C5060J5003AHF ANAREN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432f8909 (800) 411f6596 +44 2392f232392 +86 512f62749282 Model C5060J5003AHF Rev A Ultra Low Profile 0805 3 dB, 90° Hybrid Coupler

Description

The C5060J5003AHF is a low cost, low p rofile subfminiature high performance 3 dB coupler in an easy to use surface mount package. The C5060J5003AHF is ideal for balanced power and low n oise amplifiers, plus signal distribution and other applications where low inser tion loss and tight amplitude and phase balance are required. The C5060J5003AHF is a vailable on tape and reel for pick and place high volume manufacturing. All of the Xinger components are constructed from c eramic filled PTFE composites which possess excellent electrical and mechanical s tability. All parts have been subjected to rigorous qualification testing and units are 100% RF tested. Detailed Electrical Specifications: Specifications subject to change without notice. Features:

  • 5000 – 6000 MHz
  • 0.7 mm Height Profile
  • Surface Mountable
  • Tape & Reel
  • RoHS Compliant
  • Halogen-Free Room ( 25C ) Parameter Min Typ Max Unit Frequency 5000 6000 MHz Port Impedance 50 Ω Return Loss 20 26 dB Isolation 22 27 dB Insertion Loss* 0.2 0.24 dB Amplitude Balance 0.6 1 dB Phase Balance 0.8 3.8 Degrees Power Handling 4 Watts Operating Temperature f55 +85 ºC *Specification based on performance of un it properly installed on microstrip printed circuit boards with 50 Ω nominal impedance. Outline Drawing Top View (Nearside) Side View Bottom View (Farside) 1.29±0.10 2x 0.15 6x 0.98 4x 0.65 6x 0.30 6x 0.22 Orientation Marker Denotes Pin Location 4x 0.37 Orientation Marker Denotes Pin Location 6 5 4 321 Configurationf1 Input GND Isolated Direct GND Coupled Pin Configurationf2 Isolated GND Input Coupled GND Direct Configurationf3 Direct GND Coupled Input GND Isolated Configurationf4 Coupled GND Direct Isolated GND Input Mechanical Outline fDimensions are in Millimeters fTolerances are NonfCumulative

www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432f8909 (800) 411f6596 +44 2392f232392 +86 512f62749282 Model C5060J5003AHF Rev A Typical Broadband Performance: 10 MHz to 8010 MHz

www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432f8909 (800) 411f6596 +44 2392f232392 +86 512f62749282 Model C5060J5003AHF Rev A Typical Performance: 4900 MHz to 6100 MHz

www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432f8909 (800) 411f6596 +44 2392f232392 +86 512f62749282 Model C5060J5003AHF Rev A Definition of Measured Specifications *100% RF test is performed per spec definition for pin configuration 1 and port 1 (input port) is connected to pin1, port 2 (isolated port) is connected to pin 3, port 3 (direct port) is connected to pin 4 and port 4 (isolated) is connected to pin 6 . Parameter Definition Mathematical Representation i, j, k, m is denoted as the port index of input, isolated, d irect and coupled port for specific pin configuration shown in the table Return Loss The impedance match of the coupler to a 50 Ω system. Return Loss is an alternate means to express VSWR. 10 20log ( ) ii S Isolation The input power divided by the sum of the power at the two output ports. 10 20log ji S Insertion Loss The input power divided by the sum of the power at the two output ports. 2 2 10 10log ( ) mi ki S S + Amplitude Balance The difference in power between the two outputs. 10 20log ( ) ki mi S S Phase Balance The difference in phase angle between the two output ports. 90 o ki mi S S ∠ − ∠ +

www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432f8909 (800) 411f6596 +44 2392f232392 +86 512f62749282 Model C5060J5003AHF Rev A Mounting Configuration: In order for Xinger surface mount components to wor k optimally, the proper impedance transmission line s must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VS WR may not meet published specifications. All of the Xinger components are constructed from o rganic PTFE based composites which possess excellen t electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green st andards and ready for Pbffree soldering processes. Pads are Gold plated with a Nickel barrier. An example of the PCB footprint used in the testing of these parts is shown below. In specific designs , the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. Mounting Footprint Dimensions are in Millimeters Plated thru holes to ground Circuit Pattern Footprint Pad (s) Solder Resist 4x Transmission Line 4x 0.30 6x 0.35 6x 0.33 6x 0.05 0.66

www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432f8909 (800) 411f6596 +44 2392f232392 +86 512f62749282 Model C5060J5003AHF Rev A Packaging and Ordering Information Parts are available in reel and are packaged per EIA 481f2. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. See Model Numbers below for further ordering information . 1.75 3.50 4.00 1.60 .81 8.00 4.00 2.00 .25 2.41

Click to View Pricing, Inventory, Delivery & Lifecycle Information: Anaren: C5060J5003AHF