C43

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

RoHS fe} Compliant ASI SPECIFICATION FOR APPROVAL File No.: Q/FRK 0.GS.E.C43-C09 Product Name Metallized Polypropylene Film Interference Suppression Capacitor Product Type MKP63 Type Code C43 Product Code Customer Customer Code Issue Date 2012-10 HO RGE ra Surge Components, Inc. 95 E. Jefryn Blvd Deer Park, NY 11729 www.surgecomponents.com Page | of 10

Lo www.surgecomponents.com Code:C43 Metallized polypropylene film interference suppression capacitor (Class Y2, 300Vac) Outline Drawing w T TPS 300.2 tux 40/1086 @E&O cAlss | 430.05 c P04 W20.4mm, H=0.4mm, T+0.4mm_ @ Features @ Withstanding overvoltage stressing @ Excellent active and passive flame resistant abilities @ Widely used in across-the-line, line-by-pass, antenna Coupling interference suppression circuit, etc. @ Safety Approvals cec TEC 60384-14:2005, Y2, 300Vac, 0.001 HF~1.0uF , 40/110/56/B Certificate No.: CQC04001009958 7 EN 60384-14:2005, ¥2, 300 Vac, 0.0014F~1.0uF, 40/110/56/B. . KS ENEC-SEMKO Certificate No.: SE/0366-2B, Test Report No.: 916516 UL/CUL UL60384-14:2009, CSA E60384-14:09, Y2, 300Vac, 0.001 1F~1.0uF, 40/110/56/B. Certificate No.: E186600, CN: FOWX2/8 TEC 60384-14:2005, Y2, 300 Vac, 0.001nF~1.0uF, 40/110/56/B . om ener @ Specifications Climatic Category / , Passive Flammability Catego 40/110/56/B Operating Temperature Range -40°C ~+110°C Rated Voltage (Uz) 300Vac, 50/60Hz Maximum continuous AC voltage 480Vac, 50/60Hz Maximum continuous DC voltage 1 250 Vde Capacitance Range 0,0010F~1.0uF Capacitance Tolerance +10%(K), +20%(M) aS 4 000Vde(2s) Cr<0.33 HF Voltage Proof Between Terminals: 2 000Vac(2s) or 3 700Vde(2s) Cy0.33 Between Termianls To Case: _| 2 460Vac(Imin) . R215000MQ, — Cx<0.33HF 7 . Insulation Resistance RC>5 000s, Ci20.330F (20°C, 100V ,lmin) <30x107(1kHz,20°C) <A0x10"(10kHz,20°C) Page 2 of 10

ll | | HL www.surgecomponents.com MKP63 Code:C43 @ Part number system The 18 digits part number is formed as follow: 12 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 lelsIs; TT TTT TTT Ptr itt) Digit 1 to3 Series code C43=MKP63 Digit 4 to 5 ACC. rated voltage Q1=300V Digit 6 to 8 Rated capacitance value For example : 103=10*10° pF= 0.01 uF Digit 9 Capacitance tolerance K=+10%, M=+20% Digit 10 Pitch 3=7.5mm 4=10mm 6=15mm 9=22.5mm B=27.5mm_ F=37.5mm Digit 11 Internal use Digit 12 to 15 Lead form and packaging code Digit 16to 18 Internal use Table 1 Lead form and packaging code A | ammo-pack | 3 F=7.5mm straight 1 | each cap. among two consecutive holes 4 F=10.0mm P3=12.7mm,H=18.5mm (For pitch=7.5mm) 6 F=15.0mm 5 | P3=25.4mm;H=18.5mm (For pitch=10/15mm) straight lead Or standard length SC" in the | 00) | Standard Tead length stand ene G e above (18mm~26mm) figure above | 45 | jead length 4.5mm 33 lead length 3.5mm. 32 | lead length 3.2mm Page 3 of 10

il www.surgecomponents.com MKP63 Code:C43 @ Dimensions(mm) PS [Slee] | rome |S [Safes] on | | 0.0033 [105 [110 | 50 [75 [06 | cnomsor | [033 [265 [245 [155 [225 [08 | Cag isanosrre | | 0.0047 [105 [120 | 60 [75 [oe | caqumar | [039m [265 | 29.5 [145 [22.5 [0.8 T CaQisoamosere | | ose [175 [160 | 100 | 150 [os | cagisacsmens | [7 056 [420 [280 [14.0 [375 [10 | cagise-ra | Note: 1. “-"=capacitance tolerance code, M=420%,K=+10% 2. “##*#"=Jead form and packaging mode code (refer to table 1) Page 4 of 10

il HR www.surgecomponents.com MKP63 Code:C43 @ Maximum permissible voltage change per unit of time Rated Max dV/dt(V/us) at 425Vde Voltage soo [soo [so | coo | so | oo | wo_| Note: 1. Rated voltage pulse slope (dV/dt)g at rated voltage. 2. Ifthe working voltage(U) is lower than the rated voltage(U),the capacitor can be worked at a higher dV/dt. In this case, the maximum allowed dV/dt is obtain by multiplying the right value with Up/U. @ Impedance Vs. Frequency TYPICAL GRAPHS Z=f(f) Typical values c43 za] 100 10 ey ; A t D 7 t 0.0022uF °: on j L foci OOF died 0.01 o4 1 F [hHtz] 10 100 @ Quality ensuring test (before shipment): Inspection item (each batch) Inspection level (GB/T 2828.1, ISO2859-1) 1.5% Tangent of the loss angle II 0.25% Dielectric strength Page 5 of 10

Lf www.surgecomponents.com Code:C43 Test Method And Performance Performance Test Method (GB/T14472, IEC 60384-14) oe . oe Solder temperature: 245°C +5°C + | 4.5 Solderability Good quality of tinning Immersion time: 2.0s#0.5s Tense: 0.50<d<0.80, 10N 0.80<d<1.25, 20N 43 as Bend: 0.50<d<0.80, 5N 2 TTerminallstren th There shall be no visible damage 0.80<d<1.25, 10N The terminals shall be bent 2 times in each direction 3 44 There shall be no visible damage Solder temperature:260°C+5°C Resistance to solder heat | AC/C <+5%(relative to the initial value) | Immersion time: 10st1s Solvent: Industrial isopropanol.

4.20 Solvent temperature:23°C+5°C

4 Solvent resistance The marking shall be legible Bean time: raint0.Smin Gfiioam sig Scrub material: absorbent cotton Reverting time: No

4.6 Rapid change There shall be no evidence of Oa=-40°C, OB =+110°C 5 cycles

of temperature deterioration. Duration: t=30min Amplitude 0.75mm or acceleration . 100m/s (whichever is the smaller 4.7 Vibration rere shail be no evidence of severity), f 10Hz to 500Hz. Three 5 eterroration. directions, 2h foreach direction, total 6h. 5 4 000 times,

4.8 Bump rere shail be no evidence of Acceleration: 400m/s”,

jae Pulse duration, 6ms Final measurement There shall be no visible damage AC/C <+5%(relative to the initial value) Initial measurement Damp — heat, Cyclic fF sts—i—iCY Test Db, Severity: b, the first cycle 411 Damp heat, .

6 Climate Reyeucotien Test Db, Severity b, the other cycles,

There shall be no visible damage, legible marking Final AC/C <+5%(relative to the initial value) measurement Increase of tg5: <0.008 (10kHz) Dielectric strength : there shall be no permanent breakdown or flashover LR.: = 50% of the rated value Page 6 of 10

a AE ee MKP63 Code:C43 Test Method iam eae (GB/T14472, IEC 60384-14) There shall be no visible damage, legible marking 5 ,

4.12 ACIC <#5%(relative to the initial value) | Temperature:40°C 42°C

7 Damp heat Increase of tg3: <0.008 (10kHz) Humidity: 93*3 %RH steady state Dielectric strength : there shall be no Duration: 56 days permanent breakdown or flashover LR.: = 50% of the rated value Each individual capacitor shall be subjected to 24 impulses of the same polarity (when any three successive There are three or more waveforms impulses are shown by the monitor to 4.13 which indicate that no self-heating have a wave form indicating that no Impulse voltage breakdown have occurred when it is self-healing breakdown have taken monitored by the monitor place the impulses can be stopped), the time between impulses shall not be less than 10s, and the peak value of the voltage impulse: 5.0kV There shall be no visible damage, legible +110" marking ; WG, AC/Cs+10%(relative to the initial value) 1 ‘000h ac. 4.14 Endurance Increase of tg5: <0.008 (10kHz) . i ‘ . The voltage shall be subjected to Dielectric strength : There shall be no 1 000Vrms for 0.1s every one hour breakdown or flashover during test LR. : > 50% of the rated value 8 test. Times: 10 000 Duration of charging: 0.5s Duration of discharging: 0.5s Charging voltage: 2Up Vd.c.

415 ACIC <+10%(relative to the initial Charging resistance: 220/Ca(Q) or the

Ch: d value) current <1.0A (whichever is the 10 ate ing ani Increase of tg: minor) =_—— CrS1 MF: <0.008 (10kHz) Discharging resistance: LR.: > 50% of the rated value p= 22U_@ dU Crx— dt Cr: Capacitance (11F) dU/dt(V/us) : 100V/ps Ref.item 4.17 . Needle flame test The flaming time of each capacitor shall cp 4.17 not go beyond 10s after it is taken apart | The category of flammability: B . Expose time: | time ul Passive from the flame. . ae a. - Capacitor Volume Exposing time flammability Drop of each capacitor caused by flame 250<V(mm')<500 20 shall not fire the tissue below. ~ (mm )s5 s V(mm’)>1750 60s Page 7 of 10

L www.surgecomponents.com Code:C43 N Per Test Method ° ervormance (GB/T14472, TEC 60384-14) The specimens shall be individually wrapped in at least 1,but not more than 2,complete layers of cheesecloth, the cheesecloth shall be untreated pure cotton. Each sample shall be subjected to 20 discharged, the interval between D 4.18 The cheese cloth around the capacitor | successive discharges shall be 5's. Active flammability shall not burn with a flame. Uj=5.0kV 704 Throughout the test, the Urp+5% shall be applied across the capacitor under test and shall be maintained for 120;"° s after the last discharge, unless a blown fuse cause an open circuit. @ Marking w as PCS 300. ¥2 104K 40/110/56/8 @ &O clus Marking Introduction: a Climate category / a V5 . Se Page 8 of 10

il —— MKP63 Code:C43 @ = Taping specification for box-type capacitors A Outline Drawing PF: P P. Pa. = ae tT. 2B, Phe By AS: io f . FI ti ttl Ef ole 11 fs TLILIL_5 Tella Uta t at WH) ad ee ee a alee ee OO aa ra tt —55 yy To ) bd fe aga Aoi ny, ae Bi i De A Taping Dimensions(mm) A Packing Quantity Technology index] Goae " Ammo-pack (mam) thinkness (pes/box) tepingype | — | riet | Fier | rie | Fez | — | T¢mm) Part gure Amme- A201 | A301 | A40s | AGOS || 2500 2.000 Taping ih ‘ol Feed hole pitch 1000 Center of body 1500 Component 1200 1.000 | Simmer | 2° | 0 | 9 [0 | eo | a0 | [0 [000 | ano Height of 10.0) caniertpe win] w | iso | iso | iso | iso | “39 Hold down tape - 156 man | We | nin | toni | oni | vonin | — | [100 | 00 | 350] Tioie positon |W, | 90 | 90 | 90 | 90 | 205 | [0 [250 [200 | sition Feed hole dia [Tape thickness | t [07 07 J 07 fT 09 Tf +0.2 | Note: * Po=15mm is also available; F can be other lead spacing; *H=16.Smm is available; Page 9 of 10