C47

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

SPECIFICATION FOR APPROVAL File No.: Q/FRK 0.GS.E.C47-C06 Metallized Polypropylene Film Interference Suppression Capacitor Prnduet Name (Class Y1,440Vac) Product Type MKP67 Type Code 47 Product Code Customer Customer Code Issue Date 2012-10 ll Surge Components, Inc. 95 E. Jefryn Blvd | Deer Park, NY 11729 (631) 595-1818 li www.surgecomponents.com Page 1 of 9

id www.surgecomponents.com MKP67 Code:C47 Metallized polypropylene film interference suppression capacitor(Class Y1, 440Vac) WOutline Drawing w ' | eneanesatll | ex | An ps0 W+0.4mm, H+0.4mm, T0.4mm @ Features @ Withstanding overvoltage stressing @ Excellent active and passive flame resistant abilities @ Widely used in line-by-pass, antenna Coupling interference suprression circuit, etc. @ Safety Approvals TEC 60384-14:2005, Y1, 440Vac, 0.00047HF~0.022F, 40/110/56/3 eae Certificate No: CQC 10001044432 EN 60384-14:2005, 1, 440Vac, 0.00047F~0.022uF, 40/110/S6/B Certificate No.: E186600, CCN: FOWX2/8 IEC 60384-14:2005, Y1, 440 Vac, 0.00047j1F~0.022uF, 40/110/56/B, @ Specifications Climatic Category/Passive Flammability Category | 40/110/56/B Operating Temperature Range -40°C ~+110°C Maximum continuous AC voltage 900 Vac, 50/60Hz Capacitance Range 0.00047 pF~0. 10yF Capacitance Tolerance +10%(K), +20%(M) «om Voltage Proof Page 2 of 9

i Wwww.surgecomponents.com MKP67 Code:C47 @ Part number system The 18 digits part number is formed as follow: 12 3 4 5S 6 7 8 9 10 11 12 13 14 15 16 17 18 lel‘P?T TTT TTTIT Titi tit) Digit 1 to3 Series code (C47=MKP67 Digit4toS A.C. rated voltage $1=440V Digit 6 to 8 Rated capacitance value For example : 103=10%10° pF= 0.01pF Digit 9 Capacitance tolerance K=+ 10%, M=£20% Digit 10 Pitch 6=15.0mm 9=22.5mm B=27.5 mm Digit 11 Internal use Digit 12 to 15 Lead form and packaging code Digit 16 to 18 Internal use Table 1 Lead form and packaging code ammo-pack F=10.0mm straight cach cap, among two consecutive holes F=15.0mm P3=12.7mm,H=18.Smm (For pitch=7.5mm) P3=25.4mm;H=18.5mm (For pitch=10/15mm) se sieht lead ry Or standard length c (18mm~26mm) Heme shove lead length 4.5mm Jead length 3.5mm lead length 3.2mm Page 3 of 9

(BURGE il Www.surgecomponents.com MKP67 Code:C47 @ Dimensions(mm | ce | ate | te | ate | ate | ¢ [ratte | a70pe | 7s [| uo | so | iso | 06 | carsia7icovrrrey | [sopr_[i7s| 10 | s0_| 150 | 06 | _caTsisei.corersrr | [—eaopF —[17s|_u.0| 50 | 150 | 06 | cars marcorrree | [conor [17s _| 110 | 50 | 150 | 06 | _ca7stion-coreenres | | ooze [17s | uo | so | iso | 06 | ca7siizacorerens+ | | ooosur | 17s [| uo | so | iso | 06 | ca7siisz-coverse | [ooogur_[ 175 | 20 | 60 | 150 | 06 | _carsuiez-comernnr | [00020 | 17s| 20 | 60 | 150 | 06 | __carstamz-correrre | | ooo22ur [zs [0 | 60 | iso | 06 | carsizazcorseeses | [ons uf 17s | 120 | 60 | 150 | 06 | _carsrasz-coreeeser | [oon wr | i7s_|_s [75] 150] 06 | _cersim.cormrnr | | oomeur [ins | iss [7s | iso [a6 | carsizezcovveres [00s uF |—75 | 3s_| 75 | 150 | 06 | _carsisszcanvers | [0009 [175 | 13s_| 75 150 | 06 | _carsisea-corseenrs | [0040 uF [175 | 13s | 7s | 150 | 06 | _Carstaoa-coreneee | | ooos7ur | 7s | 40 | so | iso | 06 | carsiara-corerer+ | 00080 ur [175 | 4s | as 180 | 06 | _carsisozcarverrs | | oooscur [zs [iss [ss [iso [06 | carsisea-covereres | | oooseur [17s | 160 | 100 [iso | os | ca7si6n2-covereres | | oooszur | i7s | 190 | no | iso | og | ca7sigz2corsssres | oor [7s| 190 | no | 150_|_o8 | _carsiios.comerre | ee 0.0068 WF 16.0 10 25 | 08 C47S1682-90**#4+4+ [00g wr [26s | 170 | es | ms | oa | carsiezzsgreens | | oor | 265 | 170 | ss | 225 | os | ca7siios.sorerere+ | [oorzur [265 | tes | 100 | ms | 08 | carsnassoreenrs | [ooisur | 265 | 185] 100 | 22s | oa | _cavsuisasorerene | [ooreur 265 | 200 | 0 | 225 | os | _ca7siimssorerres | [0022 uF [265 | 220 | 20 | 25 | 08 | carsimssomre | aoor wr [320 | 280 | m0 | 275 | 08 | _carsuas.norenne | [reo | a7s_| os | crrsiee-noeecre | Cee aes ae — ee —] Note: 1. “-"=capacitance tolerance code, M=+20%,K=+10% 2. "####"=lead form and packaging mode code (refer to table 1) 3. “a” indicates no approval @ Maximum permissible voltage change per unit of time LNno) | Petsmm | P=22.6mm | P=27.5mm__| Pas 3 000 to 500 Note: 1. Rated voltage pulse slope (dV/dt). at rated voltage. 2. Ifthe working voltage(U) is lower than the rated voltage(U,),the capacitor can be worked at a higher dV/dt. In this case, the maximum allowed dV/dt is obtain by multiplying the right value with U/U. Page 4 of 9

il www .surgecomponents.com MKP67 Code:C47 M@_Test Method And Performance Perf Test Method erformance (GB/T14472, TEC 60384-1 so " _ Solder temperature: 245°C +5°C a 4.5 Solderability Good quality of tinning Immersion time: 2.0s+0.5s Tense: 0.50<d<0.80, 10N 43 . Bend: Terminal There shall be no visible damage 0.50<d<0.80, 5N The terminals shall be bent 2 times in each direction

44 There shall be no visible damage Solder temperature:260°C+5°C

Resistance to solder heat | AC/C <+5%(relative to the initial value) | Immersion time: 10st1s Solvent: Industrial isopropanol.

426 Solvent temperature:23°C45°C

Solvent resistance The marking shall be legible econ demain min£0.Smin of the marking Scrub material: absorbent cotton Reverting time: No

4.6 Rapid change There shall be no evidence of 8a=40°C, OR=+110°C — S cycles

of temperature deterioration. Duration: t=30min Amplitude 0.75mm or acceleration There shall be no evidence of 100m/s* (whichever is the smaller 4.7 Vibration immune severity), f. 10Hz to 500Hz.Three erioration. directions, 2h foreach direction, total 6h. , 4.000 times, 4.8 Bump sere eel euocevienos ot Acceleration: 400m/s?, nn Pulse duration, 6ms There shall be no visible damage AC/C <+5%(relative to the initial value) Initial measurement Ce 4.11 7 Climate ip heat, ‘4 There shall be no visible damage, legible marking Final AC/C <+5%(relative to the initial value) Increase of tg5: <0.008 (10kHz) measurement | 1 tectric strength : there shall be no permanent breakdown or flashover LR.: 2 50% of the rated value Page 5 of 9

Code:C47 Partork Test Method ance (GB/T14472, IEC 60384-14) There shall be no visible damage, legible marking cae ag

4.12 ACIC <5%(relative to the initial value) | Temperature:40°C 42°C

7 Damp heat Increase of tg: <0.008 (10kHz) Humidity: 9373 %RH steady state Dielectric strength : there shall be no — permanent breakdown or flashover Duration: 56 days LR.: > 50% of the rated value Each individual capacitor shall be subjected to 24 impulses of the same polarity (when any three successive There are three or more waveforms impulses are shown by the monitor to 4.13 which indicate that no self-heating have _a wave form indicating that no Impulse voltage breakdown have occurred when it is self-healing breakdown have taken monitored by the monitor place the impulses can be stopped), the time between impulses shall not be less than 10s, and the peak value of the voltage impulse: 8.0kV Nadie be no visible damage, legible +110°C, ACIC<#10%4(telative tothe intial value) | }-7CRVAS- 4.14 Endurance Increase of tg5: <0.008 (10kHz) [ as # d The voltage shall be subjected to Dielectric strength : There shall be no 1 000Vrms for 0.ls every one hour breakdown or flashover daving text LR. : 2 50% of the rated value sean Times: 10 000 Duration of charging: 0.5s Duration of discharging: 0.5s Charging voltage: {2Up Vdc.

4.15 AC/C <+10%(relative to the initial Charging resistance: 220/Ca(Q) or

Charging and value) the current <1.0A (whichever is the daecan he Increase of tg6: minor) harging CSIP: <0.008 (10kHz) Discharging resistance: LR.: 2 50% of the rated value V2Uk R= Ww (Q) Cax— dt Cr: Capacitance (uF) dU/dt(V/us) : 100V/us Ref.item 4.17 * ay ti p Needle flame test The flaming time of each capacitor shall me 4.17 not go beyond 10s after itis taken apart | THE caleBory of oe 7 Ratsive Fon he Dene. Capacitor Volume Exposing time flammability Drop of each capacitor caused by flame Lee oa) a ee hall not fire the tissue below. = sew i. 500<V(mm?)<1750 30s V(mm’)>1750 60s 12 4.18 This test is not applicable to Y1 capacitors Active flammability “PP apes Page 6 of 9

i www.surgecomponents.com MKP67 Code:C47 @ Quality ensuring test (before shipment): Inspection level (GB/T 2828.1, [SO 2859-1) | Dimensions “ Tangent of the loss angle 0.25% @ Marking w x conan SEO Alu Marking Introduction: ee ee ee ee Climate category / fF Braad ARTIOSOE Passive Flammability Class Rated capacitance and tolerance Page 7 of 9

il URGE gecomp: MKP67 il Wwww.surgecomponents.com Code:C47 @ = Taping specification for box-type capacitors A Outline Drawing is ad 2, B, Ti | £ By ia T i fo . if) E) U fl, a TIL of Le | Z de Bie RUB A Taping Dimensions(mm) A Packing Quantity ‘Technology index | imensions " Code Ammo-pack | tevingtye [ — | gt | rign [rie [rig [—] |™ | tymm [domestic | Expon_| Peeper | om [on [aos [ aes [ | [Poe se ae [oping pies [-P, | 7 a7] asa | asa | iO | Pak oe fe [Feedtoe pick [he | a7 | a7 | 7 | a | =o | Centerof wire | pi | 385 | 26 | 77 [52 | 207 | [60 | 1000 | 800 _| | Center of body | Pr | 63s | 63s | 127 | 127 | 213 | [35 | 1700 | 1500 | Pacroraning [= [so | 1s | woo | aso | 88 [40 [1300 [1300 | site a 8 [50 coavenat [1200 [1000 | alignment 42.0 [60 | 1000 | 800 eight of [40 750 so component from 205 [so | 600 | soo | tie sae [so | so0 [450 er Told down tape [we | emin | tomin [10min | omin | — | [ss | 350 300 width . [too | 300250 | Hole position [Wy [9.0 [790 [90 [790 [7305 | [io 30200] psn [ [oan | a> [nm | — | a [ Feed holeda_| Dy [40 | 40 | a0 | «0 _| wa | [Tape thickness | 1 | 07 | 07 | 07 | 09 | 202 | Note: * P)=15mm is also available; F can be other lead spacing: *H=16,5mm is available; Page 8 of 9

Il URGE www surgecomponents.co MKP67 id WW. Tr mponen' im. Code:C47 @ Packing box sizes(mm) 1. Out packing box for bulk 2. Inner packing box for bulk TZ ——_ — L:37545 Li | tts i a weno : weiss “ H:26545 ’ : , A 3 GP HEII843 7 L 3. Box sizes for Ammo-pack ° H 1:33043 B:4843 H:26043 x B Page 9 of 9