C315C109D1G5CA | DigiCamel IC Datasheet

Online Datasheet

Read C315C109D1G5CA online.

C315C109D1G5TA KEMET | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 11

Technical content

© KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 3 MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED Multilayer ceramic capacitors are available in a variety of physical sizes and configurations, including leaded devices and surface mounted chips. Leaded styles include molded and conformally coated parts with axial and radial leads. However, the basic capacitor element is similar for all styles. It is called a chip and consists of formulated dielectric materials which have been cast into thin layers, interspersed with metal electrodes alternately exposed on opposite edges of the laminated structure. The entire structure is fired at high temperature to produce a monolithic block which provides high capacitance values in a small physical volume. After firing, conductive terminations are applied to opposite ends of the chip to make contact with the exposed electrodes. Termination materials and methods vary depending on the intended use. TEMPERATURE CHARACTERISTICS Ceramic dielectric materials can be formulated with a wide range of characteristics. The EIA standard for ceramic dielectric capacitors (RS-198) divides ceramic dielectrics into the following classes: Class I: Temperature compensating capacitors, suitable for resonant circuit application or other appli- cations where high Q and stability of capacitance char- acteristics are required. Class I capacitors have predictable temperature coefficients and are not effected by voltage, frequency or time. They are made from materials which are not ferro-electric, yielding superior stability but low volumetric efficiency. Class I capacitors are the most stable type available, but have the lowest volumetric efficiency. Class II: Stable capacitors, suitable for bypass or coupling applications or frequency discriminating circuits where Q and stability of capacitance char- acteristics are not of major importance. Class II capacitors have temperature characteristics of ± 15% or less. They are made from materials which are ferro-electric, yielding higher volumetric efficiency but less stability. Class II capacitors are affected by temperature, voltage, frequency and time. Class III: General purpose capacitors, suitable for by-pass coupling or other applications in which dielectric losses, high insulation resistance and stability of capacitance characteristics are of little or no importance. Class III capacitors are similar to Class II capacitors except for temperature characteristics, which are greater than ± 15%. Class III capacitors have the highest vol umetric efficiency and poorest stability of any type. KEMET leaded ceramic capacitors are offered in the three most popular temperature characteristics: C0G: Class I, with a temperature coefficient of 0 ± 30 ppm per degree C over an operating temperature range of - 55°C to + 125°C (Also known as “NP0”). X7R: Class II, with a maximum capacitance change of ± 15% over an operating temperature range of - 55°C to + 125°C. Z5U: Class III, with a maximum capacitance change of + 22% - 56% over an operating tem- perature range of + 10°C to + 85°C. Specified electrical limits for these three temperature characteristics are shown in Table 1. SPECIFIED ELECTRICAL LIMITS TEMPERATURE CHARACTERISTICS PARAMETER C0G X7R Z5U Dissipation Factor: Measured at following conditions: C0G — 1 kHz and 1 vrms if capacitance > 1000 pF 1 MHz and 1 vrms if capacitance ≤ 1000 pF 0.15% 2.5% 4.0% X7R — 1 kHz and 1 vrms* or if extended cap range 0.5 vrms Z5U — 1 kHz and 0.5 vrms Dielectric Strength: 2.5 times rated DC voltage. Pass Subsequent IR Test Insulation Resistance (IR): At rated DC voltage, 1,000 M Ω -µF 1,000 M Ω -µF 1,000 M Ω -µF whichever of the two is smaller or 100 G Ω or 100 GΩ or 10 GΩ Temperature Characteristics: Range, °C -55 to +125 -55 to +125 +10 to +85 Capacitance Change without 0 ± 30 ppm/°C ±15% +22%, -56% DC voltage * 1 MHz and 1 vrms if capacitance ≤ 100 pF on military product. Table I Multlayer Ceramic Capacitors

CERAMIC CONFORMALLY COATED/AXIAL & RADIAL PERFORMANCE CHARACTERISTICS FOR STANDARD AND HIGH VOLTAGE © KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-63004 GENERALSPECIFICATIONS Working Voltage: Axial (WVDC) Radial (WVDC) C0G – 50 & 100 50, 100, 200, 500, 1k, 1.5k, 2k, 2.5k, 3k X7R – 50 & 100 50, 100, 200, 500, 1k, 1.5k, 2k, 2.5k, 3k Z5U – 50 & 100 50 & 100 Temperature Characteristics: C0G – 0 ± 30 PPM / °C from - 55°C to + 125°C (1) X7R – ± 15% from - 55°C to + 125°C Z5U – + 22% / -56% from + 10°C to + 85°C Capacitance Tolerance: Construction: Epoxy encapsulated - meets flame test requirements of UL Standard 94V-0. High-temperature solder - meets EIA RS-198, Method 302, Condition B (260°C for 10 seconds) Lead Material: 100% matte tin (Sn) with nickel (Ni) underplate and steel core. Solderability: EIA RS-198, Method 301, Solder Temperature: 230°C ±5°C. Dwell time in solder = 7 ± ½ seconds. Terminal Strength: EIA RS-198, Method 303, Condition A (2.2kg) ELECTRICAL Capacitance @ 25°C: Within specified tolerance and following test conditions. C0G – > 1000pF with 1.0 vrms @ 1 kHz /g1631000pF with 1.0 vrms @ 1 MHz X7R – with 1.0 vrms @ 1 kHz Z5U – with 1.0 vrms @ 1 kHz Dissipation Factor @ 25°C: Same test conditions as capacitance. C0G – 0.15% maximum X7R – 2.5% maximum Z5U – 4.0% maximum Insulation Resistance @ 25°C: EIA RS-198, Method 104, Condition A <1kV C0G – 100k Megohm or 1000 Megohm x µF, whichever is less. /g163500V test @ rated voltage, /g1791kV test @ 500V X7R – 100k Megohm or 1000 Megohm x µF, whichever is less. /g163500V test @ rated voltage, /g1791kV test @ 500V Z5U – 10k Megohm or 1000 Megohm x µF, whichever is less. Dielectric Withstanding Voltage: EIA RS-198, Method 103 /g163200V test @ 250% of rated voltage for 5 seconds with current limited to 50mA. 500V test @ 150% of rated voltage for 5 seconds with current limited to 50mA. /g1791000V test @ 120% of rated voltage for 5 seconds with current limited to 50mA. ENVIRONMENTAL Vibration: EIA RS-198, Method 304, Condition D (10-2000Hz; 20g) Shock: EIA RS-198, Method 305, Condition I (100g) Life Test: EIA RS-198, Method 201, Condition D. /g163/g163/g32200V C0G – 200% of rated voltage @ +125°C X7R – 200% of rated voltage @ +125°C Z5U – 200% of rated voltage @ +85°C /g179/g179/g32500V C0G – rated voltage @ +125°C X7R – rated voltage @ +125°C Post Test Limits @ 25°C are: Capacitance Change: C0G (/g163200V) – +3% or 0.25pF, whichever is greater. C0G (/g179500V) – +3% or 0.50pF, whichever is greater. X7R – + 20% of initial value (2) Z5U – + 30% of initial value (2) Dissipation Factor: C0G – 0.15% maximum X7R – 2.5% maximum Z5U – 4.0% maximum Insulation Resistance: C0G – 10k Megohm or 100 Megohm x µF, whichever is less. /g1791kV tested @ 500V. X7R – 10k Megohm or 100 Megohm x µF, whichever is less. /g1791kV tested @ 500V. Z5U – 1k Megohm or 100 Megohm x µF, whichever is less. Moisture Resistance: EIA RS-198, Method 204, Condition A (10 cycles without applied voltage.) Post Test Limits @ 25°C are: Capacitance Change: C0G (/g163200V) – +3% or 0.25pF, whichever is greater. C0G (/g179500V) – +3% or 0.50pF, whichever is greater. X7R – + 20% of initial value (2) Z5U – + 30% of initial value (2) Dissipation Factor: C0G – 0.25% maximum X7R – 3.0% maximum Z5U – 4.0% maximum Insulation Resistance: C0G – 10k Megohm or 100 Megohm x µF, whichever is less. /g163500V test @ rated voltage, /g1791kV test @ 500V. X7R – 10k Megohm or 100 Megohm x µF, whichever is less. /g179500V test @ rated voltage, >1kV test @ 500V. Z5U – 1k Megohm or 100 Megohm x µF, whichever is less. Thermal Shock: EIA RS-198, Method 202, Condition B (C0G & X7R: -55°C to +125°C); Condition A (Z5U: -55°C to 85°C) (1)+53 PPM -30 PPM/ °C from +25°C to -55°C, + 60 PPM below 10pF. (2)X7R and Z5U dielectrics exhibit aging characteristics; there- fore, it is highly recommended that capacitors be deaged for 2 hours at 150°C and stabilized at room temperature for 48 hours before capacitance measurements are made.

S C315 C320 C330 C340 C350 H C333 H *.276 (7.00) MIN. S C323 H S C317 C322 S D .060 (1.52) MAX. L T C330 H DIMENSIONS — INCHES & MILLIMETERS CASE L H T S(1) D For packaging information, see pages 40, and 41. M102320 T5C AR1C CERAMIC CASE SIZE (See Table Above) SPECIFICATION C — Standard CAPACITANCE, CODE Expressed in Picofarads (pF) First Two Digits — Significant Figures Third Digit — Number of Zeros (Use 9 for 1.0 thru 9.9 pF . Example: 2.2pF — 229) FAILURE RATE INTERNAL CONSTRUCTION CAPACITANCE TOLERANCE D — ±0.5 pF F — ±1% G — ±2% J — ±5% A — Not Applicable K — ±10% M — ±20% Z — -20, +80% TERMINATION MATERIAL T — 100% Tin H — SnPb C — 100% Sn (Not recommended for new design) 5 — Standard DIELECTRIC EIA Designation G — C0G (NP0) — Ultra-Stable R — X7R — Stable U — Z5U — General Purpose RATED VOLTAGE 2 — 200 1 — 100 5 — 50 C — 500 D — 1000 *Part Number Example: C320C102M1R5CA (14 digits – no spaces) P — 0%, +100% F — 1500 G — 2000 Z — 2500 H — 3000

ORDERING INFORMATION

Drawings are not to scale. See table below for dimensions. See page 10 for optional lead configurations. STANDARD LEAD CONFIGURATION — OUTLINE DRAWINGS © KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 9 CERAMIC CONFORMALLY COATED/RADIAL “STANDARD & HIGH VOLTAGE GOLDEN MAX” Golden Max NOTE: 1 inch = 25.4 mm. NOTE: (1) Measured at seating plane. Case Size L Max. Max Standard T Max. High Voltage T Max. S(1) ±.030 (.78) D +.004(.10) -.001(.025)

.100" ± .030 Lead Spacing .200" ± .030 Lead Spacing .200" ± .030 Lead Spacing .200" ± .030 Lead Spacing Lead Spacing .150 MAX. .210 MAX. .276 MIN. .100 C 3 1 5 .150 MAX. .230 MAX. .230 ±.030 .100 C 3 1 6 .200 .200 MAX. .260 MAX. .276 MIN. .200 C 3 2 2 C 3 2 3 .320 MAX. .276 MIN. .200 .200 MAX. .150 MAX. .230 MAX. .276 MIN. .200 C 3 1 7 .150 MAX. .235 MAX. .276 MIN. .200 C 3 1 8 .200 MAX. .325 MAX. .276 MIN. C 3 2 8 .200 .200 MAX. .350 MAX. .230 ±.030 .200 C 3 2 7 .270 .200 MAX. .320 MAX. .276 MIN. .200 C 3 2 5 .300 MAX. .360 MAX. .276 MIN. .250 C 3 3 1 .200 MAX. .260 MAX. .276 MIN. .250 C 3 2 1 .500 MAX. .560 MAX. .276 MIN. .400 C 3 5 0 .500 MAX. .670 MAX. .230 ±.030 C 3 5 6 .400 .520 .400 MAX. .590 MAX. .230 ±.030 .200 C 3 4 6 .320 .400 MAX. .460 MAX. .276 MIN. .200 C 3 4 0 .200 MAX. .260 MAX. .276 MIN. .100 C 3 2 0 .200 MAX. .260 MAX. .276 MIN. .100 C 3 2 4 C 3 2 6 .230 ± .030 .100 .200 MAX. .350 MAX. .300 MAX. .360 MAX. .276 MIN. .200 C 3 3 0 .300 MAX. .390 MAX. .276 MIN. .200 C 3 3 3 .300 MAX. .420 MAX. .276 MIN. .200 C 3 3 5 .300 MAX. .450 MAX. .230 ±.030 .200 C 3 3 6 .300 The preferred lead wire configurations are shown on page 9. However, additional configurations are available. All available options, including those on page 9, are shown below grouped by lead spacing. OPTIONAL CONFIGURATIONS BY LEAD SP ACING .200.125 .250" ± .030 (Available in bulk only) .400" ± .030 (Available in bulk only) CERAMIC CONFORMALLY COATED/RADIAL “STANDARD & HIGH VOLTAGE GOLDEN MAX” © KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-630010 Note: Non-standard lead lengths are available in bulk only. Note: C330 Shoulder bend leads: X7R/50V 683-105 Z5U/100V 683-334

© KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 11 CERAMIC CONFORMALLY COATED/RADIAL “STANDARD & HIGH VOLTAGE GOLDEN MAX” Golden Max CAPACITOR MARKINGS Manufacturer (KEMET) Rated Voltage 5 - 50 volts 1 - 100 volts 2 - 200 volts Capacitance Tolerance Manufacturer (KEMET) Capacitance & Tolerance Dielectric C0G X7R Z5U Rated VoltageCapacitance Code Date Code Front K1K Back 102 C31X & C32X Size KX7R 105K 100V 0212 C340 & C350 Size Rated Voltage 5 - 50 volts 1 - 100 volts 2 - 200 volts Manufacturer (KEMET) Capacitance Tolerance Capacitance Code Dielectric G - C0G R - X7R U - Z5U K5U 104M C33X Size RATINGS & PART NUMBER REFERENCE: ULTRA-STABLE TEMPERATURE CHARACTERISTICS – C0G/NPO For packaging information, see pages 40 and 41. K Manufacturer (KEMET) 50 100 200 500 1k 50 100 200 500 1k 1.5k 2k 50 100 200 500 1k 1.5k 2k 2.5k 3k 50 100 200 500 1k 2k 3k 50 100 200 500 1k 2k 3k 1.0pF 109 D 1.1 119 D 1.2 129 D 1.3 139 D 1.5 159 D 1.6 169 D 1.8 189 D 2.0 209 D 2.2 229 D 2.4 249 D 2.7 279 D 3.0 309 D 3.3 339 D 3.6 369 D 3.9 399 D 4.3 439 D 4.7 479 D 5.1 519 D 5.6 569 D 6.2 629 D 6.8 689 D 7.5 759 D 8.2 829 D 9.1 919 D 10 100 J,K 11 110 J,K 12 120 J,K 13 130 J,K 15 150 J,K 16 160 J,K 18 180 J,K 20 200 J,K 22 220 J,K 24 240 G,J,K 27 270 G,J,K 30 300 G,J,K 33 330 G,J,K 36 360 G,J,K 39 390 G,J,K 43 430 G,J,K 47 470 G,J,K 51 510 G,J,K 56 560 F,G,J 62 620 F,G,J 68 680 F,G,J 75 750 F,G,J 82 820 F,G,J 91 910 F,G,J WVDCWVDC WVDC WVDC WVDC C35XC31X C32X C33X C34XStyle Cap Cap Code Cap Tol

© KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-630012 For packaging information, see pages 40 and 41. CERAMIC CONFORMALLY COATED/RADIAL “STANDARD & HIGH VOLTAGE GOLDEN MAX” RATINGS & PART NUMBER REFERENCE: ULTRA-STABLE TEMPERATURE CHARACTERISTICS — C0G/NPO CONT. 50 100 200 500 1k 50 100 200 500 1k 1.5k 2k 50 100 200 500 1k 1.5k 2k 2.5k 3k 50 100 200 500 1k 2k 3k 50 100 200 500 1k 2k 3k 100 101 F,G,J 110 111 F,G,J 120 121 F,G,J 130 131 F,G,J 150 151 F,G,J 160 161 F,G,J 180 181 F,G,J 200 201 F,G,J 220 221 F,G,J 240 241 F,G,J 270 271 F,G,J 300 301 F,G,J 330 331 F,G,J 360 361 F,G,J 390 391 F,G,J 430 431 F,G,J 470 471 F,G,J 510 511 F,G,J 560 561 F,G,J 620 621 F,G,J 680 681 F,G,J 750 751 F,G,J 820 821 F,G,J 910 911 F,G,J 1000 102 F,G,J 1100 112 F,G,J 1200 122 F,G,J 1300 132 F,G,J 1500 152 F,G,J 1600 162 F,G,J 1800 182 F,G,J 2000 202 F,G,J 2200 222 F,G,J 2400 242 F,G,J 2700 272 F,G,J 3000 302 F,G,J 3300 332 F,G,J 3600 362 F,G,J 3900 392 F,G,J 4300 432 F,G,J 4700 472 F,G,J 5100 512 F,G,J 5600 562 F,G,J 6200 622 F,G,J 6800 682 F,G,J 7500 752 F,G,J 8200 822 F,G,J 9100 912 F,G,J .010uF 103 F,G,J .015 123 F,G,J .015 153 F,G,J .018 183 F,G,J .022 223 F,G,J .027 273 F,G,J .033 333 F,G,J .039 393 F,G,J .047 473 F,G,J .056 563 F,G,J .068 683 F,G,J .082 823 F,G,J .10 104 F,G,J .12 124 F,G,J Style C31X C32X C34X C35X WVDC WVDC WVDC WVDC WVDC Cap Cap Code Cap Tol C33X

For packaging information, see pages 40 and 41. © KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 13 CERAMIC CONFORMALLY COATED/RADIAL “STANDARD & HIGH VOLTAGE GOLDEN MAX” RATINGS & PART NUMBER REFERENCE: STABLE TEMPERATURE CHARACTERISTICS — X7R Golden Max 50 100 200 500 1k 50 100 200 500 1k 1.5k 2k 50 100 200 500 1k 1.5k 2k 2.5k 3k 50 100 200 500 1k 2k 3k 50 100 200 500 1k 2k 3k 10pF 100 K,M,P,Z 12 120 K,M,P,Z 15 150 K,M,P,Z 18 180 K,M,P,Z 22 220 K,M,P,Z 27 270 K,M,P,Z 33 330 K,M,P,Z 39 390 K,M,P,Z 47 470 K,M,P,Z 56 560 K,M,P,Z 68 680 K,M,P,Z 82 820 K,M,P,Z 100 101 K,M,P,Z 120 121 K,M,P,Z 150 151 K,M,P,Z 180 181 K,M,P,Z 220 221 K,M,P,Z 270 271 K,M,P,Z 330 331 K,M,P,Z 390 391 K,M,P,Z 470 471 K,M,P,Z 560 561 K,M,P,Z 680 681 K,M,P,Z 820 821 K,M,P,Z 1000 102 K,M,P,Z 1200 122 K,M,P,Z 1500 152 K,M,P,Z 1800 182 K,M,P,Z 2200 222 K,M,P,Z 2700 272 K,M,P,Z 3300 332 K,M,P,Z 3900 392 K,M,P,Z 4700 472 K,M,P,Z 5600 562 K,M,P,Z 6800 682 K,M,P,Z 8200 822 K,M,P,Z .010uF 103 K,M,P,Z .012 123 K,M,P,Z .015 153 K,M,P,Z .018 183 K,M,P,Z .022 223 K,M,P,Z .027 273 K,M,P,Z .033 333 K,M,P,Z .039 393 K,M,P,Z .047 473 K,M,P,Z .056 563 K,M,P,Z .068 683 K,M,P,Z .082 823 K,M,P,Z .10 104 K,M,P,Z ## .12 124 K,M,P,Z .15 154 K,M,P,Z .18 184 K,M,P,Z .22 224 K,M,P,Z .27 274 K,M,P,Z .33 334 K,M,P,Z .39 394 K,M,P,Z .47 474 K,M,P,Z .56 564 K,M,P,Z .68 684 K,M,P,Z .82 824 K,M,P,Z 1.0 105 K,M,P,Z 1.2 125 K,M,P,Z 1.5 155 K,M,P,Z 1.8 185 K,M,P,Z 2.2 225 K,M,P,Z 2.7 275 K,M,P,Z 3.3 335 K,M,P,Z 3.9 395 K,M,P,Z 4.7 475 K,M,P,Z 5.6 565 K,M,P,Z 6.8 685 K,M,P,Z C330 shoulder bend lead configuration is standard for these cap codes. # X7R Dielectric--extended range value--Cap and DF measured @0.5Vrms. WVDCWVDC WVDC WVDC WVDC C35XC31X C32X C33X C34X Cap Style Cap Code Cap Tol

© KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-630014 CERAMIC CONFORMALLY COATED/RADIAL “STANDARD & HIGH VOLTAGE GOLDEN MAX” RATINGS & PART NUMBER REFERENCE GENERAL PURPOSE TEMPERATURE CHARACTERISTIC – Z5U For packaging information, see pages 40 and 41. 50 100 200 50 100 200 50 100 200 50 100 200 50 100 200 1000pF 102 M,P,Z 1200 122 M,P,Z 1500 152 M,P,Z 1800 182 M,P,Z 2200 222 M,P,Z 2700 272 M,P,Z 3300 332 M,P,Z 3900 392 M,P,Z 4700 472 M,P,Z 5600 562 M,P,Z 6800 682 M,P,Z 8200 822 M,P,Z .010uF 103 M,P,Z .012 123 M,P,Z .015 153 M,P,Z .018 183 M,P,Z .022 223 M,P,Z .027 273 M,P,Z .033 333 M,P,Z .039 393 M,P,Z .047 473 M,P,Z .056 563 M,P,Z .068 683 M,P,Z .082 823 M,P,Z .10 104 M,P,Z .12 124 M,P,Z .15 154 M,P,Z .18 184 M,P,Z .22 224 M,P,Z .27 274 M,P,Z .33 334 M,P,Z .39 394 M,P,Z .47 474 M,P,Z .56 564 M,P,Z .68 684 M,P,Z .82 824 M,P,Z 1.0 105 M,P,Z 1.2 125 M,P,Z 1.5 155 M,P,Z 1.8 185 M,P,Z 2.2 225 M,P,Z 2.7 275 M,P,Z 3.3 335 M,P,Z 3.9 395 M,P,Z 4.7 475 M,P,Z 5.6 565 M,P,Z 6.8 685 M,P,Z C330 shoulder bend lead configuration is standard for these cap codes. WWDCWWDC WWDC WWDC WWDC Style Cap Cap Code Cap Tol C35XC31X C32X C34XC33X

© KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 41 CERAMIC LEADED PACKAGING INFORMATION Tape and Reel Packaging KEMET Series Military Style Military Specification Standard (1) Bulk Quantity Ammo Pack Quantity Maximum Maximum Reel Quantity Reel Size C114C-K-G CK12, CC75 MIL-C-11015/ 200/Box 5000 12" C124C-K-G CK13, CC76 MIL-PRF-20 200/Box 5000 12" C192C-K-G CK14, CC77 100/Box 3000 12" C202C-K CK15 25/Box 500 12" C222C-K CK16 10/Tray 300 12" C052C-K-G CK05, CC05 100/Bag 2000 2000 12" C062C-K-G CK06, CC06 100/Bag 1500 1500 12" C114G CCR75 MIL-PRF-20 200/Box 5000 12" C124G CCR76 200/Box 5000 12" C192G CCR77 100/Box 3000 12" C202G CC78-CCR78 25/Box 500 12" C222G CC79-CCR79 10/Tray 300 12" C052/56G CCR05 100/Bag 1700 12" C062/66G CCR06 100/Bag 1500 12" C512G CC07-CCR07 Footnote (2) N/A N/A C522G CC08-CCR08 Footnote (2) N/A N/A C114T CKR11 MIL-PRF-39014 200/Box 5000 12" C124T CKR12 200/Box 5000 12" C192T CKR14 100/Box 3000 12" C202T CKR15 25/Box 500 12" C222T CKR16 10/Tray 300 12" C052/56T CKR05 100/Bag 1700 12" C062/66T CKR06 100/Bag 1500 12" C31X 500/Bag 2500 2500 12" C32X 500/Bag 2500 2500 12" C33X 250/Bag 1500 1500 12" C340 100/Bag 1000 1000 12" C350 50/Bag N/A N/A N/A C410 300/Box 4000 5000 12" C412 200/Box 4000 5000 12" C420 300/Box 4000 5000 12" C430 200/Box 2000 2500 12" C440 200/Box 2000 2500 12" C512 N/A N/A Footnote (2) N/A N/A C522 N/A N/A Footnote (2) N/A N/A C617 500/Bag C622/C623 500/Bag C627/C628 500/Bag C630/C631 250/Bag C637/C638 250/Bag C640/C641 100/Bag C642/C643 100/Bag C647/C648 100/Bag C657/C658 50/Bag C667/C668 50/Bag CERAMIC PACKAGING NOTE: (1) Standard packaging refers to number of pieces per bag, tray or vial. (2) Quantity varies. For further details, please consult the factory.

Product Information

C315C109D1G5CA specifications and overview.

Summary

MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED

Description

MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED

Source title C315C109D1G5CA Datasheet(PDF) - Kemet Corporation

Related Parts

More parts from the same family.

Browse manufacturer