C4AEOBW5400A3NJ

C4AEGBU4450A1WJ KEMET | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3046_C4AE_RADIAL • 1/5/2016 One world. One KEMET Benefits

• Self-healing
• Low losses
• High ripple current
• High capacitance density
• High contact reliability
• Suitable for high frequency applications Overview The C4AE Series is a polypropylene metallized film with rectangular plastic box type filled with resin and 2 or 4 tinned copper wires.

Applications

Typical applications include DC filtering and energy storage. Printed Circuit Board Mount Power Film Capacitors C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link Part Number System C4 AE G B U 4450 A1 W J Series Type Rated Voltage (VDC) Case Number of Leads Capacitance Code (pF) Lead Diameter (mm) Size Code Tolerance C4 = MKP capacitors AE = Radial box, dc-link application G = 450 H = 600 J = 700 O = 900 Q = 1,100 B = Plastic box with epoxy resin sealing U = 2 lead W = 4 lead Digits 2 – 4 indicate the first three digits of the capacitance value. First digit indicates the number of zeros to be added. A1 = 0.8 A3 = 1.2 See Dimension Table J = 5%

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3046_C4AE_RADIAL • 1/5/2016 Power and AC Film Capacitors Printed Circuit Board Mount Power Film Capacitors – C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link Dimensions – Millimeters L H LL d B p 0.5 B 0.5 p p 4pin 2pin p Size Code p p1 B H L LL ±0.4 ±0.4 Maximum Maximum Maximum +0/-2 W 27.5 11 20 31.5 6 X 27.5 13 25 31.5 6 Y 27.5 14 28 31.5 6 1 27.5 19 29 31.5 6 2 27.5 22 37 31.5 6 F 37.5 10.2 20 40 41.5 6 H 37.5 10.2 24 44 41.5 6 J 37.5 10.2 28 37 42.5 6 L 37.5 20.3 30 45 42 6 M 52.5 20.3 30 45 57.5 6 N 52.5 20.3 35 50 57.5 6 Qualification Reference Standards IEC 61071 Climatic Category 40/85/56 according to IEC 60068-1

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3046_C4AE_RADIAL • 1/5/2016 Power and AC Film Capacitors Printed Circuit Board Mount Power Film Capacitors – C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link General Technical Data Dielectric Polypropylene metallized film - non inductive self-healing Application DC filtering / DC-Link Maximum Operating Temperature +105°C Upper Temperature TMAX +85°C IEC 61071, Endurance Test Temperature Lower Temperature TMIN -40°C Protection "Solvent resistant plastic case UL94 V-0 Thermosetting resin sealing UL94 V-0 compliant" Installation Any position Leads Tinned copper wires Packaging Packed in cardboard trays with protection for the terminals RoHS Compliant Compliant with the restricted substance requirements of Directive 2002/95/EC

Electrical Characteristics

Capacitance tolerance ± 5% at +25°C Dissipation factor (DF) ≤ 0.0002 at 10 kHz and +25°C (±5°C) Surge voltage 1.5 * VNDC for maximum 10 times in life time at 25°C Overvoltage (IEC 61071) 1.15 * VNDC for maximum 30 minutes - once per day 1.3 * VNDC for maximum 1 minute - once per day Peak non Repetitive current 1.5 * IPKR - maximum 1000 times in life time Insulation Resistance IR x C ≥ 30.000 seconds at 100 VDC 1 minute (+25°C) Capacitance deviation in operation ±1.5% maximum on capacitance value measured at (+25°C) Permissible relative humidity Annual average ≤ 70%; 85% on 30 days/year randomly distributed throughout the year. Dewing not admissible Life Expectancy Life expectancy 100.000 hours at VNDC @ Hot-Spot temperature THS = +85°C Capacitance drop at end of life -5% (typical) Failure rate IEC 61709 300 FIT at VNDC @ Hot-Spot temperature THS = +85°C Test Method Test voltage between terminals 1.5 * VNDC for 10 seconds or 1.65 VNDC for 2 seconds, at +25°C Test voltage between terminals and case 3.2 kVac 50 Hz for 2 seconds Damp Heat IEC 60068-2-78 Change of temperature IEC 60068-2-14

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3046_C4AE_RADIAL • 1/5/2016 Power and AC Film Capacitors Printed Circuit Board Mount Power Film Capacitors – C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link 0.80 0.90 1.00 1.10 1.20 1.30 1.40 1.50 10 100 1,000 10,000 100,000 1,000,000 <55 100 105 Hot Spot Temperature [ºC] Lifetime Expectancy [h] Voltage Ratio [V/VNDC] Lifetime Curve VNDC = 600 V- and VNDC = 700 V- 0.80 0.90 1.00 1.10 1.20 1.30 1.40 1.50 10 100 1,000 10,000 100,000 1,000,000 <55 100 105 Lifetime Expectancy [h] Voltage Ratio [V/VNDC] Hot Spot Temperature [ºC] 0.80 0.90 1.00 1.10 1.20 1.30 1.40 1.50 10 100 1,000 10,000 100,000 1,000,000 <55 100 105 Hot Spot Temperature [ºC] Lifetime Expectancy [h] Voltage Ratio [V/VNDC] 100 1,000 10,000 100,000 1,000,000 FIT V/VNDC 105 100 <55 Hot Spot Temperature [ºC] Lifetime Expectancy/Failure Quota Graphs FIT @ Hot Spot Temperatures Lifetime Curve VNDC = 900 V- and VNDC = 1,100 V- Lifetime Curve VNDC = 450 V- Notes: THS = TAMB + ΔT ΔT = ESR * Irms 2 * Rth Irms should be limited to values granting ΔT ≤ 30°C

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3046_C4AE_RADIAL • 1/5/2016 Power and AC Film Capacitors Printed Circuit Board Mount Power Film Capacitors – C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link Environmental Compliance As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental effects of both our capacitors and the production of them. In Europe (RoHS Directive) and in some other geographical areas like China, legislation has been put in place to prevent the use of some hazardous materials, like Lead (Pb), in electronic equipment. All products in this catalog are produced to help our customers' obligations to guarantee their products to fulfill these legislative requirements. The only material of concern in our products has been Lead (Pb), which has been removed from all designs to fulfill the requirement of containing less than 0.1% of Lead in any homogeneous material. KEMET will closely follow any changes in legislation world wide and makes any necessary changes in its products, whenever needed. Some customer segments like Medical, Military and Automotive Electronics may still require the use of Lead in electrode coatings. To clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels for RoHS compatible capacitors. Because of customer requirements there may appear additional markings like LF = Lead Free or LFW = Lead Free Wires on the label. Materials & Environment The selection of materials used by KEMET for the production of capacitors is the result of extensive experience and constant attention to environmental protection. KEMET selects its suppliers according to ISO 9001 standards and carries out statistical analysis on the materials purchased before acceptance. All materials are, to the company's present knowledge, non-toxic and free from Cadmium, Mercury, Chrome and compounds, PCB (Polychlorine Triphenyl), Bromide and Chlorine Dioxins Bromurate Clorurate, CFC and HCFC and Asbestos. Green Products All KEMET power film products are ROHS Compliant. Insulation Resistance When the capacitor temperature increases, the insulation resistance decreases. This is due to increased electron activity. Low insulation resistance can also be the result of moisture trapped in the windings, caused by a prolonged exposure to excessive humidity.

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3046_C4AE_RADIAL • 1/5/2016 Power and AC Film Capacitors Printed Circuit Board Mount Power Film Capacitors – C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link Dissipation Factor Dissipation factor is a complex function involved with the inefficiency of the capacitor. The tgδ may change up and down with increased temperature. For more information, please refer to Performance Characteristics. Sealing Hermetically Sealed Capacitors When the temperature increases, the pressure inside the capacitor increases. If the internal pressure is high enough, it can cause a breach in the capacitor which can result in leakage, impregnation, filling fluid or moisture susceptibility. Resin Encased/Wrap & Fill Capacitors The resin seals on resin encased and wrap and fill capacitors will withstand short-term exposure to high humidity environments without degradation. Resins and plastic tapes will form a pseudo-impervious barrier to humidity and chemicals. These case materials are somewhat porous and through osmosis can cause contaminants to enter the capacitor. The second area of contaminated absorption is the lead-wire/resin interface. Since resins cannot bond 100% to tinned wires, there can be a path formed up to the lead wire into the capacitor section. Aqueous cleaning of circuit boards can aggravate this condition. Barometric Pressure The altitude at which hermetically sealed capacitors are operated controls the voltage rating of the capacitor. As the barometric pressure decreases, the susceptibility to terminal arc-over increases. Non-hermetic capacitors can be affected by internal stresses due to pressure changes. This can be in the form of capacitance changes or dielectric arc-over as well as low insulation resistance. Heat transfer can also be affected by altitude operation. Heat generated in operation cannot be dissipated properly and can result in high RI2 losses and eventual failure. Radiation Radiation capabilities of capacitors must be taken into consideration. Electrical degradation in the form of dielectric embitterment can take place causing shorts or opens.

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3046_C4AE_RADIAL • 1/5/2016 Power and AC Film Capacitors Printed Circuit Board Mount Power Film Capacitors – C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link Table 1 – Ratings & Part Number Reference Cap Value (µF) VDC Dimensions (mm) dV/dt (V/µs) Ipkr ESL ESR Irms* Rth PART NUMBER70°C@10 kHz 70°C@10 kHz (HS/Amb) B H L P P1 Apk nH mΩ Arms (°C/W) 10 450 14 28 31.5 27.5 \\ 14 145 26 7.4 7.5 33 C4AEGBU5100A1YJ 20 450 22 37 31.5 27.5 \\ 15 303 28 4.8 11.0 23 C4AEGBU5200A12J 50 450 30 45 42 37.5 20.3 10 508 30 2.5 18.0 15 C4AEGBW5500A3LJ 7 600 14 28 31.5 27.5 \\ 17 118 26 9.0 7.0 33 C4AEHBU4700A1YJ 10 600 19 29 31.5 27.5 \\ 17 169 26 6.8 8.5 29 C4AEHBU5100A11J 15 600 22 37 31.5 27.5 \\ 17 253 28 5.3 10.5 23 C4AEHBU5150A12J 40 600 30 45 42 37.5 20.3 11 458 30 2.8 18.0 15 C4AEHBW5400A3LJ 4 700 13 25 31.5 27.5 \\ 19 77 25 12.9 5.5 36 C4AEJBU4400A1XJ 5 700 14 28 31.5 27.5 \\ 19 96 26 10.7 6.0 33 C4AEJBU4500A1YJ 8 700 19 29 31.5 27.5 \\ 19 154 26 7.3 8.0 29 C4AEJBU4800A11J 30 700 30 45 42 37.5 20.3 13 389 30 3.2 16.5 15 C4AEJBW5300A3LJ 5 900 19 29 31.5 27.5 \\ 24 120 26 9.1 7.0 29 C4AEOBU4500A11J 8 900 22 37 31.5 27.5 \\ 24 193 28 6.6 9.5 23 C4AEOBU4800A12J 20 900 30 45 42 37.5 20.3 16 321 30 3.9 15.0 15 C4AEOBW5200A3LJ 1 1100 11 20 31.5 27.5 \\ 28 28 25 33.1 3.0 44 C4AEQBU4100A1WJ 5 1100 22 37 31.5 27.5 \\ 29 145 28 8.2 8.5 23 C4AEQBU4500A12J 12 1100 30 45 42 37.5 20.3 20 235 30 5.3 13.0 15 C4AEQBW5120A3LJ Cap Value (µF) VDC B H L P P1 dV/dt (V/µs) Ipkr ESL ESR Irms Rth Part Number (1) Current values that lead to a ΔT of ~ 15°C in the hot spot → THS = TAMB + ΔT = 70°C + 15°C = 85°C For Packaging quantities not listed contact KEMET

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3046_C4AE_RADIAL • 1/5/2016 Power and AC Film Capacitors Printed Circuit Board Mount Power Film Capacitors – C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link KEMET Corporation World Headquarters

2835 KEMET Way

Simpsonville, SC 29681 Mailing Address: P.O. Box 5928 Greenville, SC 29606 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Corporate Offi ces Fort Lauderdale, FL Tel: 954-766-2800 North America Northeast Wilmington, MA Tel: 978-658-1663 Southeast Lake Mary, FL Tel: 407-855-8886 Central Novi, MI Tel: 248-994-1030 Irving, TX Tel: 972-915-6041 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Europe Southern Europe Sasso Marconi, Italy Tel: 39-051-939111 Skopje, Macedonia Tel: 389-2-55-14-623 Central Europe Landsberg, Germany Tel: 49-8191-3350800 Kamen, Germany Tel: 49-2307-438110 Northern Europe Wyboston, United Kingdom Tel: 44-1480-273082 Espoo, Finland Tel: 358-9-5406-5000 Asia Northeast Asia Hong Kong Tel: 852-2305-1168 Shenzhen, China Tel: 86-755-2518-1306 Beijing, China Tel: 86-10-5877-1075 Shanghai, China Tel: 86-21-6447-0707 Seoul, South Korea Tel: 82-2-6294-0550 Taipei, Taiwan Tel: 886-2-27528585 Southeast Asia Singapore Tel: 65-6701-8033 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation.

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3046_C4AE_RADIAL • 1/5/2016 Power and AC Film Capacitors Printed Circuit Board Mount Power Film Capacitors – C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required.