C2023J5003A00 ANAREN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Model C2023J5003A00 Rev D Ultra Low Profile 0805 3 dB, 90° Hybrid Coupler

Description

The C2023J503A00 is a low cost, low profile sub-miniature high performance 3 dB coupler in an easy to use surface mount package. It is designed for WiMax,WiBro, UMTS, and IMT2000 applications. The C2023J503A00 is ideal for balanced power and low noise amplifiers, plus signal distribution and other applications where low insertion loss an d tight amplitude and phase balance are required. The C2023J503A00 is available on tape and reel for pick and place high volume manufacturing. All of the Xinger components are c onstructed from ceramic filled PTFE composites which possess excellent electrical and mechanical stability having X and Y thermal coefficient of expansion (CTE) of 17 ppm/°C Detailed Electrical Specifications: Specifications subject to change without notice. ROOM (25°C) Parameter Min. Typ. Max Unit Frequency 2000 2300 MHz Port Impedance 50 Ω Return Loss 18 22 dB Isolation 21 25 dB Insertion Loss* 0.3 0.4 dB Amplitude Balance 0.1 0.8 dB Phase Balance (relative to 90°) 2 6 Degrees Power Handling 4 Watts Features:

  • 2000 – 2300 MHz
  • 0.7mm Height Profile
  • WiMax, WiBro, UMTS & IMT2000 applications
  • Low Insertion Loss
  • High Isolation
  • Surface Mountable
  • Tape & Reel
  • Non-conductive Surface
  • RoHS Compliant Operating Temperature -55 +85 ºC * Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC) Outline Drawing Mechanical Outline Dimensions are in Inches [Millimeters] Tolerances are Non-Cumulative 1 2 3 6 5 4 Bottom View (Far-side)Side ViewTop View (Near-side) 6X .009 [0.22] 6X .012 [0.30] 4X .026 [0.65] Orientation Marker Denotes Pin Location Orientation Marker Denotes Pin Location .028±.002 [0.700±0.05] Coupled GND Direct Isolated GND Input Designation Pin .049±.004 [1.25±0.10] .079±.004 [2.00±0.10] .039 [0.98]

USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Available on Tape and Reel for Pick and Place Manufacturing. Model C2023J5003A00 Rev D Typical Broadband Performance: 500 MHz. to 6000 MHz. Return Loss - Input -36 -33 -30 -27 -24 -21 -18 -15 -12 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 Frequency [MHz] [dB] Insertion Loss -3.600 -3.300 -3.000 -2.700 -2.400 -2.100 -1.800 -1.500 -1.200 -0.900 -0.600 -0.300 0.000 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 Frequency [MHz] [dB] Amplitude Balance -1.5 -0.5 0.5 1.5 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 Frequency [MHz] [dB] Phase Balance -20 -15 -10 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 Frequency [MHz] deg Isolation -36 -33 -30 -27 -24 -21 -18 -15 -12 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 Frequency [MHz] [dB]

Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Model C2023J5003A00 Rev D Typical Performance: 1900 MHz. to 2400 MHz. Return Loss - Input -36 -33 -30 -27 -24 -21 -18 -15 -12 1900 2000 2100 2200 2300 2400 Frequency [MHz] [dB] Insertion Loss -3.6 -3.3 -3.0 -2.7 -2.4 -2.1 -1.8 -1.5 -1.2 -0.9 -0.6 -0.3 0.0 1900 2000 2100 2200 2300 2400 Frequency [MHz] [dB] Amplitude Balance -1.5 -0.5 0.5 1.5 1900 2000 2100 2200 2300 2400 Frequency [MHz] [dB] Phase Balance -20 -15 -10 1900 2000 2100 2200 2300 2400 Frequency [MHz] deg Isolation -36 -33 -30 -27 -24 -21 -18 -15 -12 1900 2000 2100 2200 2300 2400 Frequency [MHz] [dB]

USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Available on Tape and Reel for Pick and Place Manufacturing. Model C2023J5003A00 Rev D Mounting Configuration: In order for Xinger surface mount components to work opti mally, the proper impedance transmission lines must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. All of the Xinger components are constructed from ceramic filled PTFE composites which possess excellent electrical and mechanical stability having X and Y thermal coefficient of expansion (CTE) of 17 ppm/oC. An example of the PCB footprint used in the testing of these parts is shown below. In specific designs, the transmission line widths need to be adjusted to the unique di electric coefficients and thicknesses as well as varying pick and place equipment tolerances. Mounting Footprint Dimensions are in Inches [Millimeters] .026 [0.66] 6X .013 [0.33] 4X .012 [0.30] Plated thru holes to ground Circuit Pattern Footprint Pad (s) Solder Resist 6X .014 [0.35] 6X .002 [0.05] 4X Transmission Line

Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Model C2023J5003A00 Rev D Packaging and Ordering Information Parts are available in reel and are packaged per EIA 481-2. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. See Model Numbers below for further ordering information. B ØA ØC REEL DIMENSIONS (inches [mm]) ØA B ØC 0.32 [8.0] 2.0 [50.8] 7.00 [177.8] 4000 QUANTITY/REEL TABLE 1 ØD 0.512 [13.0]ØD

USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Available on Tape and Reel for Pick and Place Manufacturing. Model C2023J5003A00 Rev D