C14610B0101021

C146 AMPHENOL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 16

Technical content

Amphenol-Tuchel Electronics GmbH

2 Amphenol

These connectors are designed and produced in conformity with the low voltage directive (73/23/EWG) respectively Gerätesicherheitsgesetz (German law) and are especially in accordance with the standards DIN EN 61984 (VDE0627); IEC 60664-1 (VDE 0110-1) nad IEC 60529. The connectors may be used only within the technical ratings. The indicated dimensions with the panel cut-outs represent reference values and are in the concrete application with products to be co-ordinated. The Company It is the users responsability to check whether the components illustrated in this catalogue comply with different regulations from those stated in special fields of application which we are unable to foresee. We reserve the right to modify designs in order to improve quality, keep pace with technological advancement or meet particular requirements in production. This catalogue must not be used in any form or manner without our prior approval in writing (Copyright Law, Fair Trading Law, Civil Code).

C 146 D C 146 DD C 146 E C 146 EE C 146 M C 146 A 10 - 15 5 10 10 III -40 -20 -40 III 600 1,5 and 13 20 - 25 250 25 - 30 400 20 - 30 630 15 - 20 1000 25 - 30 250 20 - 30 1000 15 - 20 125V + 400V 25 - 30 250 100 200 III III 50 16 50 + 80 18 14 + 125 + 100 + 125 + 100 + 100 250400 Series Number of contacts Termination Contacts Wire gauge Flammability (UL 94) Certifications Insertion and withdrawal force in N Rated voltage (VDE) Rated voltage (UL, CSA) in V Pollution degree Installation (overvoltage) category Rated current (Tu=40°C) in A Lower temperature in °C Upper temperature in °C 63 250 400 630 1000 250 1000 125V + 400V250 Series Number of contacts Termination Wire gauge Flammability (UL 94) Certifications according DIN EN 175301-801 Insertion and withdrawal force in N Rated voltage (VDE) Rated voltage (UL, CSA) in V Pollution degree Installation (overvoltage) category Rated current (Tu=40°C) in A Lower temperature in °C Upper temperature in °C

4 Amphenol

1) For versions without wire protection please refer C146 main catalog or www. amphenol.info 2) For 48 pol version please refer C146 main catalog or www.amphenol.info Description - Figure Part No. Male insert Female insert Part No. Male insert Female insert C146 10A010 500 10 C146 10B010 500 10 Contact insert 10+PE C146 10A018 500 10 C146 10B018 500 10 Contact insert 18+PE C146 10A032 500 10 C146 10B032 500 10 Contact insert 32+PE C146 10A046 500 10 C146 10B046 500 10 Contact insert 46+PE Description - Figure Contact insert screw termination 6+PE Contact insert for stamped contacts 6+PE Contact insert for turned contacts 6+PE C146 10A006 102 1 1) (with wire protection)nn C146 10A006 000 1 C146 10A006 500 1 C146 10B006 000 1 C146 10B006 102 1 1) (with wire protection)nn C146 10B006 500 1 Description - Figure Part No. Male insert Female insert C146 10A010 102 1 1) (with wire protection)nn C146 10B010 102 1 1) (with wire protection)nn C146 10A010 000 1 C146 10B010 000 1 C146 10A010 500 1 C146 10B010 500 1 Part No. Male insert Female insert Contact insert screw termination 10+PE0+PE Contact insert for stamped contacts 10+PEE Contact insert for turned contacts 10+PE Description - Figure Contact insert screw termination 16+PE C146 10A016 102 1 1) (with wire protection)nn C146 10B016 102 1 1) (with wire protection)nn Contact insert for stamped contacts 16+PE C146 10A016 000 1 C146 10B016 000 1 C146 10A016 500 1 C146 10B016 500 1 Contact insert for turned contacts 16+PE C146 10A024 102 1 1) (with wire protection)nn C146 10B024 102 1 1) (with wire protection)nn Contact insert for stamped contacts 2) 24+PE C146 10A024 000 1 C146 10B024 000 1 C146 10A024 500 1 C146 10B024 500 1 Contact insert for turned contacts 2) 24+PE Contact insert screw termination 2) 24+PE

C 146 E / C 146 EE Contacts1) C 146 A Inserts Description - Figure Part No. Male insert Female insert Part No. Male insert Female insert C146 10A003 002 4 C146 10B003 002 4 Contact insert screw termination 3+PE C146 10A004 002 4 C146 10B004 002 4 Contact insert screw termination 4+PE C146 10A010 102 4 2) (with wire protection ) C146 10B010 102 4 2) (with wire protection ) Contact insert screw termination 10+PE C146 10A016 102 4 2) (with wire protection ) C146 10B016 102 4 2) (with wire protection ) Contact insert screw termination 16+PE 3) Description - Figure 2) For versions without wire protection please refer C146 main catalog or www. amphenol.info 3) For 32 pol versions please refer C146 main catalog or www.amphenol.info 4,0 mm2 12 100 VN01 025 0039 (1)C VN02 025 0039 (1)C Pieces Female contact 1,5 - 2,5 mm2 AWGfor wire gauge Male contact 0,5 - 1,5 mm2 20 - 16 100 10016 - 14 VN01 025 0001 (101) VN01 025 0010 (101) VN02 025 0001 (101) VN02 025 0010 (101) 0,5 - 1,5 mm2 0,5 mm2 0,75 - 1,0 mm2 1,5 mm2 2,5 mm2 20 - 16 16 - 14 200 100 20 - 16 16 - 14 2000 2000 2000 2000 20 - 16 16 - 14 20 100 100 100 14 100 ZN01 025 0001 (1) ZN01 025 0010 (1) ZN02 025 0001 (1) ZN02 025 0010 (1) HN02 025 0001 (1)HN01 025 0001 (1) HN01 025 0010 (1) HN02 025 0010 (1) TN02 025 0001 (1) TN02 025 0010 (1) TN01 025 0001 (1) TN01 025 0010 (1) VN01 025 0035 (1)C VN01 025 0036 (1)C VN01 025 0037 (1)C VN01 025 0038 (1)C VN02 025 0035 (1)C VN02 025 0036 (1)C VN02 025 0038 (1)C VN02 025 0037 (1)C Part No.Supplied as Stamped single contacts Stamped contacts on reel for hand crimp tools Stamped contacts on reel for crimp machines Contact feeding right hand side Contact feeding left hand side Turned crimp contacts Single contact 1,5 - 2,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 1) For gold plated contacts please refer C146 main catalog or www.amphenol.info

6 Amphenol

C146 P06 002 G8 (2 x PE) C146 S06 001 G8 C146 S06 002 G8 (2 x PE) Frame for 2 modules C146 P10 001 G8 C146 P10 002 G8 (2 x PE) C146 S10 001 G8 C146 S10 002 G8 (2 x PE) Frame for 3 modules A - C C146 P16 001 G8 C146 P16 002 G8 (2 x PE) C146 S16 001 G8 C146 S16 002 G8 (2 x PE) Frame for 5 modules A - E C146 P24 001 G8 C146 P24 002 G8 (2 x PE) C146 P24 101 G8 C146 P24 102 G8 (2 x PE) C146 S24 001 G8 C146 S24 002 G8 (2 x PE) C146 S24 101 G8 C146 S24 102 G8 (2 x PE) Frame for 7 modules A - G T - Z Description - Figure Part No. Frame for pin modules Frame for socket module A - B Positions 10 contacts for stamped contacts C146 D10 001 E8 C146 C10 001 G8 10 contacts for turned contacts C146 A10 001 E8 C146 B10 001 E8 Description - Figure Part No. pin module socket module Part No. silver plating 0,14 - 0,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 ZN01 016 0003 (1) ZN01 016 0002 (1) ZN01 016 0005 (1) ZN01 016 0015 (1) ZN01 016 0016 (1) 26-20 20-16 16-14 20-16 16-14 200 200 100 200 100 ZN02 016 0003 (1) ZN02 016 0002 (1) ZN02 016 0005 (1) ZN02 016 0015 (1) ZN02 016 0016 (1) Stamped contacts on reel for hand crimp tools Contact feeding left hand side 2) 0,14 - 0,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 TN01 016 0003 (1) TN01 016 0002 (1) TN01 016 0005 (1) TN01 016 0015 (1) TN01 016 0016 (1) 26-20 20-16 16-14 20-16 16-14 2000 2000 2000 2000 2000 TN02 016 0003 (1) TN02 016 0002 (1) TN02 016 0005 (1) TN02 016 0015 (1) TN02 016 0016 (1) Stamped contacts on reel for crimp machines silver plating 0,14 - 0,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 VN01 016 0003 (1) VN01 016 0002 (1) VN01 016 0005 (1) VN01 016 0015 (1) VN01 016 0016 (1) 26-20 20-16 16-14 20-16 16-14 100 100 100 100 100 VN02 016 0003 (1) VN02 016 0002 (1) VN02 016 0005 (1) VN02 016 0015 (1) VN02 016 0016 (1) Stamped single contacts silver plating Standard High current Standard High current Standard High current Single contact 0,14 - 0,37 mm2 0,5 mm2 0,75 - 1,0 mm2 1,5 mm2 2,5 mm2 VN01 016 0024 (1)C VN01 016 0025 (1)C VN01 016 0026 (1)C VN01 016 0027 (1)C VN01 016 0028 (1)C 26-22 20-16 16-15 100 100 100 100 100 VN02 016 0024 (1)C VN02 016 0025 (1)C VN02 016 0026 (1)C VN02 016 0027 (1)C VN02 016 0028 (1)C Male contacts Female contactsSupplied as for wire gauge AWG Pieces 20 contacts for stamped contacts C146 A20 001 G8 C146 B20 001 G8 0,09 - 0,25 mm2 0,25 - 0,50 mm2 0,09 - 0,25mm2 0,25 - 0,50 mm2 VN01 010 0130 (2) VN01 010 0131 (2) ZN01 010 0130 (2) ZN01 010 0131 (2) 28-24 24-2 0 28-24 24-2 0 100 100 500 500 VN02 010 0130 (2) VN02 010 0131 (2) ZN02 010 0130 (2) ZN02 010 0131 (2) Contact feeding left hand side 2) 0,09 - 0,25 mm2 0,25 - 0,50 mm2 TN01 010 0130 (2) TN01 010 0131 (2) 28-24 24-2 0 2000 2000 TN02 010 0130 (2) TN02 010 0131 (2) Contacts on reel for hand crimping tools Single contacts for hand crimping tools gold plating Contacts on reel for crimp machines Turned crimp contacts silver plating silver plating

Description - Figure Part No. pin module socket module C146 A05 001 E81) C146 B05 001 E81) 5 contacts for turned contacts Single contact 0,5 mm2 0,75 - 1,0 mm2 1,5 mm2 2,5 mm2 4,0 mm2 VN01 025 0029 (1)C VN01 025 0030 (1)C VN01 025 0031 (1)C VN01 025 0032 (1)C VN01 025 0033 (1)C 100 100 100 100 100 VN02 025 0029 (1)C VN02 025 0030 (1)C VN02 025 0031 (1)C VN02 025 0032 (1)C VN02 025 0033 (1)C Turned crimp contacts silver plating Male contacts Female contactsSupplied as for wire gauge AWG Pieces Single contact 1,5 mm2 2,5 mm2 4,0 mm2 6,0 mm2 10,0 mm2 VN01 036 0004 (1)C VN01 036 0005 (1)C VN01 036 0001 (1)C VN01 036 0002 (1)C VN01 036 0003 (1)C1) 100 100 100 100 100 VN02 036 0004 (1)C VN02 036 0005 (1)C VN02 036 0001 (1)C VN02 036 0002 (1)C VN02 036 0003 (1)C1) 3 contacts for turned contacts C146 A03 001 E8 C146 B03 001 E8 5 contacts for stamped contacts C146 D04 001 E8 (4 pol) C146 D05 001 E8 (4 + PE) C146 D05 801 E8 (5 pol) C146 C04 001 E8 (4 pol) C146 C05 001 E8 (4 + PE) C146 C05 801 E8 (5 pol) 3 contacts for coax contacts C146 A03 501 E8 C146 B03 501 E8 C146 A03 801 E8 C146 B03 801 E8 3 contacts for turned contacts 0,5 - 1,5 mm2 1,5 - 2,5 mm2 2,5 - 4,0 mm2 VN01 025 0001 (101) VN01 025 0010 (101) VN01 025 0043 (1) 20-16 16-14 100 100 100 VN02 025 0001 (101) VN02 025 0010 (101) VN02 025 0043 (1) 0,5 - 1,5 mm2 1,5 - 2,5 mm2 ZN01 025 0001 (1) ZN01 025 0010 (1) 20-16 16-14 200 100 ZN02 025 0001 (1) ZN02 025 0010 (1) 0,5 - 1,5 mm2 1,5 - 2,5 mm2 2,5 - 4,0 mm2 TN01 025 0001 (1) TN01 025 0010 (1) TN01 025 0043 (1) 20-16 16-14 2000 2000 2000 TN02 025 0001 (1) TN02 025 0010 (1) TN02 025 0043 (1) Contact feeding left hand side 2) RG 174, 179, 316 RG 58

17 DM 537 401

17 DM 537 405

Single contact 1,5 mm2 2,5 mm2 4,0 mm2 6,0 mm2 10,0 mm2 VN01 036 0004 (1) C VN01 036 0005 (1) C VN01 036 0001 (1) C VN01 036 0002 (1) C VN01 036 0003 (1) C 100 100 100 100 100 VN02 036 0004 (1) C VN02 036 0005 (1) C VN02 036 0001 (1) C VN02 036 0002 (1) C VN02 036 0003 (1) C RJ module C146 E12 001 E8 C146 F12 001 G8 Pneumatic module, 1 or 2 connections C146 G01 014 G8 (2,5 mm) C146 G01 024 G8 (4,0 mm) C146 G02 014 G8 (2,5 mm) C146 G02 024 G8 (4,0 mm) C146 H01 034 G8 (2,5 mm) C146 H01 044 G8 (4,0 mm) C146 H02 034 G8 (2,5 mm) C146 H02 044 G8 (4,0 mm) 0,14 - 0,37 mm2 0,5 mm2 0,75 - 1,0 mm2 1,5 mm2 2,5 mm2 VN01 016 0024 (1) C VN01 016 0025 (1) C VN01 016 0026 (1) C VN01 016 0027 (1) C VN01 016 0028 (1) C 26-22 20-16 16-15 100 100 100 100 100 VN02 016 0024 (1) C VN02 016 0025 (1) C VN02 016 0026 (1) C VN02 016 0027 (1) C VN02 016 0028 (1) C 1) For gold plated contacts please refer C146 main catalog or www.amphenol.info. 2) For right feeding contacts please refer C146 main catalog or www.amphenol.info. silver plating silver plating Contacts on reel for crimp machines Crimp contacts for cable size Contacts on reel for hand crimping tools Stamped single contacts Turned crimp contacts Turned crimp contacts Turned crimp contacts

8 Amphenol

Contacts4)C 146 D / C 146 DD C 146 DD Inserts Contact insert 7+PE C146 10A007 000 2 (for stamped crimp contacts) C146 10A007 500 2 (for turned crimp contacts) C146 10B007 000 2 for stamped crimp contacts) C146 10B007 500 2 (for turned crimp contacts) Contact insert 15+PE C146 10A015 000 2 for stamped crimp contacts) C146 10A015 500 2 (for turned crimp contacts) C146 10B015 000 2 (for stamped crimp contacts) C146 10B015 500 2 for turned crimp contacts) Contact insert 40+PE C146 10A040 000 2 for stamped crimp contacts) C146 10A040 500 2 (for turned crimp contacts) C146 10B040 000 2 for stamped crimp contacts) C146 10B040 500 2 (for turned crimp contacts) Description - Figure Part No. Male insert Female insert C146 10A008 000 2 (for stamped crimp contacts) C146 10A008 500 2 for turned crimp contacts) C146 10B008 000 2 (for stamped crimp contacts) C146 10B008 500 2 (for turned crimp contacts) C146 10A025 000 2 for stamped crimp contacts) C146 10A025 500 2 (for turned crimp contacts) C146 10B025 000 2 (for stamped crimp contacts) C146 10B025 500 2 (for turned crimp contacts) C146 10A064 000 2 (for stamped crimp contacts) C146 10A064 500 2 (for turned crimp contacts) C146 10B064 000 2 (for stamped crimp contacts) C146 10B064 500 2 (for turned crimp contacts) Part No. Male insert Female insert Contact insert 8 pol Contact insert 25+PE Contact insert 64+PE Description - Figure 1) For versions with two PE contacts please refer C146 main catalog or www.amphenol.info 2) For 50 pol versions please refer C146 main catalog or www.amphenol.info 3) For 128 pol versions please refer C146 main catalog or www.amphenol.info 4) For gold plated contacts please refer C146 main catalog or www.amphenol.info Pieces Female contact 0,5 - 1,5 mm2 AWGfor wire gauge Male contact 0,14 - 0,5 mm2 26 - 20 100 10020 - 16 VN01 016 0003 (1) VN01 016 0002 (1) VN02 016 0003 (1) VN02 016 0002 (1) 0,5 - 1,5 mm2 20 - 16 16 - 14 100 100 VN01 016 0005 (1) VN01 016 0015 (1) VN02 016 0015 (1) VN02 016 0016 (1) Part No. 1,5 - 2,5 mm2 Supplied as 1,5 - 2,5 mm2 16 - 14 100 VN01 016 0016 (1) VN02 016 0005 (1) Stamped single contacts Standard High current Description - Figure Part No. Male insert Female insert Part No. Male insert Female insert C146 10A024 000 9 (for turned crimp contacts) C146 10B024 000 9 (for turned crimp contacts) Contact insert 24+PE C146 10A042 000 9 (for turned crimp contacts) C146 10B042 000 9 for turned crimp contacts) Contact insert 42+PE C146 10A072 000 9 for turned crimp contacts) C146 10B072 000 9 for turned crimp contacts) Contact insert 72+PE C146 10A108 000 9 (for turned crimp contacts) C146 10B108 000 9 for turned crimp contacts) Contact insert 108+PE Description - Figure

0,5 - 1,5 mm2 AWGfor wire gauge Male contact 0,14 - 0,5 mm2 26 - 20 2000 200020 - 16 TN01 016 0003 (1) TN01 016 0002 (1) TN02 016 0003 (1) TN02 016 0002 (1) 0,5 - 1,5 mm2 20 - 16 16 - 14 2000 2000 26 - 20 20 - 16 200 100 200 100 16 - 14 20 - 16 TN01 016 0005 (1) TN01 016 0015 (1) TN02 016 0015 (1) TN02 016 0016 (1) ZN02 016 0002 (1) ZN01 016 0003 (1) ZN01 016 0002 (1) ZN02 016 0005 (1) ZN02 016 0015 (1) ZN02 016 0016 (1) ZN01 016 0005 (1) ZN01 016 0015 (1) Part No. 1,5 - 2,5 mm2 0,14 - 0,5 mm2 0,5 - 1,5 mm2 1,5 - 2,5 mm2 0,5 - 1,5 mm2 Supplied as 1,5 - 2,5 mm2 16 - 14 2 000 TN01 016 0016 (1) TN02 016 0005 (1) Stamped Contacts on reel for hand crimp machines Stamped Contacts on reel for hand crimp tools 1,5 - 2,5 mm2 16 - 14 200 ZN01 016 0016 (1) ZN02 016 0003 (1) Standard High current Contact feeding left hand side 26 - 22 20 100 100 100 100 20 - 16 16 - 15 VN02 016 0025 (1) VN01 016 0024 (1) VN01 016 0025 (1) VN02 016 0026 (1) VN02 016 0027 (1) VN02 016 0028 (1) VN01 016 0026 (1) VN01 016 0027 (1) 0,14 - 0,37 mm2 0,5 mm2 0,75 - 1,0 mm2 1,5 mm2 Turned crimp contacts 2,5 mm2 14 100 VN01 016 0028 (1) VN02 016 0024 (1)Single contact Standard High current Contacts1)C 146 D / C 146 DD Information: 1) All housings without stud 2) For d imensions please request drawings 3) bulkhead hous ings with cable outlets available upon request Materials Climatical Characteristics General Characteristics Degree of protection housing Degree of protection cover Locking System Standard Value IEC 60529 IEC 60529 IP68 IP68 2 screws Climatic category Temperature range Housing Protective cover Rubber gasket Locking screws Surface Aluminium die cast alloy Aluminium die cast alloy Conductive neoprene Stainless steel Special surface 40/100/21 -40°C/+100°C C 146 E 6 pol. C 146 M 2 Module C 146 DD 24 pol. C 146 EE 10 pol. C146 68R006 556 8 C146 68R006 656 8 C146 68F006 001 1 C146 68R010 506 8 C146 68R010 606 8 C146 68F010 001 1 C146 68R016 506 8 C146 68R016 606 8 C146 68F016 001 1 C146 68R024 507 8 C146 68R024 607 8 C146 68F024 001 1 M 25 C 146 E 10 pol. C 146 M 3 Module C 146 DD 42 pol. C 146 EE 18 pol. C 146 E 16 pol. C 146 E 5 Module C 146 DD 40 pol. C 146 DD 72 pol. C 146 DD 32 pol. C 146 E 24 pol. C 146 E 7 Module C 146 D 64 pol. C 146 DD 108 pol. C 146 EE 46 pol. 32M M Side entry Top entry Side entry Top entry Side entry Top entry IEC 60068 - 1 IEC 60068 - 1 1) For gold plated contacts please refer C146 main catalog or www.amphenol.info

10 Amphenol

Information: 1) PG housings with stud 2) Metric housings without stud 3) EMI housings are also available 4) For dimensions and panel cut outs please refer C146 main catalog and www.amphenol.inf o 5 ) For bulk head mounting housings with cable outlet, coupling housings and housings with cover please refer C146 main catalog and www.amphenol.info 6 ) Housings with more than one cable outlet are available upon request Materials Climatical Characteristics General Characteristics Degree of protection housing Degree of protection cover Locking System Standard Value IP65 IP65 locking lever Climatic category Temperature range Housing Protective cover Rubber gasket Locking lever Aluminium die cast alloy Aluminium die cast alloy NBR, CR steel/zinc coated 40/100/21 -40°C/+100°C IEC 60068-1 IEC 60068-1 C146 10G006 600 1 C146 10G006 601 1 C146 21R006 656 1 C146 21R006 606 1 C146 21R006 607 1 C146 10G006 656 8 C146 10G006 606 8 C146 10G006 607 8 C146 21R006 656 8 C146 21R006 606 8 PG M PG M PG M PG M PG M PG M Hood, top entry Hood, side entry Housing, bulkhead mountingg, Hood, top entry High profile Low profile Low profileLow profileHigh profile High profile 13,5 60,0 60,0 60,0 60,0 60,0 60,0 60,0 60,0 60,0 60,0 51,0 51,0 51,0 51,0 51,0 70,0 70,0 70,0 70,0 70,0 C146 10G010 600 1 C146 10G010 601 1 C146 21R010 650 1 C146 21R010 600 1 C146 10G010 650 8 C146 10G010 600 8 C146 10G010 601 8 C146 21R010 650 8 C146 21R010 600 8 C146 21R010 601 8 C146 10G010 500 1 C146 10G010 501 1 C146 21R010 550 1 C146 21R010 500 1 C146 10G010 550 8 C146 10G010 500 8 C146 10G010 501 8 C146 21R010 550 8 C146 21R010 500 8 C146 10F010 000 1 C146 10G010 601 1 C146 10G010 607 1 C146 21R010 656 1 C146 21R010 606 1 C146 21R010 607 1 C146 10G010 606 8 C146 10G010 607 8 C146 21R010 656 8 C146 21R010 606 8 C146 21R010 607 8 73,0 73,0 73,0 73,0 73,0 73,0 73,0 73,0 73,0 73,0 73,0 73,0 73,0 73,0 73,0 73,0 73,0 93,0 73,0 73,0 73,0 73,0 73,0 73,0 73,0 73,0 73,0 73,0 C146 10G016 600 1 C146 10G016 601 1 C146 21R016 650 1 C146 21R016 600 1 C146 10G016 600 8 C146 10G016 601 8 C146 21R016 650 8 C146 21R016 600 8 C146 21R016 601 8 C146 10G016 500 1 C146 10G016 501 1 C146 21R016 550 1 C146 21R016 500 1 C146 10G016 500 8 C146 10G016 501 8 C146 21R016 550 8 C146 21R016 500 8 C146 21R016 501 8 C146 10F016 000 1 C146 10G016 606 1 C146 10G016 607 1 C146 21R016 656 1 C146 21R016 606 1 C146 10G016 606 8 C146 10G016 607 8 C146 21R016 656 8 C146 21R016 606 8 C146 21R016 607 8 93,5 93,5 93,5 93,5 93,5 93,5 93,5 93,5 93,5 93,5 93,5 93,5 93,5 93,5 93,5 93,5 93,5 93,5 113,0 93,5 93,5 93,5 93,5 93,5 93,5 93,5 93,5 93,5 C146 10G024 600 1 C146 10G024 601 1 C146 21R024 650 1 C146 21R024 600 1 C146 10G024 600 8 C146 10G024 601 8 C146 21R024 650 8 C146 21R024 600 8 C146 21R024 601 8 C146 10G024 500 1 C146 10G024 501 1 C146 21R024 550 1 C146 21R024 500 1 C146 10G024 500 8 C146 10G024 501 8 C146 21R024 550 8 C146 21R024 500 8 C146 21R024 501 8 C146 10F024 000 1 C146 10G024 606 1 C146 10G024 607 1 C146 21R024 656 1 C146 21R024 606 1 C146 10G024 606 8 C146 10G024 607 8 C146 21R024 656 8 C146 21R024 606 8 C146 21R024 607 8 C 146 E 16 pol. C 146 M 5 Module C 146 D 40 pol. C 146 DD 72 pol. C 146 HSE 6pol. C 146 EE 32 pol. C 146 E 6 pol. C 146 M 2 Module C 146 DD 24 pol. C 146 EE 10 pol. C 146 E 10 pol. C 146 M 3 Module C 146 DD 42 pol. C 146 HvE 3 pol. C 146 EE 18 pol. C 146 E 24 pol. C 146 M 7 Module C 146 D 64 pol. C 146 DD 108 pol. C 146 HvE 10 pol. C 146 EE 46 pol. lenght in mm width in mm height in mm lenght in mm width in mm height in mm lenght in mm width in mm height in mm lenght in mm width in mm height in mm 51,0 51,0 51,0 51,0 70,0 70,0 70,0 70,0 70,0 70,0 51,0 51,0 51,0 51,0 70,0 70,0 70,0 70,0 70,0 28,5 51,0 51,0 51,0 51,0 51,0 70,0 70,0 70,0 70,0 70,0 62,0 62,0 62,0 62,0 76,0 76,0 76,0 76,0 76,0 62,0 62,0 62,0 62,0 76,0 76,0 76,0 76,0 76,0 28,5 62,0 62,0 62,0 62,0 76,0 76,0 76,0 76,0 76,0 62,0 62,0 62,0 62,0 76,0 76,0 76,0 76,0 76,0 62,0 62,0 62,0 62,0 76,0 76,0 76,0 76,0 76,0 28,5 62,0 62,0 62,0 62,0 76,0 76,0 76,0 76,0 76,0 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 140 120 120 120 120 120 120 120 120 120 LBH LBH LBH LBH IEC 60529 IEC 60529

Hood, top entry Hood, side entry Housing, bulkhead mounting Low profileHigh profile C 146 D 50 pol. C 146 A 32 pol. C 146 D 15 pol. C 146 A 10 pol. C146 D 25 pol. C146 A 16 pol. lenght in mm width in mm height in mm lenght in mm width in mm height in mm lenght in mm width in mm height in mm Low profileHigh profile PG M PG M PG M PG M 13,5 13,5 C146 10G010 600 4 C146 10G010 601 4 C146 21R010 650 4 C146 21R 010 600 4 C146 10G015 601 2 C146 10G015 600 2 C146 21R015 650 2 C146 21R015 600 2 C146 10G010 501 4 C146 10G010 500 4 C146 21R010 550 4 C146 21R010 500 4 C146 10G015 501 2 C146 10G015 500 2 C146 21R015 550 2 C146 21R015 500 2 C146 10F015 000 2 62,5 62,5 62,5 62,5 62,5 62,5 62,5 62,5 62,5 62,5 62,5 62,5 62,5 62,5 62,5 81,0 29,5 29,5 29,5 29,5 29,5 29,5 29,5 29,5 29,5 29,5 29,5 29,5 29,5 29,5 29,5 29,5 29,5 53,0 53,0 53,0 53,0 64,5 64,5 64,5 64,5 53,0 53,0 53,0 53,0 64,5 64,5 64,5 64,5 26,0 C146 10G016 600 4 C146 21R016 650 4 C146 21R016 600 4 C146 10G025 601 2 C146 10G025 600 2 C146 21R025 650 2 C146 21R025 600 2 C146 10G016 501 4 C146 10G016 500 4 C146 21R016 550 4 C146 21R016 500 4 C146 10G025 501 2 C146 10G025 500 2 C146 21R015 550 2 C146 21R015 500 2 C146 10F025 000 2 79, 79,0 79,0 79,0 79,0 79,0 79,0 79,0 79,0 79,0 79,0 79,0 79,0 79,0 79,0 96,0 29,5 29,5 29,5 29,5 29,5 29,5 29,5 29,5 29,5 29,5 29,5 29,5 29,5 29,5 29,5 29,5 58,0 58,0 58,0 70,5 70,5 70,5 70,5 58,0 58,0 58,0 58,0 70,5 70,5 70,5 70,5 26,0 82,0 82,0 82,0 82,0 82,0 82,0 82,0 82,0 82,0 82,0 102,0 102,0 75,0 75,0 75,0 75,0 75,0 75,0 75,0 75,0 75,0 75,0 26,0 26,0 C146 10G032 600 4 C146 10G032 601 4 C146 21R032 650 4 C146 21R032 600 4 C146 21R032 601 4 C146 10G032 500 4 C146 10G032 501 4 C146 21R032 550 4 C146 21R032 500 4 C146 21R032 501 4 C146 10F032 000 4 C146 10F032 000 4 PG M PG M LBH LBH LBH C 146 E 16 pol. C 146 M 5 Module C 146 D 40 pol. C 146 DD 72 pol. C 146 HSE 6pol. C 146 EE 32 pol. C 146 E 6 pol. C 146 M 2 Module C 146 DD 24 pol. C 146 EE 10 pol. C 146 E 10 pol. C 146 M 3 Module C 146 DD 42 pol. C 146 HvE 3 pol. C 146 EE 18 pol. C 146 E 24 pol. C 146 M 7 Module C 146 D 64 pol. C 146 DD 108 pol. C 146 HvE 10 pol. C 146 EE 46 pol. lenght in mm width in mm height in mm lenght in mm width in mm height in mm lenght in mm width in mm height in mm lenght in mm width in mm height in mm C146 10G006 500 1 C146 10G006 501 1 C146 21R006 506 1 C146 21R006 507 1 C146 10G006 556 8 C146 10G006 506 8 C146 10G006 507 8 C146 21R006 556 8 C146 21R006 506 8 C146 10F006 000 1 PG M PG M Hood, side entry Housing,bulkhead Low profileHigh profile 13,5 60,0 60,0 60,0 60,0 60,0 60,0 60,0 60,0 60,0 80,0 C146 10G010 506 1 C146 10G010 507 1 C146 21R010 556 1 C146 21R010 506 1 C146 10G010 506 8 C146 10G010 507 8 C146 21R010 556 8 C146 21R010 506 8 C146 10F010 001 1 73,0 73,0 73,0 73,0 73,0 73,0 73,0 73,0 93,0 51,0 51,0 51,0 51,0 70,0 70,0 70,0 70,0 28,5 C146 10G016 506 1 C146 10G016 507 1 C146 21R016 556 1 C146 21R016 506 1 C146 10G016 506 8 C146 10G016 507 8 C146 21R016 556 8 C146 21R016 506 8 C146 21R016 507 8 C146 10F016 001 1 93,5 93,5 93,5 93,5 93,5 93,5 93,5 93,5 93,5 113,0 62,0 62,0 62,0 62,0 76,0 76,0 76,0 76,0 76,0 28,5 C146 10G024 506 1 C146 10G024 507 1 C146 21R024 556 1 C146 21R024 506 1 C146 10G024 506 8 C146 10G024 507 8 C146 21R024 556 8 C146 21R024 506 8 C146 21R024 507 8 C146 10F024 001 1 120 120 120 120 120 120 120 120 120 140 62,0 62,0 62,0 62,0 76,0 76,0 76,0 76,0 76,0 28,5 LBH LBH LBH LBH 51,0 51,0 51,0 51,0 51,0 51,0 51,0 51,0 51,0 51,0 Hood, side entry Housing bulkhead mounting (incl. gasket) Housing bulkhead end mountin (incl. gas Hood, top entry PG M PG M C146 10G003 600 4 C146 10R003 600 4 (gray) C146 16R003 600 4 (bl) C146 10G003 500 4 C146 10R003 500 4 (gray) C146 16R003 500 4 (bl) C 146 D 7 pol. C 146 A 3/4 pol. lenght in mm width in mm height in mm 26,5 26,5 26,5 26,5 26,5 26,5 33,5 33,5 33,5 33,5 33,5 33,5 50,0 50,0 50,0 48,0 48,0 48,0 C 146 D 7 pol. C 146 A 3/4 pol. C146 10F003 000 4 (gray) C146 16F003 000 4 (bl) C146 10F003 004 4 40,0 40,0 40,0 28,0 28,0 27,8 22,0 22,0 26,0 LB H lenght in mm width in mm height in mm LBH Information: 1) PG housings with stud 2) Metric housings without stud 3) EMI housings are also available 4) For dimensions and panel cut outs please refer C146 main catalog and www.amphenol.info 5) For bulk head mounting housings with cable outlet, coupling housings and housings with cover please refer C146 main catalog and www.amphenol.info 6) Housings with more than one cable outlet are available upon request

12 Amphenol

6 POL

10 POL

16 POL

p a n e l p a n e l p a n e l C146 10G006 501 1 C146 10A006 102 1 VN16 160 0014 C146 10G006 601 1 C146 10A006 102 1 VN16 160 0014 C146 10G006 506 8 C146 10A006 102 1 VN16 160 0014 C146 10G006 606 8 C146 10A006 102 1 VN16 160 0014 C146 10F006 000 1 C146 10B006 102 1 C146 10F006 003 1 C146 10B006 102 1 C146 10G010 506 1 C146 10A010 102 1 VN16 160 0014 C146 10G010 606 1 C146 10A010 102 1 VN16 160 0014 C146 10G010 607 1 C146 10A010 102 1 VN16 160 0014 C146 10G010 507 1 C146 10A010 102 1 VN16 160 0014 C146 10F010 001 1 C146 10B010 102 1 C146 10F010 003 1 C146 10B010 102 1 C146 10G016 506 1 C146 10A016 102 1 VN16 160 0014 C146 10G016 606 1 C146 10A016 102 1 VN16 160 0014 C146 10F016 001 1 C146 10B016 102 1 C146 10F016 003 1 C146 10B016 102 1 side low top low side high top high no yes side low top low top low side low no yes side low top low no yes Kits consist of insert with contacts, housing and gland bushing for housings with cable outlet No. of Pos. Part No. Component parts Cable entry Hood profile Spring cover PG Screw Termination

24 POL

p a n e l side high top high side low top low side high top high side low top low side high top high side low top low side low side high top high top low no no yes Kits consist of insert with contacts, housing and gland bushing for housings with cable outlet No. of Pos. Part No. Component parts Cable entry Hood profile Spring cover PG C146 10E024 943 8 C146 10E024 944 8 C146 10E024 945 1 C146 10E024 946 1 C146 10E024 947 8 C146 10E024 948 8 C146 10E024 949 1 C146 10E024 950 1 C146 10E024 951 8 C146 10E024 952 8 C146 10E024 953 1 C146 10E024 954 1 C146 10E024 955 1 C146 10E024 956 8 C146 10E024 957 8 C146 10E024 958 1 C146 10E024 940 1 C146 10E024 941 1 C146 10E024 942 1 C146 10G024 500 C146 10A024 102 1 VN16 210 0014 C146 10G024 600 8 C146 10A024 102 1 VN16 210 0014 C146 10G024 500 1 C146 10A024 102 1 VN16 210 0014 C146 10G024 600 1 C146 10A024 102 1 VN16 210 0014 C146 10G024 506 8 C146 10A024 102 1 VN16 210 0014 C146 10G024 606 8 C146 10A024 102 1 VN16 210 0014 C146 10G024 506 1 C146 10A024 102 1 VN16 210 0014 C146 10G024 606 1 C146 10A024 102 1 VN16 210 0014 C146 10G024 501 8 C146 10A024 102 1 VN16 210 0014 C146 10G024 601 8 C146 10A024 102 1 VN16 210 0014 C146 10G024 501 1 C146 10A024 102 1 VN16 210 0014 C146 10G024 601 1 C146 10A024 102 1 VN16 210 0014 C146 10G024 507 1 C146 10A024 102 1 VN16 210 0014 C146 10G024 507 8 C146 10A024 102 1 VN16 210 0014 C146 10G024 607 8 C146 10A024 102 1 VN16 210 0014 C146 10G024 607 1 C146 10A024 102 1 VN16 210 0014 C146 10F024 000 1 C146 10B024 102 1 C146 10F024 001 1 C146 10B024 102 1 C146 10F024 003 1 C146 10B024 102 1 Screw Termination

14 Amphenol

vibration protection IP 67 Gland bushing EMC IP 68 Clamping range Ø Clamping range Ø A (mm) PG PG M M Pieces Pieces Part No. Part No. 4 - 10 mm 4 - 10 mm 5 - 12 mm 6 - 12 mm 9 - 14 mm 9 - 16 mm 13 - 18 mm 0 - 21 mm 14 - 25 mm 16 - 28 mm 4 - 10 mm 5,5 - 10 m m 5 - 12 mm 8 - 13 mm 8 - 14 mm 11 - 18 mm 11 - 17,5 mm 15 - 21 mm 16 - 25 mm 19 - 27 mm VN16 110 0027 X VN16 160 0127 X VN16 135 0027 X VN16 200 0127 X VN16 160 0027 X VN16 250 0127 X VN16 210 0027 X VN16 320 0127 X VN16 290 0027 X VN16 400 0127 X VN16 110 0026 X VN16 160 0126 X VN16 135 0026 X VN16 200 0126 X VN16 160 0026 X VN16 250 0126 X VN16 210 0026 X VN16 320 0126 X VN16 290 0026 X VN16 400 0126 X 26,5 29,5 36,2 43,6 13,5 13,5 Gland bushings Gland bushings IP 65 Drawing PG M Pieces Part No. VN16 110 0014 X (Thermoplast) VN16 200 0114 X (Thermoplast) VN16 135 0014 X VN16 160 0014 X VN16 200 0114 X VN16 210 0014 X VN16 250 0114 X VN16 290 0014 X VN16 320 0114 X VN16 360 0014 X VN16 400 0114 X VN16 420 0014 X VN16 500 0114 X VN16 110 0013 X (Thermoplast) VN16 135 0013 X VN16 160 0013 X VN16 210 0013 X VN16 290 0013 X VN16 360 0013 X VN16 420 0013 X 13,5 13,5 Metal, with standard diameter

Crimping tools for stamped contacts Hand crimping tool for turned contacts Removal tool for contacts incl. contact locator and calibration pin 4-Indent hand crimping tool for turned contacts Service crimping tool Crimping fool for single contacts

Description

Contact Ø Crimping dies for wire gauge Tools Part No. Part No. 0,14 - 0,5 mm2 0,5 - 1,5 mm2 0,14 - 0,5 m m2 0,5 - 1,5 mm 2 1,5 - 2,5 mm 2 1,0 mm 1,6 mm 2,5 mm (w iht cl ip) 2,5 mm (wihtout cl ip) 3,6 mm (wiht clip ) 3,6 mm (w ihtout cl ip) 1,6 mm LWL 0,10 - 0 ,5 mm2 0,14 - 2,5 mm2 0,5 - 4 mm2 0,5 - 4 m m2 1,5 - 10 mm2 1,5 - 10 mm2 TB 0300 146 TB 0400 146 TB 0100 146 TB 0600 146 TB 0200 146 TB 0100 148 TB 0500 146 TA 0001 146 000 1 TA 0002 146 000 1 TA 0007 146 000 3 TA 0000 202 TA 0000 163 TA 0000 141 FG 0300 146 1 TA 0100 146 TA 0000 TA 05001) Further information see catalogue „Tools “