C460EZ290-0213-2 MARKTECH | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Subject to change without notice. www.cree.com

FEATURES

  • EZBright LED RF Performance – 460 & 470 nm EZ-18™ - 18 mW min. (470 nm only) EZ-21™ - 21 mW min. – 527 nm - EZ-08™ - 8.0 mW min.
  • Lambertian Radiation
  • Conductive-Epoxy or Eutectic Die Attach
  • Low Forward Voltage - 3.2 V Typical at 20 mA

APPLICATIONS

  • LCD Backlighting – Mobile Appliances – Monitors
  • LED Video Displays
  • Audio Product Display Lighting
  • Automotive Cree® EZ290™ Gen II LEDs Data Sheet CxxxEZ290-Sxx00-2 Cree’s EZBright® LEDs are the next generation of solid-state LED emitters that combine highly efficient InGaN materials with Cree’s proprietary optical design and device technology to deliver superior value for high-intensity LEDs. The optical design maximizes light extraction efficiency and enables a Lambertian radiation pattern. Additionally, these LEDs are die attachable with conductive epoxy, solder paste or solder preforms, as well as the eutectic method. These vertically structured, low forward voltage LED chips are approximately 170 microns in height. Cree’s EZ™ chips are tested for conformity to optical and electrical specifications. These LEDs are useful in a broad range of applications, such as general illumination, automotive lighting and LCD backlighting. CxxxEZ290-Sxx00-2 Chip Diagram D ata Sheet: CPR3EJ, Rev - Top View Bottom View Side View 280 x 280 µm Cathode (-) 100-µm dia. Mesa (Junction) 226 x 226 µm Anode (+) 280 x 280 µm Thickness 170 µm

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and EZBright are registered trademarks, and EZ, EZ290, EZ-08, EZ-18 and EZ-21 are trademarks of Cree, Inc.

2 CPR3EJ Rev -

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com Maximum Ratings at TA = 25°C Notes 1&3 CxxxEZ290-Sxx00-2 DC Forward Current 50 mA Peak Forward Current (1/10 duty cycle @ 1 kHz) 100 mA LED Junction Temperature 125°C Reverse Voltage 5 V Operating Temperature Range -40°C to +100°C Storage Temperature Range -40°C to +100°C Electrostatic Discharge Threshold (HBM) Note 2 1000 V Electrostatic Discharge Classification (MIL-STD-883E) Note 2 Class 2 Typical Electrical/Optical Characteristics at TA = 25°C, If = 20 mA Note 3 Part Number Forward Voltage (Vf, V) Reverse Current [I(Vr=5V), μA] Full Width Half Max (λD, nm) C460EZ290-Sxx00-2 2.7 3.1 3.7 2 21 C470EZ290-Sxx00-2 2.7 3.1 3.7 2 22 C527EZ290-Sxx00-2 2.9 3.2 3.9 2 35 Mechanical Specifications CxxxEZ290-Sxx00-2 Description Dimension Tolerance P-N Junction Area (μm) 226 x 226 ± 25 Top Area (μm) 280 x 280 ± 25 Bottom Area (μm) 280 x 280 ± 25 Chip Thickness (μm) 170 ± 25 Au Bond Pad Diameter (μm) 100 -15, +5 Au Bond Pad Thickness (μm) 3.0 ± 1.0 Back Contact Metal Area (μm) 280 x 280 ± 25 Back Contact Metal Thickness (μm) Note 4 3.0 ± 0.3 Notes: 1. Maximum ratings are package dependent. The above ratings were determined using a T-1 3/4 package (with Hysol OS4000 epoxy) for characterization. Ratings for other packages may differ. The forward currents (DC and Peak) are not limited by the die but by the effect of the LED junction temperature on the package. The junction temperature limit of 125°C is a limit of the T-1 3/4 package; junction temperature should be characterized in a specific package to determine limitations. Assembly processing temperature must not exceed 325°C (<5 seconds). See Cree EZBright Applications Note for assembly process information. 2. Product resistance to electrostatic discharge (ESD) according to the HBM is measured by simulating ESD using a rapid avalanche energy test (RAET). The RAET procedures are designed to approximate the maximum ESD ratings shown. The RAET procedure is performed on each die. The ESD classification of Class 2 is based on sample testing according to MIL-STD-883E. 3. All products conform to the listed minimum and maximum specifications for electrical and optical characteristics when assembled and operated at 20 mA within the maximum ratings shown above. Efficiency decreases at higher currents. Typical values given are within the range of average values expected by manufacturer in large quantities and are provided for information only. All measurements were made using lamps in T-1 3/4 packages (with Hysol OS4000 epoxy). Optical characteristics measured in an integrating sphere using Illuminance E. 4. Specifications are subject to change without notice.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and EZBright are registered trademarks, and EZ, EZ290, EZ-08, EZ-18 and EZ-21 are trademarks of Cree, Inc.

3 CPR3EJ Rev -

Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com Standard Bins for CxxxEZ290-Sxx00-2 LED chips are sorted to the radiant flux and dominant wavelength bins shown. A sorted die sheet contains die from only one bin. Sorted die kit (CxxxEZ290-Sxxxx-2) orders may be filled with any or all bins (CxxxEZ290-xxxx-2) contained in the kit. All radiant flux and dominant wavelength values shown are specified at If = 20 mA. EZ-08 C527EZ290-S0800-2 C527EZ290-0210-2 C527EZ290-0211-2 C527EZ290-0212-2 C527EZ290-0207-2 C527EZ290-0208-2 C527EZ290-0209-2 C527EZ290-0204-2 C527EZ290-0205-2 C527EZ290-0206-2 C527EZ290-0201-2 C527EZ290-0202-2 C527EZ290-0203-2 520 nm 525 nm 530 nm 535 nm 14.0 mW 12.0 mW 10.0 mW 8.0 mW Dominant Wavelength Radiant Flux EZ-21 C460EZ290-S2100-2 C460EZ290-0213-2 C460EZ290-0214-2 C460EZ290-0215-2 C460EZ290-0216-2 C460EZ290-0209-2 C460EZ290-0210-2 C460EZ290-0211-2 C460EZ290-0212-2 C460EZ290-0205-2 C460EZ290-0206-2 C460EZ290-0207-2 C460EZ290-0208-2 27.0 mW 24.0 mW 21.0 mW Dominant Wavelength Radiant Flux 457.5 nm 460 nm 462.5 nm455 nm 465 nm EZ-18 C470EZ290-S1800-2 C470EZ290-0213-2 C470EZ290-0214-2 C470EZ290-0215-2 C470EZ290-0216-2 C470EZ290-0209-2 C470EZ290-0210-2 C470EZ290-0211-2 C470EZ290-0212-2 C470EZ290-0205-2 C470EZ290-0206-2 C470EZ290-0207-2 C470EZ290-0208-2 C470EZ290-0201-2 C470EZ290-0202-2 C470EZ290-0203-2 C470EZ290-0204-2 27.0 mW 24.0 mW 21.0 mW 18.0 mW Dominant Wavelength Radiant Flux 467.5 nm 470 nm 472.5 nm465 nm 475 nm

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and EZBright are registered trademarks, and EZ, EZ290, EZ-08, EZ-18 and EZ-21 are trademarks of Cree, Inc.

4 CPR3EJ Rev -

Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com Characteristic Curves These are representative measurements for the EZBright LED product. Actual curves will vary slightly for the various radiant flux and dominant wavelength bins. 50% 100% 150% 200% 250% 0 5 10 15 20 25 30 35 40 45 50 Relative Intensity If (mA) Relative Intensity vs. Forward Current -10 0 5 10 15 20 25 30 35 40 45 50 DW Shift (nm) If (mA) Wavelength Shift vs. Forward Current 50% 100% 150% 200% 250% 0 5 10 15 20 25 30 35 40 45 50 Relative Intensity If (mA) Relative Intensity vs. Forward Current -10 0 5 10 15 20 25 30 35 40 45 50 DW Shift (nm) If (mA) Wavelength Shift vs. Forward Current If (mA) Vf (V) Forward Current vs. Forward Voltage 20% 40% 60% 80% 100% 120% 320 420 520 620 Relative Intensity (%) Wavelength (nm) Relative Intensity vs Peak Wavelength If (mA) Vf (V) Forward Current vs. Forward Voltage 20% 40% 60% 80% 100% 120% 320 420 520 620 Relative Intensity (%) Wavelength (nm) Relative Intensity vs Peak Wavelength

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and EZBright are registered trademarks, and EZ, EZ290, EZ-08, EZ-18 and EZ-21 are trademarks of Cree, Inc.

5 CPR3EJ Rev -

Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com Radiation Pattern This is a representative radiation pattern for the EZBright LED product. Actual patterns will vary slightly for each chip. C P R 3 C Q R e v . - © 2 0 0 6 C r e e , I n c . A ll R ig h ts R e s e r v e d EZB right Technology EZB right290 LED s C xxxEZ290-Sxx00 R adiation P attern: T h is is a r e p r e s e n ta tiv e r a d ia tio n p a tte r n f o r th e E Z B r ig h t L E D p r o d u c t. A c tu a l p a tte r n s w ill v a r y s lig h tly f o r e a c h c h ip .