C106 MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

1Motorola Thyristor Device Data /C0083/C0105/C0108/C0105/C0099/C0111/C0110 /C0067/C0111/C0110/C0116/C0114/C0111/C0108/C0108/C0101/C0100 /C0082/C0101/C0099/C0116/C0105/C0102/C0105/C0101/C0114 Reverse Blocking Triode Thyristors . . . Glassivated PNPN devices designed for high volume consumer applications such as temperature, light, and speed control; process and remote control, and warning systems where reliability of operation is important.

  • Glassivated Surface for Reliability and Uniformity
  • Power Rated at Economical Prices
  • Practical Level Triggering and Holding Characteristics
  • Flat, Rugged, Thermopad Construction for Low Thermal Resistance, High Heat Dissipation and Durability MAXIMUM RATINGS (TJ = 25°C unless otherwise noted.) Rating Symbol Value Unit Peak Repetitive Forward and Reverse Blocking Voltage(1) (RGK = 1 kΩ ) C106F (TC = –40° to 110°C) C106A C106B C106D C106M VDRM or VRRM 100 200 400 600 Volts RMS Forward Current (All Conduction Angles) IT(RMS) 4 Amps Average Forward Current (TA = 30°C) IT(AV) 2.55 Amps Peak Non-repetitive Surge Current (1/2 Cycle, 60 Hz, TJ = –40 to +110°C) ITSM 20 Amps Circuit Fusing (t = 8.3 ms) I2t 1.65 A2s Peak Gate Power PGM 0.5 Watt Average Gate Power PG(AV) 0.1 Watt Peak Forward Gate Current IGFM 0.2 Amp 1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, (cont.) positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. Preferred devices are Motorola recommended choices for future use and best overall value. Order this document by C106/D /C0077/C0079/C0084/C0079/C0082/C0079/C0076/C0065 SEMICONDUCTOR TECHNICAL DATA  Motorola, Inc. 1995 /C0067/C0049/C0048/C0054 /C0083/C0101/C0114/C0105/C0101/C0115 CASE 77-08 (TO-225AA) STYLE 2 SCRs

4 AMPERES RMS

G KAG A *Motorola preferred devices /C0042

/C0067/C0049/C0048/C0054 /C0083/C0101/C0114/C0105/C0101/C0115

2 Motorola Thyristor Device Data

MAXIMUM RATINGS — continued Rating Symbol Value Unit Peak Reverse Gate Voltage VGRM 6 Volts Operating Junction T emperature Range TJ –40 to +110 °C Storage Temperature Range Tstg –40 to +150 °C Mounting T orque(1) — 6 in. lb. 1. Torque rating applies with use of compression washer (B52200F006). Mounting torque in excess of 6 in. lb. does not appreciably lower case-to-sink thermal resistance. Anode lead and heatsink contact pad are common. For soldering purposes (either terminal connection or device mounting), soldering temperatures shall not exceed +200°C. For optimum results, an activated flux (oxide removing) is recommended. THERMAL CHARACTERISTICS (TC = 25°C, RGK = 1 kΩ unless otherwise noted.) Characteristic Symbol Max Unit Thermal Resistance, Junction to Case R θJC 3 °C/W Thermal Resistance, Junction to Ambient R θJA 75 °C/W ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted.) Characteristic Symbol Min Typ Max Unit Peak Forward or Reverse Blocking Current (VAK = Rated VDRM or VRRM , RGK = 1000 Ohms) TJ = 25°C TJ = 110°C IDRM , IRRM 100 µA µA Forward “On” Voltage (IFM = 1 A Peak) VTM — — 2.2 Volts Gate Trigger Current (Continuous dc) (VAK = 6 Vdc, RL = 100 Ohms) (VAK = 6 Vdc, RL = 100 Ohms, TC = –40°C) IGT 200 500 µA Gate Trigger Voltage (Continuous dc) (VAK = 6 Vdc, RL = 100 Ohms, RGK = 1000 Ohms) TJ = 25°C (VAK = Rated VDRM , RL = 3000 Ohms, R GK = 1000 Ohms, TJ = 110°C) T J = –40°C VGT 0.4 0.5 0.2 0.8 Volts Holding Current T J = 25°C (VD = 12 Vdc, RGK = 1000 Ohms) T J = –40°C TJ = +110°C IHX 0.3 0.4 0.14 mA Forward Voltage Application Rate (TJ = 110°C, RGK = 1000 Ohms, VD = Rated VDRM ) dv/dt — 8 — V/µs Turn-On Time tgt — 1.2 — µs Turn-Off Time tq — 40 — µs DC DC JUNCTION TEMPERATURE ≈ 110°C 100 110 3.6 4.0 IT(AV) AVERAGE ON-STATE CURRENT (AMPERES) HALF SINE WAVE RESISTIVE OR INDUCTIVE LOAD. 50 to 400 Hz FIGURE 1 – AVERAGE CURRENT DERATING 2.8 FIGURE 2 – MAXIMUM ON-STATE POWER DISSIPATION IT(AV) AVERAGE ON-STATE CURRENT (AMPERES) HALF SINE WAVE RESISTIVE OR INDUCTIVE LOAD 50 TO 400Hz. C °T , CASE TEMPERATURE ( C) P , AVERAGE ON-ST ATE POWER DISSIP ATION (WATTS)(AV)

/C0067/C0049/C0048/C0054 /C0083/C0101/C0114/C0105/C0101/C0115 3Motorola Thyristor Device Data Package Interchangeability The dimensional diagrams below compar e the critical dimensions of the Motorola C-106 package with competitive devices. It has been demonstrated that the smaller dimensions of the Motorola package m ake it compatible in m ost lead-moun t and chassis-mount applications. The user is advised to compare all critical dimensions for mounting compatibility. Motorola C-106 Package Competitive C-106 Package .315____ .285 .105____ .095 .054____ .046 .420____ .400 .400____ .360 .385____ .365 .135____ .115 .520____ .480 .127____ .123 DIA .105____ .095 .190____ .170 .026____ .019 .025____ .035 .295____ .305 .148____ .158 .115____ .130 /C0095 .015____ .025 .050____ .095 .145____ .155 5 TYP.425____ .435 .575____ .655 .020____ .026 1 2 3 .045____ .055 .095____ .105 .040 .094 BSC

/C0067/C0049/C0048/C0054 /C0083/C0101/C0114/C0105/C0101/C0115

4 Motorola Thyristor Device Data

NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. STYLE 2: PIN 1. CATHODE 2. ANODE 3. GATE –B– –A– M K F C Q H V G S D J R U 1 32 2 PL MAM0.25 (0.010) B M MAM0.25 (0.010) B M DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.425 0.435 10.80 11.04 B 0.295 0.305 7.50 7.74 C 0.095 0.105 2.42 2.66 D 0.020 0.026 0.51 0.66 F 0.115 0.130 2.93 3.30 G 0.094 BSC 2.39 BSC H 0.050 0.095 1.27 2.41 J 0.015 0.025 0.39 0.63 K 0.575 0.655 14.61 16.63 M 5 TYP 5 TYP Q 0.148 0.158 3.76 4.01 R 0.045 0.055 1.15 1.39 S 0.025 0.035 0.64 0.88 U 0.145 0.155 3.69 3.93 /C0095 /C0095 CASE 77–08 (TO–225AA) Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Literature Distribution Centers: USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England. JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan. C106/D /C0042/C0067/C0049/C0048/C0054/C0047/C0068/C0042