C1517J5003AHF ANAREN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432,8909 (800) 411,6596 +44 2392,232392 +86 512,62749282 Model C1517J5003AHF Rev D Ultra Low Profile 0805 3 dB, 90° Hybrid Coupler

Description

The C1517J5003AHF is a low cost, low p rofile sub,miniature high performance 3 dB coupler in an easy to use surface mount package. The C1517J5003AHF is ideal for balanced power and low n oise amplifiers, plus signal distribution and other applications where low inser tion loss and tight amplitude and phase balance are required. The C1517J5003AHF is a vailable on tape and reel for pick and place high volume manufacturing. All of the Xinger components are construc ted from ceramic filled PTFE composites which possess excellent electrical and m echanical stability. All parts have been subjected to rigorous qualification testing and units are 100% RF tested. Detailed Electrical Specifications: Specifications subject to change without notice. Features:

  • 1500 – 1700 MHz
  • 0.7mm Height Profile
  • High Isolation & Low Loss
  • LTE Bands: 24
  • Surface Mountable
  • Tape & Reel
  • Non-conductive Surface
  • RoHS Compliant
  • Halogen-Free
  • 100% RF Tested
  • -55°C to 85°C ROOM (25 °° °°C) Parameter Min. Typ. Max Unit Frequency 1500 1700 MHz Port Impedance 50 Ω Return Loss 21 25 dB Isolation 24 28 dB Insertion Loss* 0.2 0.3 dB Amplitude Balance 0.4 1.0 dB Phase Balance (relative to 90°) 0.7 4 Degrees Power Handling 4 Watts Operating Temperature ,55 +85 ºC Group Delay (1.5-1.7GHZ) (nSec) Min. Typ. Max 0.093 0.108 0.123 * Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC) Outline Drawing Top View (Nearside) 1.29±0.10 2.04±0.10 Orientation Marker Denotes Pin Location Side View 0.70±0.07 Bottom View (Farside) 2x 0.15 6x 0.98 4x 0.65 6x 0.30 6x 0.22 Orientation Marker Denotes Pin Location 4x 0.37 6 5 4 321 Configuration,1 Input GND Isolated Direct GND Coupled Pin Configuration,2 Isolated GND Input Coupled GND Direct Configuration,3 Direct GND Coupled Input GND Isolated Configuration,4 Coupled GND Direct Isolated GND Input Mechanical Outline ,Dimensions are in Millimeters ,Tolerances are Non,Cumulative

www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432,8909 (800) 411,6596 +44 2392,232392 +86 512,62749282 Model C1517J5003AHF Rev D Typical Broadband Performance: 500 MHz. to 6000 MHz. ,35 ,30 ,25 ,20 ,15 ,10 Return Loss at Input Port (dB) Freq [GHz] Return Loss at Input Port (dB) ,3.5 ,2.5 ,1.5 ,0.5 Insertion Loss (dB) Freq [GHz] Insertion Loss (dB) ,1.5 ,0.5 0.5 1.5 Amplitude Balance (dB) Freq [GHz] Amplitude Balance (dB) ,20 ,15 ,10 Phase balance(degree) Freq [GHz] Phase balance(degree) ,35 ,30 ,25 ,20 ,15 ,10 Isolation (dB) Freq [GHz] Isolation (dB)

www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432,8909 (800) 411,6596 +44 2392,232392 +86 512,62749282 Model C1517J5003AHF Rev D Typical Performance: 1400 MHz. to 1800 MHz. ,35 ,30 ,25 ,20 ,15 ,10 Return Loss at Input Port (dB) Freq [GHz] Return Loss at Input Port (dB) ,3.5 ,2.5 ,1.5 ,0.5 Insertion Loss (dB) Freq [GHz] Insertion Loss (dB) ,1.5 ,0.5 0.5 1.5 Amplitude Balance (dB) Freq [GHz] Amplitude Balance (dB) ,10 Phase balance(degree) Freq [GHz] Phase balance(degree) ,35 ,30 ,25 ,20 ,15 ,10 Isolation (dB) Freq [GHz] Isolation (dB)

www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432,8909 (800) 411,6596 +44 2392,232392 +86 512,62749282 Model C1517J5003AHF Rev D Definition of Measured Specifications *100% RF test is performed per spec definition for pin configuration 1 and port 1 (input port) is connected to pin1, port 2 (isolated port) is connected to pin 3, port 3 (direct port) is connected to pin 4 and port 4 (isolated) is connected to pin 6 . Parameter Definition Mathematical Representation i, j, k, m is denoted as the port index of input, isolated, d irect and coupled port for specific pin configuration shown in the table Return Loss The impedance match of the coupler to a 50 Ω system. Return Loss is an alternate means to express VSWR. 10 20log ( ) ii S Isolation The input power divided by the sum of the power at the two output ports. 10 20log ji S Insertion Loss The input power divided by the sum of the power at the two output ports. 2 2 10 10log ( ) mi ki S S + Amplitude Balance The difference in power between the two outputs. 10 20log ( ) ki mi S S Phase Balance The difference in phase angle between the two output ports. 90 o ki mi S S ∠ − ∠ + Group Delay Group delay is defined as the average of the mean group delay of the coupling path and the mean group delay of the direct path. Group delay (ns) = ( )( ) ( )( ) mi ki Mean GD S Mean GD S + where " " Mean is the arithmetic mean of the group delay over a frequency band.

www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432,8909 (800) 411,6596 +44 2392,232392 +86 512,62749282 Model C1517J5003AHF Rev D Mounting Configuration: In order for Xinger surface mount components to wor k optimally, the proper impedance transmission line s must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VS WR may not meet published specifications. All of the Xinger components are constructed from o rganic PTFE based composites which possess excellen t electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green st andards and ready for Pb,free soldering processes. Pads are Gold plated with a Nickel barrier. An example of the PCB footprint used in the testing of these parts is shown below. In specific design s, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. Mounting Footprint Dimensions are in Millimeters Plated thru holes to ground Circuit Pattern Footprint Pad (s) Solder Resist 4x Transmission Line 4x 0.30 6x 0.35 6x 0.33 6x 0.05 0.66

www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432,8909 (800) 411,6596 +44 2392,232392 +86 512,62749282 Model C1517J5003AHF Rev D Packaging and Ordering Information Parts are available in reel and are packaged per EIA 481,2. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. See Model Numbers below for further ordering information . 1.75 3.50 4.00 1.60 .81 8.00 4.00 2.00 .25 2.41