg storage temperature −65 +150 °C Tj junction temperature − 150 °C Tamb ambient temperature −65 +150 °C SYMBOL PARAMETER CONDITIONS VALUE UNIT R th(j-a) thermal resistance from junction to ambient note 1 250 K/W

2004 Nov 25 4

Philips Semiconductors Product specification NPN general purpose transistors BC546; BC547 CHARACTERISTICS Tamb =2 5°C unless otherwise specified. Notes 1. V BEsat decreases by about 1.7 mV/K with increasing temperature. 2. V BE decreases by about 2 mV/K with increasing temperature. SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT ICBO collector-base cut-off current VCB = 30 V; IE =0 A −− 15 nA VCB = 30 V; IE = 0 A; Tj= 150°C −− 5 µA IEBO emitter-base cut-off current VEB =5V ; IC =0 A −− 100 nA hFE DC current gain V CE =5V ; IC =1 0µA; see Figs 2, 3 and 4BC546A − 90 − BC546B; BC547B − 150 − BC547C − 270 − DC current gain V CE =5V ; IC = 2 mA; see Figs 2, 3 and 4BC546A 110 180 220 BC546B; BC547B 200 290 450 BC547C 420 520 800 BC547 110 − 800 V CEsat collector-emitter saturation voltage IC = 10 mA; IB = 0.5 mA − 90 250 mV IC = 100 mA; IB =5m A − 200 600 mV VBEsat base-emitter saturation voltage IC = 10 mA; IB = 0.5 mA; note 1 − 700 − mV IC = 100 mA; IB = 5 mA; note 1 − 900 − mV VBE base-emitter voltage V CE =5V ; IC = 2 mA; note 2 580 660 700 mV VCE =5V ; IC =1 0m A −− 770 mV C c collector capacitance V CB = 10 V; IE =ie = 0 A; f = 1 MHz− 1.5 − pF C e emitter capacitance V EB = 0.5 V; IC =ic = 0 A; f = 1 MHz − 11 − pF fT transition frequency V CE =5V ; IC = 10mA; f = 100 MHz 100 −− MHz F noise figure V CE =5V ;IC = 200µA; RS =2k Ω ; f = 1 kHz; B = 200 Hz − 21 0 d B

2004 Nov 25 5

Philips Semiconductors Product specification NPN general purpose transistors BC546; BC547 Fig.2 DC current gain; typical values. handbook, full pagewidth 250 100 150 200 MBH723 10−2 10−1 hFE

1 IC (mA)10 10 3102

VCE = 5 V BC546A. Fig.3 DC current gain; typical values. handbook, full pagewidth 300 100 200 MBH724 10−2 10−1 hFE VCE = 5 V BC546B; BC547B.

2004 Nov 25 6

Philips Semiconductors Product specification NPN general purpose transistors BC546; BC547 Fig.4 DC current gain; typical values. handbook, full pagewidth 600 200 400 MBH725 10−2 10−1 hFE VCE = 5 V BC547C.

2004 Nov 25 7

Philips Semiconductors Product specification NPN general purpose transistors BC546; BC547 PACKAGE OUTLINE UNIT A REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 5.2 5.0 b 0.48 0.40 c 0.45 0.38 D 4.8 4.4 d 1.7 1.4 E 4.2 3.6 L 14.5 12.7 e 2.54 1.27 L1(1) max. 2.5 0.66 0.55 DIMENSIONS (mm are the original dimensions) Note 1. Terminal dimensions within this zone are uncontrolled to allow for flow of plastic and terminal irregularities. SOT54 TO-92 SC-43A 04-06-28 04-11-16 A L 0 2.5 5 mm scale b c D b1 L1 d E Plastic single-ended leaded (through hole) package; 3 leads SOT54 e

2004 Nov 25 8

Philips Semiconductors Product specification NPN general purpose transistors BC546; BC547 DATA SHEET STATUS Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. LEVEL DATA SHEET STATUS (1) PRODUCT STATUS (2)(3) DEFINITION I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). DEFINITIONS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.

© Koninklijke Philips Electronics N.V. 2004 SCA76 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 Printed in The Netherlands R75/04/pp9 Date of release:2004 Nov 25 Document order number: 9397 750 13568