C106 DIGITRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
144 Market Street
phone +1.908.245-7200 fax +1.908.245-0555 sales@digitroncorp.com www.digitroncorp.com Rev. 20130118 C106 SERIES SILICON CONTROLLED RECTIFIER Available Non-RoHS (standard) or RoHS compliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. MAXIMUM RATINGS Rating Symbol Value Unit Peak repetitive forward and reverse blocking voltage(1) (RGK = 1kΩ, TJ = -40 to +110°C) C106Q C106Y C106F C106A C106B C106C C106D C106E C106M V RRM, VDRM 100 200 300 400 500 600 Volts Forward current RMS (all conduction angles) IT(RMS) 4 Amps Average forward current (TA = 30°C) IT(AV) 2.55 Amps Peak non-repetitive surge current (1/2 cycle, 60Hz, T J = -40 to +110°C) ITSM
20 Amps
Circuit fusing considerations (t = 8.3ms) I
1.65 A2s
Peak gate power PGM 0.5 Watts Average gate power PG(AV) 0.1 Watts Forward peak gate current IGFM 0.2 Amps Peak reverse gate voltage VGRM 6 Volts Operating junction temperature range TJ -40 to +110 °C Storage temperature range Tstg -40 to +150 °C Mounting torque(2) 6 In. lb. Note 1: VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. Note 2: Torque rating applies with use of compression washer. Mounting torque in excess of 6 in. lb. does not appreciably lower case-to-sink thermal resistance. Anode lead and heatsink contact pad are common. Soldering temperature shall not exceed 200°C. For optimum results, an activated flux is recommended. THERMAL CHARACTERISTICS Characteristic Symbol Maximum Unit Thermal resistance, junction to case RӨJC 3 °C/W Thermal resistance, junction to ambient RӨJA 75 °C/W ELECTRICAL CHARACTERISTICS (TC = 25°C) Characteristic Symbol Min. Typ. Max. Unit Peak forward or reverse blocking current AK = rated VDRM or VRRM, RGK = 1kΩ) TJ = 25°C TJ = 110°C IDRM, IRRM 100 µA Forward “on” voltage FM = 1A peak) VTM
2.2 Volts
Gate trigger current (continuous dc) AK = 6Vdc, RL = 100Ω) (VAK = 6Vdc, RL = 100Ω, TC = -40°C) IGT 200 500 µA Gate trigger voltage (continuous dc) AK = 6Vdc, RL = 100Ω) (VAK = 6Vdc, RL = 100Ω, TC = -40°C) VGT 0.4 0.5 0.60 0.75 0.8 1.0 Volts
phone +1.908.245-7200 C106 SERIES SILICON CONTROLLED RECTIFIER Characteristic Symbol Min. Typ. Max. Unit Holding current (VD = 12Vdc, RGK = 1kΩ) TJ = 25°C TJ = -40°C TJ = 110°C IH 0.3 0.4 0.14 mA Forward voltage application rate J = 110°C, RGK = 1000Ω, VD = rated VDRM) dv/dt - V/µs Turn-on time tgt - 1.2 - µs Turn-off time tq - 40 - µs MECHANICAL CHARACTERISTICS Case TO-126 Marking Body painted, alpha-numeric Pin out See below TO-126 Inches Millimeters Min Max Min Max A 0.425 0.435 10.80 11.050 B 0.295 0.305 7.490 7.750 C 0.095 0.105 2.410 2.670 D 0.020 0.026 0.510 0.660 F 0.115 0.125 2.920 3.180 G 0.091 0.097 2.310 2.460 H 0.050 0.095 1.270 2.410 J 0.015 0.025 0.380 0.640 K 0.595 0.655 15.110 16.640 M 3° TYP 3° TYP Q 0.148 0.158 3.760 4.010 R 0.045 0.055 1.140 1.400 S 0.025 0.035 0.640 0.890 U 0.145 0.155 3.680 3.940 V 0.040 - 1.020 - fax +1.908.245-0555 sales@digitroncorp.com www.digitroncorp.com Rev. 20130118
phone +1.908.245-7200 C106 SERIES SILICON CONTROLLED RECTIFIER fax +1.908.245-0555 sales@digitroncorp.com www.digitroncorp.com Rev. 20130118