C2023J5003AHF ANAREN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Place Manufacturing. USA/Canada: Toll Free: Europe : (315) 432h8909 (800) 411h6596 +44 2392h232392 Model C2023 J5003A HF Rev A Ultra Low Profile 0805 3 dB, 90° Hybrid Coupler

Description

The C2023J503AHF is a low cost, low pr ofile subhminiature high performance 3 dB coupler in an easy to use surface mount package. It is designed for WiMax,WiBro, UMTS, and IMT2000 applications. Th e C2023J503AHF is ideal for balanced power and low noise amplifiers, plus s ignal distribution and other applications where low insertion loss and tight amp litude and phase balance are required. The C2023J503AHF is available on tape an d reel for pick and place high volume manufacturing. All of the Xinger components are constructed from ceramic filled PTFE composites which possess excellent electrical and mechanical stability having X and Y thermal coefficient of expansion (CTE) of 17 ppm/°C Detailed Electrical Specifications: Specifications subject to change without notice. ROOM (25 °° °°C) Parameter Min. Typ. Max Unit Frequency 2000 2300 MHz Port Impedance 50 Ω Return Loss 18 22 dB Isolation 21 25 dB Insertion Loss* 0.3 0.4 dB Amplitude Balance 0.1 0.8 dB Phase Balance (relative to 90°) 2 6 Degrees Power Handling 4 Watts Features:

  • 2000 – 2300 MHz
  • 0.7mm Height Profile
  • WiMax, WiBro, UMTS & IMT2000 applications
  • High Isolation & Low Loss
  • Surface Mountable
  • Tape & Reel
  • Non-conductive Surface
  • RoHS Compliant
  • Halogen-Free Operating Temperature h55 +85 ºC * Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC) Outline Drawing Mechanical Outline Dimensions are in Inches [Millimeters] Tolerances are NonhCumulative .049 ±.004 [1.25 ±0.10 ] .079 ±.004 [2.00 ±0.10 ] 1 2 3 6 5 4 Bottom View (Farhside) Side View Top View (Nearhside) .027 ±.002 [0.68 ±0.05 ] 6X .009 [0.22] 6X .012 [0.30] Pin Designation Input GND Isolated Direct GND Coupled Orientation Marker Denotes Pin Location Orientation Marker Denotes Pin Location 4X .026 [0.65] .039 [0.98]

USA/Canada: Toll Free: Europe: (315) 432h8909 (800) 411h6596 +44 2392h232392 Available on Tape and Reel for Pick and Place Manufacturing. Model C2023 J5003A HF Rev A Typical Broadband Performance: 500 MHz. to 6000 MHz. Return Loss - Input h36 h33 h30 h27 h24 h21 h18 h15 h12 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 Frequency [MHz] [dB] Insertion Loss h3.600 h3.300 h3.000 h2.700 h2.400 h2.100 h1.800 h1.500 h1.200 h0.900 h0.600 h0.300 0.000 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 Frequency [MHz] [dB] Amplitude Balance h1.5 h0.5 0.5 1.5 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 Frequency [MHz] [dB] Phase Balance h20 h15 h10 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 Frequency [MHz] deg Isolation h36 h33 h30 h27 h24 h21 h18 h15 h12 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 Frequency [MHz] [dB]

Place Manufacturing. USA/Canada: Toll Free: Europe : (315) 432h8909 (800) 411h6596 +44 2392h232392 Model C2023 J5003A HF Rev A Typical Performance: 1900 MHz. to 2400 MHz. Return Loss - Input h36 h33 h30 h27 h24 h21 h18 h15 h12 1900 2000 2100 2200 2300 2400 Frequency [MHz] [dB] Insertion Loss h3.6 h3.3 h3.0 h2.7 h2.4 h2.1 h1.8 h1.5 h1.2 h0.9 h0.6 h0.3 0.0 1900 2000 2100 2200 2300 2400 Frequency [MHz] [dB] Amplitude Balance h1.5 h0.5 0.5 1.5 1900 2000 2100 2200 2300 2400 Frequency [MHz] [dB] Phase Balance h20 h15 h10 1900 2000 2100 2200 2300 2400 Frequency [MHz] deg Isolation h36 h33 h30 h27 h24 h21 h18 h15 h12 1900 2000 2100 2200 2300 2400 Frequency [MHz] [dB]

USA/Canada: Toll Free: Europe: (315) 432h8909 (800) 411h6596 +44 2392h232392 Available on Tape and Reel for Pick and Place Manufacturing. Model C2023 J5003A HF Rev A Mounting Configuration: In order for Xinger surface mount components to wor k optimally, the proper impedance transmission line s must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VS WR may not meet published specifications. All of the Xinger components are constructed from c eramic filled PTFE composites which possess excelle nt electrical and mechanical stability having X and Y thermal coefficient of expansion (CTE) of 17 ppm/ oC. An example of the PCB footprint used in the testing of these parts is shown below. In specific design s, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. Mounting Footprint Dimensions are in Inches [Millimeters] .026 [0.66] 6X .013 [0.33] 4X .012 [0.30] Plated thru holes to ground Circuit Pattern Footprint Pad (s) Solder Resist 6X .014 [0.35] 6X .002 [0.05] 4X Transmission Line

Place Manufacturing. USA/Canada: Toll Free: Europe : (315) 432h8909 (800) 411h6596 +44 2392h232392 Model C2023 J5003A HF Rev A Packaging and Ordering Information Parts are available in reel and are packaged per EIA 481h2. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. See Model Numbers below for further ordering information . B ØA ØC REEL DIMENSIONS (inches [mm]) ØA B ØC 0.32 [8.0] 2.0 [50.8] 7.00 [177.8] 4000 QUANTITY/REEL TABLE 1 ØD 0.512 [13.0] ØD

Click to View Pricing, Inventory, Delivery & Lifecycle Information: Anaren: C2023J5003AHF