C16491 LEDIL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Product Number C16491_XTM-ADAPTER-50-A Family Konntakt Type Base part Color white Diameter 50mm mm Height 11,8mm mm Style round Optic Material Holder Material PC Fastening screw Status production ready ROHS Compliant Yes Date Updated 16/02/2018 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector XTM - 9mm LES sim: 0 - sim: 0.000 - April 4th 2018 3:29 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10

24240 SALO, Finland

http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001

D E C F B G A H SCALE 1:1 WEIGHT 4,68 g A3 SHEET 1/1 Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L FIRST ANGLE PROJECTION: This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. PRODUCT C16491_XTM-ADAPTER-50-A MECHANICAL DRAWING PART TYPE MATERIAL COLOR / COATING C16491_XTM-ADAPTER-50-A_Mechanicalmodel_20171108_jv PC grey Dimension [mm] PMMA / PC >0-6 ± 0.2 >6-22 ± 0.25 >22-40 ± 0.30 >40-90 ± 0.44 >90-160 ± 0.60 >160-200 ± 0.70 >200-315 ± 1.1 GENERAL MOULDING TOLERANCES PCB or heatsink level. LED location. Ensure LED fitting from a product specific 3D model available from www.ledil.com. See installation details in page 2. Notes 120 120 See Notes green area 4.02 7.8 3.95 21.4 3.4 (x3) See Notes red areas 11.81 Isometric views (1:1)

D E C F B G A H SCALE 1:1 WEIGHT 4,68 g A3 SHEET 1/1 Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L FIRST ANGLE PROJECTION: This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. PRODUCT C16491_XTM-ADAPTER-50-A MECHANICAL DRAWING PART TYPE MATERIAL COLOR / COATING C16491_XTM-ADAPTER-50-A_Mechanicalmodel_20171108_jv PC grey Dimension [mm] PMMA / PC >0-6 ± 0.2 >6-22 ± 0.25 >22-40 ± 0.30 >40-90 ± 0.44 >90-160 ± 0.60 >160-200 ± 0.70 >200-315 ± 1.1 GENERAL MOULDING TOLERANCES PCB or heatsink level. LED location. Ensure LED fitting from a product specific 3D model available from www.ledil.com. Notes LENS for reference only 3x M3 Screws for fixing C16491_XTM_ADAPTER-50-A Max. tightening torque: 0,6Nm XTM LED MODULE for reference 2.7 Direction of LED module wiring XTM LED module Beam direction with asymmetrical optics

NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. GENERAL INFORMATION - Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible. Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL products being used outside of the recommended temperature range.