C450EZ1400-0217-2 MARKTECH | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Subject to change without notice. www.cree.com CxxxEZ1400-Sxx000-2 Chip Diagram
FEATURES
- EZBright LED Technology » 800 mW min. @ 1000 mA - 450 & 460 nm
- Lambertian Radiation
- Conductive Epoxy, Solder Paste or Preforms, or Flux Eutectic Attach
- Low Forward Voltage
- Dielectric Passivation across Epi Surface
APPLICATIONS
- General Illumination » Aircraft » Decorative Lighting » Task Lighting » Outdoor Illumination
- White LEDs
- Projection Displays
- Automotive
- Camera Flash Cree® EZ1400™ Gen II LEDs Data Sheet CxxxEZ1400-Sxx000-2 Cree’s EZBright™ LEDs are the next generation of solid-state LED emitters that combine highly efficient InGaN materials with Cree’s proprietary optical design and device submount technology to deliver superior value for high- intensity LEDs. The optical design maximizes light extraction efficiency and enables a Lambertian radiation pattern. Additionally, these LEDs are die-attachable with conductive epoxy, solder paste or solder preforms, as well as the flux eutectic method. These vertically structured, low forward voltage LED chips are approximately 170 microns in height. Cree’s EZ™ chips are tested for conformity to optical and electrical specifications. These LEDs are useful in a broad range of applications such as general illumination, automotive lighting, projection displays and camera flash. D ata Sheet: CPR3EK Rev. - Top View Bottom ViewDie Cross Section 1380 x 1380 μm Cathodes (-) 150 x 150 μm 170 μm Anode (+) AuSn Mesa (Junction) 1350 x 1350 μm Thickness
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks, and EZBright. EZ1400 and EZ are trademarks of Cree, Inc. 2 CPR3EK Rev. - Cree, Inc.
4600 Silicon Drive
Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com Maximum Ratings at TA = 25°C Note 1 CxxxEZ1400-Sxx000-2 DC Forward Current 1500 mA Peak Forward Current (1/10 duty cycle @ 1 kHz) 1500 mA LED Junction Temperature 145°C Reverse Voltage 5 V Operating Temperature Range -40°C to +100°C Storage Temperature Range -40°C to +125°C Typical Electrical/Optical Characteristics at TA = 25°C, If = 1000 mA Note 2 Part Number Forward Voltage (Vf, V) Reverse Current [I(Vr=5V), μA] Full Width Half Max (λD, nm) C450EZ1400-Sxx000-2 3.3 3.7 4.3 2 20 C460EZ1400-Sxx000-2 3.3 3.7 4.3 2 21 Mechanical Specifications CxxxEZ1400-Sxx000-2 Description Dimensions Tolerance P-N Junction Area (μm) 1350 x 1350 ± 35 Chip Area (μm) 1380 x 1380 ± 35 Chip Thickness (μm) 170 ± 25 Top Au Bond Pad (μm) - Qty. 2 150 x 150 ± 25 Au Bond Pad Thickness (μm) 3.0 ± 1.5 Back Contact Metal Area (μm) 1380 x 1380 ± 35 Back Contact Metal Thickness (μm) 3.0 ± 1.5 Notes: 1. Maximum ratings are package-dependent. The above ratings were determined using a 3.45 x 3.45 mm SMT package without an encapsulant for characterization. Ratings for other packages may differ. The junction temperature should be characterized in a specific package to determine limitations. Assembly processing temperature must not exceed 325°C (< 5 seconds). See Cree EZBright Applications Note for assembly-process information. 2. All products conform to the listed minimum and maximum specifications for electrical and optical characteristics when assembled and operated at 1000 mA within the maximum ratings shown above. Efficiency decreases at higher currents. Typical values given are within the range of average values expected by the manufacturer in large quantities and are provided for information only. All measurements were made using a Au-plated TO39 header without an encapsulant. Optical characteristics were measured in an integrating sphere using Illuminance E.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks, and EZBright. EZ1400 and EZ are trademarks of Cree, Inc. 3 CPR3EK Rev. - Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com Standard Bins for CxxxEZ1400-Sxx000-2 LED chips are sorted to the radiant flux and dominant wavelength bins shown. A sorted die sheet contains die from only one bin. Sorted die kit (C xxxEZ1400-Sxx000-2) orders may be filled with any or all bins (C xxxEZ1400-0xxx-2) contained in the kit. All radiant flux and dominant wavelength values shown and specified are at If = 1000 mA. Radiant flux values are measured using Au-plated TO39 headers without an encapsulant. C450EZ1400-S80000-2 C450EZ1400-0217-2 C450EZ1400-0218-2 C450EZ1400-0219-2 C450EZ1400-0220-2 C450EZ1400-0213-2 C450EZ1400-0214-2 C450EZ1400-0215-2 C450EZ1400-0216-2 C450EZ1400-0209-2 C450EZ1400-0210-2 C450EZ1400-0211-2 C450EZ1400-0212-2 C450EZ1400-0205-2 C450EZ1400-0206-2 C450EZ1400-0207-2 C450EZ1400-0208-2 1250 mW 1100 mW 950 mW 800 mW Dominant Wavelength Radiant Flux 447.5 nm 450 nm 452.5 nm445 nm 455 nm C460EZ1400-S80000-2 C460EZ1400-0217-2 C460EZ1400-0218-2 C460EZ1400-0219-2 C460EZ1400-0220-2 C460EZ1400-0213-2 C460EZ1400-0214-2 C460EZ1400-0215-2 C460EZ1400-0216-2 C460EZ1400-0209-2 C460EZ1400-0210-2 C460EZ1400-0211-2 C460EZ1400-0212-2 C460EZ1400-0205-2 C460EZ1400-0206-2 C460EZ1400-0207-2 C460EZ1400-0208-2 Dominant Wavelength Radiant Flux 457.5 nm 460 nm 462.5 nm455 nm 465 nm 1250 mW 1100 mW 950 mW 800 mW
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks, and EZBright. EZ1400 and EZ are trademarks of Cree, Inc. 4 CPR3EK Rev. - Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com Characteristic Curves, TA = 25°C This is a representative measurement for the EZ1400 LED product. Actual curves will vary slightly for the various radiant flux and dominant wavelength bins. 25% 50% 75% 100% 125% 150% 0 250 500 750 1000 1250 1500 % Relative Intensity If (mA) Relative Intensity vs. Forward Current -0.5 0.5 1.5 2.5 0 250 500 750 1000 1250 1500 DW Shift (nm) If (mA) Wavelength Shift vs. Forward Current 25% 50% 75% 100% 125% 150% 0 250 500 750 1000 1250 1500 % Relative Intensity If (mA) Relative Intensity vs. Forward Current -0.5 0.5 1.5 2.5 0 250 500 750 1000 1250 1500 DW Shift (nm) If (mA) Wavelength Shift vs. Forward Current 25 50 75 100 125 150 DW Shift (nm) Junction Temperature (°C) Dominant Wavelength Shift vs. Junction Temperature 0.60 0.65 0.70 0.75 0.80 0.85 0.90 0.95 1.00 25 50 75 100 125 150 Relative Light Intensity (%) Junction Temperature (°C) Relative Light Intensity vs. Junction Temperature 25 50 75 100 125 150 DW Shift (nm) Junction Temperature (°C) Dominant Wavelength Shift vs. Junction Temperature 0.60 0.65 0.70 0.75 0.80 0.85 0.90 0.95 1.00 25 50 75 100 125 150 Relative Light Intensity (%) Junction Temperature (°C) Relative Light Intensity vs. Junction Temperature -0.350 -0.300 -0.250 -0.200 -0.150 -0.100 -0.050 0.000 25 50 75 100 125 150 Voltage Shift (V) Junction Temperature (°C) Voltage Shift vs. Junction Temperature 250 500 750 1000 1250 1500 0 1 2 3 4 5 If (mA) Vf (V) Forward Current vs. Forward Voltage
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks, and EZBright. EZ1400 and EZ are trademarks of Cree, Inc. 5 CPR3EK Rev. - Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com Radiation Pattern This is a representative radiation pattern for the EZBright Power Chip LED product. Actual patterns will vary slightly for each chip.