C41E2 MURATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 20

Technical content

Datasheet sections

Manufacturing Co., Ltd. Cat.No.C41E-2 High Voltage Ceramic Capacitors DC10-40kV HIGH VOLTAGE CERAMIC CAPACITORS Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. !Note C41E2.pdf 03.4.16

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

  • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. (Global Part Number) High Voltage Ceramic Capacitors (over 10kV) tCapacitance Expressed by three figures. The unit is pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two numbers. If there is a decimal point, it is expressed by the capital letter "R ". In this case, all figures are significant digits. First three digits of part number (qProduct ID and wSeries Category) express "Series Name". t 101 y M q DH u r e w R i B qProduct ID Code Temp. Char. Temp. Range B Z5V ZM N4700 T10% W22%, Y82% Y4700T1000ppm/D Y25 to W85D W10 to W85D W20 to W85D Cap. Change or Temp. Coeff. eTemperature Characteristics wSeries Category rRated Voltage Rated VoltageCode DC10kV DC12kV DC15kV DC20kV DC30kV DC40kV yCapacitance Tolerance uLead Type (DHR Series) iPackaging ContentsCode R S Radial Type Mold Type Capacitance ToleranceCode K M Z T10% T20% W80%, Y20% Lead TypeCode Straight Long Lead Spacing 9.5mm 12.7mm Lead Diameter ø0.65mm ø0.8mm Product ID DH High Voltage Ceramic Capacitors (over 10kV) PackagingCode B Bulk uBody Diameter and Terminal Type (DHS Series) Body DiameterCode CX DX HX LX NX RX TX 20mm 24mm 30mm 38mm 43mm 52mm 60mm 20mm 24mm 30mm 38mm 43mm 52mm 60mm Terminal Type ISO M4, P0.7 Tapped Holes (Metric Screw Thread) No.8-32, NC-2B Tapped Holes (Inch Screw Thread) o Part Numbering Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. !Note C41E2.pdf 03.4.16

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

  • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. High Voltage Ceramic Capacitors DC10-40kV Radial Lead Type DHR Series (DC10-15kV) n Features 1. Small size 2. Excellent heat-proof, humidity-proof and high- dielectric strength voltage. 3. Coated with flame-retardant epoxy resin. n Applications 1. Color TV doublers and triplers 2. High voltage DC power supplies (PPCs, X-ray apparatus, air cleaner, lasers, etc.) 3. Tuning capacitor in focus circuit for display (in mm) T max. φd–0.05 F–2 D max. 4.0 max. D+1.0 max. 35.0 min. n Marking Temp. Char. Nominal body dia. ø8mm ø9mm and 10mm ø11mm to 14mm ø15mm to 18mm Nominal Capacitance Capacitance Tolerance Rated Voltage Manufacturer's Identification Manufactured Date Temperature Characteristics Nominal body dia. ø8mm Nominal body dia. ø9 and 10mm Nominal body dia. ø11 to 14mm Nominal body dia. ø15mm min. Omitted Marked with • (dot) Marked with code. Marked with Z. Under 100pF : Actual value, 100pF and over : Marked with 3 figures. Marked with code, omitted for nominal body diameter ø8mm and under. Marked with code. Marked with , omitted for nominal body diameter ø14mm and under. Abbreviation, omitted for nominal body diameter ø14mm and under. (Ex.) 0 0 5 0 : Last numeral in year : Fix No. : Number in the month Omitted Marked with code. ZM 102KZ 10K 0050 221K 10K• ZM 471K 10K B 102MB 10K 0050 221M 10K 101 10K 101 10K B 471M 10K 1 3 1 2 3 Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. !Note C41E2.pdf 03.4.16

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

  • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. ZM C haracteristics Part Number Rated Voltage (kV) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) Lead Dia. ø d (mm) D H R 4E4A 101K 2B B DC10 100 +10, -10% 8.0 9.5 7.0 0.65 D H R 4E4A 151K 2B B DC10 150 +10, -10% 8.0 9.5 7.0 0.65 D H R 4E4A 221K 2B B DC10 220 +10, -10% 9.0 9.5 7.0 0.65 D H R 4E4A 331K 2B B DC10 330 +10,-10% 10.0 9.5 7.0 0.65 D H R 4E4A 471K 2B B DC10 470 +10, -10% 12.0 9.5 7.0 0.65 D H R 4E4A 681K 2B B DC10 680 +10, -10% 13.0 9.5 7.0 0.65 D H R 4E4A 102K 2B B DC10 1000 +10, -10% 15.0 9.5 7.0 0.65 D H R 4E4B 101K 2B B DC12 100 +10, -10% 8.0 9.5 7.3 0.65 D H R 4E4B 151K 2B B DC12 150 +10, -10% 9.0 9.5 7.3 0.65 D H R 4E4B 221K 2B B DC12 220 +10, -10% 9.0 9.5 7.3 0.65 D H R 4E4B 331K 2B B DC12 330 +10, -10% 11.0 9.5 7.3 0.65 D H R 4E4B 471K 2B B DC12 470 +10, -10% 12.0 9.5 7.3 0.65 D H R 4E4B 681K 2B B DC12 680 +10, -10% 14.0 9.5 7.3 0.65 D H R 4E4B 102K 2B B DC12 1000 +10, -10% 16.0 9.5 7.3 0.65 D H R 4E4C 101K 2B B DC15 100 +10, -10% 8.0 9.5 8.2 0.65 D H R 4E4C 151K 2B B DC15 150 +10, -10% 9.0 9.5 8.2 0.65 D H R 4E4C 221K 2B B DC15 220 +10, -10% 10.0 9.5 8.2 0.65 D H R 4E4C 331K 2B B DC15 330 +10, -10% 12.0 9.5 8.2 0.65 D H R 4E4C 471K 2B B DC15 470 +10, -10% 13.0 9.5 8.2 0.65 D H R 4E4C 681K 2B B DC15 680 +10, -10% 15.0 9.5 8.2 0.65 D H R 4E4C 102K 2FB DC15 1000 +10, -10% 18.0 12.7 8.2 0.8 B C haracteristics Part Number Rated Voltage (kV) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) Lead Dia. ø d (mm) D H R B 34A 101M 2B B DC10 100 +20, -20% 8.0 9.5 7.0 0.65 D H R B 34A 151M 2B B DC10 150 +20, -20% 8.0 9.5 7.0 0.65 D H R B 34A 221M 2B B DC10 220 +20, -20% 9.0 9.5 7.0 0.65 D H R B 34A 331M 2B B DC10 330 +20, -20% 10.0 9.5 7.0 0.65 D H R B 34A 471M 2B B DC10 470 +20, -20% 12.0 9.5 7.0 0.65 D H R B 34A 681M 2B B DC10 680 +20, -20% 13.0 9.5 7.0 0.65 D H R B 34A 102M 2B B DC10 1000 +20, -20% 15.0 9.5 7.0 0.65 D H R B 34B 101M 2B B DC12 100 +20, -20% 8.0 9.5 7.7 0.65 D H R B 34B 151M 2B B DC12 150 +20, -20% 9.0 9.5 7.5 0.65 D H R B 34B 221M 2B B DC12 220 +20, -20% 9.0 9.5 7.5 0.65 D H R B 34B 331M 2B B DC12 330 +20, -20% 11.0 9.5 7.5 0.65 D H R B 34B 471M 2B B DC12 470 +20, -20% 12.0 9.5 7.5 0.65 D H R B 34B 681M 2B B DC12 680 +20, -20% 14.0 9.5 7.5 0.65 D H R B 34B 102M 2B B DC12 1000 +20, -20% 16.0 9.5 7.5 0.65 D H R B 34C 101M 2B B DC15 100 +20, -20% 8.0 9.5 8.5 0.65 D H R B 34C 151M 2B B DC15 150 +20, -20% 9.0 9.5 8.2 0.65 D H R B 34C 221M 2B B DC15 220 +20, -20% 10.0 9.5 8.2 0.65 D H R B 34C 331M 2B B DC15 330 +20, -20% 12.0 9.5 8.2 0.65 D H R B 34C 471M 2B B DC15 470 +20, -20% 13.0 9.5 8.2 0.65 D H R B 34C 681M 2B B DC15 680 +20, -20% 15.0 9.5 8.2 0.65 D H R B 34C 102M 2FB DC15 1000 +20, -20% 18.0 12.7 8.2 0.8 Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. !Note C41E2.pdf 03.4.16

No. Item Operating Temperature Range Specifications -25 to +100˚C Testing Method 2 Capacitance Within the specified tolerance. The capacitance should be measured at 20°C with 1±0.2kHz and AC 5V(r.m.s.) max. 3 Dissipation Factor (D.F.) Same condition as capacitance.

4 Insulation

Resistance (I.R.) Between Lead Wires 10000M Ω min. The insulation resistance should be measured with DC1000V within 60±5 sec. of charging.

5 Dielectric

No failure. No failure. The capacitor should not be damaged when DC voltage of 150% of the rated voltage is applied between the lead wires for 60±5 sec. in insulating liquid or gas. (Charge/Discharge currentV50mA) The capacitor is placed in the container with metal balls of diameter 1mm so that each lead wire, shortcircuited, is kept approximately 2mm off the metal balls as shown in the figure at right, and DC voltage of 3kV is applied for 10 sec. between capacitor lead wires and metal balls. (Charge/Discharge currentV50mA) ZM B 1.0% max. 2.5% max.

6 Temperature Characteristics

The capacitance measurement should be made at each step specified in table. Capacitance change from the value of step 3 should not exceed the limit specified. Approx. 2m m M etal balls Temp. Char. ZM B Temp. Coefficient or Max. Cap. Change -4700±1000ppm/˚C ±10% Step Char. ZM B 1 2 3 4 5 20±2˚C -25±3˚C 20±2˚C 20±2˚C 85±2˚C 85±2˚C 20±2˚C 20±2˚C

7 Soldering Effect

(Between Lead Wires) No marked defect. Within ±10% No failure. The lead wires should be immersed into the melted solder of 350±10˚C up to about 1.5 to 2.0mm from the main body for 3.5±0.5 sec. Post-treatment: Capacitor should be stored for 24±2 hrs. at *room condition. Humidity (Under Steady State) Appearance Capacitance Change D.F. I.R. Dielectric Strength (Between Lead Wires) No marked defect. Within ±10% 5000M Ω min. No failure. Set the capacitor for 240±8 hrs. at 40±2˚C in 90 to 95% relative humidity. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at *room condition. ZM B 1.5% max. 4.0% max. ZM B 1.5% max. 4.0% max.9 Life Appearance Capacitance Change D.F. I.R. Dielectric Strength (Between Lead Wires) No marked defect. Within ±10% 5000M Ω min. No failure Apply a DC voltage of 125% of the rated voltage for 1000 +48 hrs. in silicon oil at 85±2˚C. Post-treatment: Capacitor should be stored for 24±2 hrs. at *room condition. (Charge/Discharge currentV50mA) Continued on the following page. (Note) Tests for Dielectric Strength (between lead wires), Charge Discharge Test, Humidity, Temperature Cycle and Life should be performed with specimens having molded resin (MR1023C : made by Murata) extending over 3mm on all the surface. * "room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

  • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. !Note C41E2.pdf 03.4.16

No. Item Specifications Testing Method Charge Discharge Test Appearance Capacitance Change D.F. I.R. Dielectric Strength (Between Lead Wires) No marked defect. Within ±10% 5000M Ω min. No failure. Charge discharge test should be measured in the following test circuit and cycle. Applied voltage : Rated voltage Cycle time : 20000 cycle Post-treatment : Capacitor should be stored for 4 hrs. at *room condition. <Circuit> <Cycle> Cx : specimen R 1 : circuit protective resistor (300kΩ ) C 0 : supplied energy for Cx. C0.=.10Cx R 2 : current limitting resistor (E/10Ω ) E : direct-current voltage source ZM B 1.5% max. 4.0% max. E R 1 R 2 SW C 0 C X 1 12 C harge D ischarge (sec.)

11 Temperature

D.F. I.R. Dielectric Strength (Between Lead Wires) No marked defect. Within ±10% 5000M Ω min. No failure. Temperature cycle should be measured in the following test. Cycle time : 5 cycle Post-treatment : Capacitor should be stored for 4 hrs. at *room condition. ZM B 1.5% max. 4.0% max. 30 30 -30˚C +100˚C (m in)

12 Strength

Lead wire should not be cut off. Capacitor should not be broken. Each lead wire should be subjected to 5N of weight and bent 90˚ at the point of egress, in one direciton, then returned to its original position and bent 90˚ in the opposite direction at the rate of one bend in 2 to 3 sec. As shown in the figure at right, fix the body of the capacitor and apply a tensile weight gradually to each lead wire in the radial direction of the capacitor up to 10N and keep it for 10±1 sec. W

13 Solderability of Leads

Lead wire should be soldered with uniform coating on the axial direction over 3 4– of the circumferential direction. The lead wire of a capacitor should be dipped into a 25% methanol solution of rosin and then into molten solder of 235±5˚C for 2±0.5 sec. In both cases the depth of dipping is up to about 1.5 to 2.0mm from the root of lead wires. (Note) Tests for Dielectric Strength (between lead wires), Charge Discharge Test, Humidity, Temperature Cycle and Life should be performed with specimens having molded resin (MR1023C : made by Murata) extending over 3mm on all the surface. * "room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued from the preceding page. Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

  • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. !Note C41E2.pdf 03.4.16

Typical C haracteristics D ata/Packaging !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

  • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Cap.-Temp. Char. ZM Characteristics -20 -40 C ap. C hange (% ) -40 -20 0 20 Tem perature (˚C ) 40 60 80 100 B Characteristics -10 -20 C ap. C hange (% ) -40 -20 0 20 Tem perature (˚C ) 40 60 80 100 n Cap.-DC Bias Char. ZM Characteristics -10 -20 -30 -40 C ap. C hange (% ) 0 10864 14122 D C -BIAS (kV) D C 15kV D C 10kV D C 12kV B Characteristics -40 -20 -60 -80 C ap. C hange (% ) 0 10864 14122 D C -BIAS (kV) D C 15kV D C 10kV D C 12kV n Packaging Styles Bulk Polyethylene Bag Minimum Quantity (Order in Sets Only) Minimum Order Quantity 200 (pcs.) 200 (pcs.)
  • "M inim um Q uantity" m eans the num ber of units of each delivery or order. The quantity should be an integral m ultiple of the "m inim um quantity". (Please note that the actual delivery quantity in a package m ay change som etim es.) n Example FBT (H V) Anode of C R T D H R C apacitor (G N D ) D H R C apacitor Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. !Note C41E2.pdf 03.4.16

D H R Series !C aution/N otice !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

  • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n !Caution (Rating) W hen D C -rated capacitors are to be used in AC or ripple current circuits, be sure to m aintain the Vp-p value of the applied voltage or the Vo-p w hich contains D C bias w ithin the rated voltage range. W hen the voltage is applied to the circuit, starting or stopping m ay generate irregular voltage for a transit period because of resonance or sw itching. Be sure to use a capacitor w ith a rated voltage range that includes these irregular voltages. Voltage Positional Measurement DC Voltage DC+AC Voltage AC Voltage Pulse Voltage (1) Pulse Voltage (2) V0-p V0-p Vp-p Vp-p Vp-p 1. Operating Voltage Keep the surface tem perature of a capacitor below the upper lim it of its rated operating tem perature range. Be sure to take into account the heat generated by the capacitor itself. W hen the capacitor is used in a high- frequency current, pulse current or sim ilar current, it m ay self-generate heat due to dielectric loss. The applied voltage load should be such that the capacitor's self- generated heat is w ithin 10°C at an atm osphere tem perature of 25°C . W hen m easuring, use a therm ocouple of sm all therm al capacity-K of ø0.1m m in conditions w here the capacitor is not affected by radiant heat from other com ponents or surrounding am bient fluctuations. Excessive heat m ay lead to deterioration of the capacitor's characteristics and reliability. (N ever attem pt to perform m easurem ent w ith the cooling fan running. O therw ise, accurate m easurem ent cannot be ensured.) Failure to follow the above cautions may result, worst case, in a short circuit and cause fuming or partial dispersion when the product is used. 2. Operating Temperature and Self-generated Heat n !Caution (Storage and Operation Condition) O perating and storage environm ent The insulating coating of capacitors does not form a perfect seal; therefore, do not use or store capacitors in a corrosive atm osphere, especially w here chloride gas, sulfide gas, acid, alkali, salt or the like are present. And avoid exposure to m oisture. The capacitor is designed to be used in insulating m edia, such as epoxy resin, silicone oil, etc. There m ust be 3m m or m ore of insulating m edia for each direction of the capacitor. Before cleaning, bonding, or m olding this product, verify that these processes do not affect product quality by testing the perform ance of a cleaned, bonded or m olded product in the intended equipm ent. Store the capacitors w here the tem perature and relative hum idity do not exceed -10 to 40 degrees centigrade and 15 to 85% . U se capacitors w ithin 6 m onths. FAILU R E TO FO LLO W TH E ABO VE C AU TIO N S M AY R ESU LT, W O R ST C ASE, IN A SH O R T C IR C U IT AN D C AU SE FU M IN G O R PAR TIAL D ISPER SIO N W H EN TH E PR O D U C T IS U SED . Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. !Note C41E2.pdf 03.4.16

D H R Series !C aution/N otice !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

  • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n !Caution (Soldering and Mounting) 1. Vibration and im pact D o not expose a capacitor or its leads to excessive shock or vibration during use. 2. Soldering W hen soldering this product to a PC B/PW B, do not exceed the solder heat resistance specification of the capacitor. Subjecting this product to excessive heating could m elt the internal junction solder and m ay result in therm al shocks that can crack the ceram ic elem ent. W hen soldering capacitor w ith a soldering iron, it should be perform ed in follow ing conditions. Tem perature of iron-tip: 400 degrees C . m ax. Soldering iron w attage: 50W m ax. Soldering tim e: 3.5 sec. m ax. FAILU R E TO FO LLO W TH E ABO VE C AU TIO N S M AY R ESU LT, W O R ST C ASE, IN A SH O R T C IR C U IT AN D C AU SE FU M IN G O R PAR TIAL D ISPER SIO N W H EN TH E PR O D U C T IS U SED . n !Caution (Handling) Vibration and im pact D o not expose a capacitor or its leads to excessive shock or vibration during use. FAILU R E TO FO LLO W TH E ABO VE C AU TIO N S M AY R ESU LT, W O R ST C ASE, IN A SH O R T C IR C U IT AN D C AU SE FU M IN G O R PAR TIAL D ISPER SIO N W H EN TH E PR O D U C T IS U SED . n Notice (Soldering and Mounting) C leaning (ultrasonic cleaning) To perform ultrasonic cleaning, observe the follow ing conditions. R inse bath capacity : O utput of 20 w atts per liter or less. R insing tim e : 5 m in m axim um . D o not vibrate the PC B/PW B directly. Excessive ultrasonic cleaning m ay lead to fatigue destruction of the lead w ires. n Notice (Rating) C apacitance change of capacitor 1. C lass 1 capacitors C apacitance m ight change a little depending on the surrounding tem perature or an applied voltage. Please contact us if you intend to use this product in a strict tim e constant circuit. 2. C lass 2 and 3 capacitors C lass 2 and 3 capacitors w ith tem perature characteristics B, E and F have an aging characteristic, w hereby the capacitor continually decreases its capacitance slightly if the capacitor is left on for a long tim e. M oreover, capacitance m ight change greatly depending on the surrounding tem perature or an applied voltage. So, it is not likely to be suitable for use in a tim e constant circuit. Please contact us if you need detailed inform ation. Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. !Note C41E2.pdf 03.4.16

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

  • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. High Voltage Ceramic Capacitors DC10-40kV Mold Type DHS N4700 Series (DC10-40kV) Murata's high voltage ceramic capacitors, DHS N4700 series, are designed to meet the stringent requirements of high voltage applications. These capacitors are especially appropriate for applications which require a low dissipation factor and a small voltage coefficient.

Features

  1. Epoxy resin encapsulated 2. Small size 3. Low dissipation factor and low heating value 4. Linear temperature characteristic 5. Low DC, AC-voltage coefficient

Applications

  • Gas laser
  • DC HV power supplies
  • Lightning arresters, voltage distribution systems
  • Electron microscopes, synchroscopes
  • Electrostatic coating machines DC Rated Voltage (kV) Depth of tapped holes (mm) 10, 15 20, 30 L–1.5 øD –1.5 (H) (in mm) DHS4E4A561KC2B DHS4E4A122KH2B DHS4E4A282KL2B DHS4E4A502KR2B DHS4E4A802KT2B DHS4E4C371KC2B DHS4E4C112KH2B DHS4E4C192KL2B DHS4E4C342KR2B DHS4E4C532KT2B 560 1200 2800 5000 8000 370 1100 1900 3400 5300 –10 –20 –20 –10 ISO M4, P0.7 (Metric Screw Thread) No.8-32, NC-2B (Inch Screw Thread) No.8-32, NC-2B (Inch Screw Thread) ISO M4, P0.7 (Metric Screw Thread) DHS4E4A561MCXB DHS4E4A122MHXB DHS4E4A282MLXB DHS4E4A502MRXB DHS4E4A802MTXB DHS4E4C371MCXB DHS4E4C112MHXB DHS4E4C192MLXB DHS4E4C342MRXB DHS4E4C532MTXB 560 1200 2800 5000 8000 370 1100 1900 3400 5300 Continued on the following page. Part Number Capacitance (pF) Capacitance Tolerance (%) DC Rated Voltage (kV) Terminal Type (Screw Thread Type) Dimensions (mm) D LH Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. !Note C41E2.pdf 03.4.16

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

  • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. D H S4E4G 141K C 2B D H S4E4G 441K H 2B D H S4E4G 701K L2B D H S4E4G 132K R 2B D H S4E4G 202K T2B 140 440 700 1300 2000 –20 –20 –10 N o.8-32, N C -2B (Inch Screw Thread) N o.8-32, N C -2B (Inch Screw Thread) ISO M 4, P0.7 (M etric Screw Thread) 36 32 D H S4E4F191M C XB D H S4E4F591M H XB D H S4E4F941M LXB D H S4E4F172M R XB D H S4E4F272M TXB D H S4E4G 141M C XB D H S4E4G 441M H XB D H S4E4G 701M LXB D H S4E4G 132M R XB D H S4E4G 202M TXB 190 590 940 1700 2700 140 440 700 1300 2000 Part Number Capacitance (pF) Capacitance Tolerance (%) DC Rated Voltage (kV) Terminal Type (Screw Thread Type) Dimensions (mm) D L H Continued from the preceding page. D H S4E4D 281K C 2B D H S4E4D 881K H 2B D H S4E4D 142K L2B D H S4E4D 252K R 2B D H S4E4D 402K T2B 280 880 1400 2500 4000 –20 –10 N o.8-32, N C -2B (Inch Screw Thread) ISO M 4, P0.7 (M etric Screw Thread) 24 20 D H S4E4D 281M C XB D H S4E4D 881M H XB D H S4E4D 142M LXB D H S4E4D 252M R XB D H S4E4D 402M TXB 280 880 1400 2500 4000 D H S4E4F191K C 2B D H S4E4F591K H 2B D H S4E4F941K L2B D H S4E4F172K R 2B D H S4E4F272K T2B 190 590 940 1700 2700 –10 ISO M 4, P0.7 (M etric Screw Thread) 28 24 Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. !Note C41E2.pdf 03.4.16

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

  • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Typical C haracteristics D ata / Specifications and Test M ethods –30 –40 –20 0 20 40 60 80 100 –20 1 –10 Tem perature (°C ) C apacitance C hange (% ) D issipation Factor (% ) D issipation Factor C apacitance 100806040200 –20 –10 D C R ated Voltage (% ) C apacitance C hange (% ) C apacitance Frequency (kH z) 1000100101 C apacitance C hange (% ) D issipation Factor (% ) C apacitance D issipation Factor Temperature Characteristic Typical Voltage Coefficient Frequency Characteristic ItemNo Specifications Testing Method Operating Temperature Range Capacitance Temperature Characteristics Dissipation Factor (D.F.) Dielectric Strength Insulation Resistance (I.R.) Strength of Terminal Life Humidity (Under Steady State) Between Terminal Torque Strength Appearance Capacitance Change D.F. I.R. Appearance Capacitance Change D.F. I.R. -20 to +85°C W ithin the specified tolerance. Tem perature coefficient -4700–1000ppm /°C (Tem p. range: +20 to +85°C ) 0.3% m ax. N o failure. 10000M Ω m in. C apacitor should not be broken. N o m arked defect. W ithin –5% 1.0% m ax. 1000M Ω m in. N o m arked defect. W ithin –5% 1.0% m ax. 1000M Ω m in. The capacitance should be m easured at 20°C w ith 1–0.1kH z and AC 1 to 5V(r.m .s.). The capacitance m easurem ent should be m ade at each step specified in table. C apacitance change from the value of step 3 should not exceed the lim it specified. The dissipation factor should be m easured at 20°C w ith 1–0.1kH z and AC 1 to 5V(r.m .s.). The capacitor should not be dam aged w hen D C voltage of 150% of the rated voltage is applied betw een the term inals for 60–5 sec. in insulating liquid or gas. (C harge/D ischarge current V 50m A) The insulation resistance should be m easured w ith D C 1000V w ithin 60–5 sec. of charging. W hen m ounting the capacitor on equipm ent, be sure to m ount them w ithin the torque strength values show n in the table below. Apply a D C voltage of 125% of the rated voltage for 100+24/-0 hrs. in silicon oil at 85–2°C. Post-treatm ent: C apacitor should be stored for 24 hrs. at *room condition. (C harge/D ischarge current V 50m A) Set the capacitor for 100+24/-0 hrs. at 40–2°C in 90 to 95% relative hum idity. Post-treatm ent: C apacitor should be stored for 24 hrs. at *room condition. * "room condition" Tem perature: 15 to 35°C, R elative hum idity: 45 to 75% , Atm ospheric pressure: 86 to 106kPa Step Tem p. (°C ) 20–2 85–2 20–2 Term inal Type ISO M 4, N o.8-32 torque (N ·m ) 1.5 Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. !Note C41E2.pdf 03.4.16

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

  • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. High Voltage Ceramic Capacitors DC10-40kV M old Type D H S Z5V Series (D C 20-40kV)
  1. Epoxy resin encapsulated 2. Sm all size 3. H ighly reliable internal construction 4. W ide selection of values 5. U p to D C 40kV w orking voltage
  • Electrostatic coating m achines
  • Electron m icroscopes, synchroscopes
  • C R T pow er supplies
  • Lightning arrester voltage distribution system s
  • D C H V pow er supplies N o.8-32, N C -2B (Inch Screw Thread) N o.8-32, N C -2B (Inch Screw Thread) N o.8-32, N C -2B (Inch Screw Thread) D H SF44D 601ZD 2B D H SF44D 102ZH 2B D H SF44D 242ZN 2B D H SF44D 332ZR 2B D H SF44D 482ZT2B D H SF44F461ZD 2B D H SF44F781ZH 2B D H SF44F182ZN 2B D H SF44F252ZR 2B D H SF44F362ZT2B D H SF44G 341ZD 2B D H SF44G 571ZH 2B D H SF44G 132ZN 2B D H SF44G 192ZR 2B D H SF44G 272ZT2B 600 1000 2400 3300 4800 460 780 1800 2500 3600 340 570 1300 1900 2700 +80, -20 ISO M 4, P0.7 (M etric Screw Thread) ISO M 4, P0.7 (M etric Screw Thread) ISO M 4, P0.7 (M etric Screw Thread) D H SF44D 601ZD XB D H SF44D 102ZH XB D H SF44D 242ZN XB D H SF44D 332ZR XB D H SF44D 482ZTXB D H SF44F461ZD XB D H SF44F781ZH XB D H SF44F182ZN XB D H SF44F252ZR XB D H SF44F362ZTXB D H SF44G 341ZD XB D H SF44G 571ZH XB D H SF44G 132ZN XB D H SF44G 192ZR XB D H SF44G 272ZTXB 600 1000 2400 3300 4800 460 780 1800 2500 3600 340 570 1300 1900 2700 Part Number Capacitance (pF) Capacitance Tolerance (%) DC Rated Voltage (kV) Terminal Type (Screw Thread Type) Dimensions (mm) D L H L–1.5 øD –1.5 (H ) (in m m ) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. !Note C41E2.pdf 03.4.16

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

  • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Typical C haracteristics D ata Dissipation Factor and Capacitance-Temperature Life Dissipation Factor and Capacitance-Frequency Humidity Typical Voltage Coefficient –60 –40 –20 0 20 40 60 80 100 120 140 –80 –60 –40 –20 +20 2.0 1.0 Tem perature (°C ) C apacitance C hange (% ) D issipation Factor (% ) D issipation Factor C apacitance 1kH z 10kH z 100kH z 1M H z 2.0 1.0 Frequency C apacitance C hange (% ) D issipation Factor (% ) D issipation Factor C apacitance C hange 0 20 40 60 80 100 +10 –10 –20 –30 –40 –50 2.0 1.0 D C R ated Voltage (% ) C apacitance C hange (% ) D issipation Factor (% ) D issipation Factor C apacitance 0 2000 4000 –10 –20 2.0 1.0 Tim e (h) C apacitance C hange (% ) D issipation Factor (% ) D.F. Life C apacitance & D.F. VS Tim e Test Voltage : D C 15kV Tem p. : 85°C 0 100 200 300 400 –10 –20 2.0 1.0 Tim e (h) C apacitance C hange (% ) D issipation Factor (% ) D.F. H um idity C apacitance & D.F. VS C ycles Test Voltage : D C 15kV Tem p. : 60°C R elative H um idity : 90-95% Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. !Note C41E2.pdf 03.4.16

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

  • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Specifications and Test M ethods ItemNo Specifications Testing Method Operating Temperature Range Capacitance Temperature Characteristics Dissipation Factor (D.F.) Dielectric Strength Insulation Resistance (I.R.) Strength of Terminal Life Humidity (Under Steady State) Between Terminal Torque Strength Appearance Capacitance Change D.F. I.R. Appearance Capacitance Change D.F. I.R. -20 to +85°C W ithin the specified tolerance. C apacitance change +22% /-82% (Tem p. range: +10 to +85°C ) 1.5% m ax. N o failure. 10000M Ω m in. C apacitor should not be broken. N o m arked defect. W ithin –20% 5.0% m ax. 1000M Ω m in. N o m arked defect. W ithin –20% 5.0% m ax. 1000M Ω m in. The capacitance should be m easured at 25°C w ith 1–0.1kH z and AC 1 to 5V (r.m .s.). The capacitance m easurem ent should be m ade at each step specified in table. C apacitance change from the value of step 3 should not exceed the lim it specified. The dissipation factor should be m easured at 25°C w ith 1–0.1kH z and AC 1 to 5V (r.m .s.). The capacitor should not be dam aged w hen D C voltage of 150% of the rated voltage is applied betw een the term inals for 60–5 sec. in insulating liquid or gas. (C harge/D ischarge current V 50m A) The insulation resistance should be m easured w ith D C 1000V w ithin 60–5 sec. of charging. W hen m ounting the capacitors on equipm ent, be sure to m ount them w ithin the torque strength values show n in the table below. Apply a D C voltage of 125% of the rated voltage for 100+24/-0 hrs. in silicon oil at 85–2°C. Post-treatm ent: C apacitor should be stored for 24 hrs. at *room condition. (C harge/D ischarge current V 50m A) Set the capacitor for 100+24/-0 hrs. at 40–2°C in 90 to 95% relative hum idity. Post-treatm ent: C apacitor should be stored for 24 hrs. at *room condition. * "room condition" Tem perature: 15 to 35°C, R elative hum idity: 45 to 75% , Atm ospheric pressure: 86 to 106kPa Step Tem p. (°C ) 25–2 -20–3 25–2 85–2 25–2 Term inal Type ISO M 4, N o.8-32 torque (N ·m ) 1.5 Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. !Note C41E2.pdf 03.4.16

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

  • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Caution 1. Operating voltage W hen D C -rated capacitors are to be used in AC or ripple current circuits, be sure to m aintain the Vp-p value of the applied voltage or the Vo-p w hich contains D C bias w ithin the rated voltage range. W hen the voltage is applied to the circuit, starting or stopping m ay generate irregular voltage for a transit period because of resonance or sw itching. Be sure to use a capacitor w ith a rated voltage range that includes these irregular voltages. 2. Operating temperature and self-generated heat Keep the surface tem perature of a capacitor below the upper lim it of its rated operating tem perature range. Be sure to take into account the heat generated by the capacitor itself. W hen the capacitor is used in a high-frequency current, pulse current or sim ilar current, it m ay self-generate heat due to dielectric loss. The applied voltage load should be such that the capacitor's self-generated heat is w ithin 10°C at an atm osphere tem perature of 25°C. W hen m easuring, use a therm ocouple of sm all therm al capacity-K of ø0.1m m in conditions w here the capacitor is not affected by radiant heat from other com ponents or surrounding am bient fluctuations. Excessive heat m ay lead to deterioration of the capacitor's characteristics and reliability. (N ever attem pt to perform m easurem ent w ith the cooling fan running. O therw ise, accurate m easurem ent cannot be ensured.) 3. Installation Installation torque should not exceed the torque strength values in "Specifications and Test M ethods". D o not use a screw w ith a thread depth greater than specified. Avoid installation in w hich any bending torque is applied to the capacitor term inal. D o not rew ork or resolder the term inal. 4. Operating and storage environment The insulating coating of capacitors does not form a perfect seal; therefore, do not use or store capacitors in a corrosive atm osphere, especially w here chloride gas, sulfide gas, acid, alkali, salt or the like are present. And avoid exposure to m oisture. Before cleaning, bonding, or m olding this product, verify that these processes do not affect product quality by testing the perform ance of a cleaned, bonded or m olded product in the intended equipm ent. Store the capacitors w here the tem perature and relative hum idity do not exceed –10 to 40°C and 15 to 85% . U se capacitors w ithin 6 m onths. 5. Vibration and impact D o not expose a capacitor to excessive shock or vibration during use. Failure to follow the above cautions may result, worst case, in a short circuit and cause fuming or partial dispersion when the product is used. D H S Series !C aution and N otice Pulse Voltage (2)Pulse Voltage (1)AC VoltageDC+AC VoltageDC Voltage Positional Measurement Voltage Vo-p Vo-p Vp-p Vp-p Vp-p Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. !Note C41E2.pdf 03.4.16

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

  • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. D H S Series !C aution and N otice Notice Capacitance change of capacitor C lass 1 capacitors C apacitance m ight change a little depending on the surrounding tem perature or an applied voltage. Please contact us if you intend to use this product in a strict tim e constant circuit. C lass 2 and 3 capacitors C lass 2 and 3 capacitors w ith tem perature characteristics B, E and F have an aging characteristic, w hereby the capacitor continually decreases its capacitance slightly if the capacitor is left on for a long tim e. M oreover, capacitance m ight change greatly depending on the surrounding tem perature or an applied voltage. So, it is not likely to be suitable for use in a tim e constant circuit. Please contact us if you need detailed inform ation. Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. !Note C41E2.pdf 03.4.16

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

  • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. ISO 9000 C ertifications Izumo Murata Manufacturing Co., Ltd. Plant Feb. 1. '00 Certified Date U nderw riters Laboratories Inc. Organization A5587 Registration No. ISO 9001 Murata Electronics (Thailand), Ltd. Apr. 8. '02 U nderw riters Laboratories Inc. A6279 ISO 9001 Applied standard M anufacturing plants w hich produce the products in this catalog have obtained the ISO 9000 quality system certificate. Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. !Note C41E2.pdf 03.4.16

Note: 1. Export Control <For customers outside Japan> No muRata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or otherwise contribution to (1) any weapons (Weapons of Mass Destruction (nuclear, chemical or biological weapons or missiles) or conventional weapons) or (2) goods or systems specially designed or intended for military end-use or utilization by military end-users. <For customers in Japan> For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required for export. 2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage a third party's life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog. q Aircraft equipment w Aerospace equipment e Undersea equipment r Power plant equipment t Medical equipment y Transportation equipment (vehicles, trains, ships, etc.) u Traffic signal equipment i Disaster prevention / crime prevention equipment o Data-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed above 3. Product specifications in this catalog are as of April 2003. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers. 4. Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process. International Division 3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: intl@murata.co.jp Head Office 1-10-1, Higashi Kotari, Nagaokakyo-shi, Kyoto 617-8555, Japan Phone: 81-75-951-9111 http://www.murata.com/ Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. !Note C41E2.pdf 03.4.16