C106

C106 LITTELFUSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 5

Technical content

Features

Glassivated PNPN devices designed for high volume consumer applications such as temperature, light, and speed control; process and remote control, and warning systems where reliability of operation is important.

Description

K,1 G,3 A,2 TO-225A A Case 77 Style 2 3 2 1

© 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/11/20 Thyristors Surface Mount > 200 - 600V > C106 Series Rating Symbol Value Unit Peak Repetitive Off−State Voltage (Sine Wave, 50−60 Hz, RGK = 1 K, TC = −40° to 110°C) C106B C106D, C106D1* C106M VDRM, VRRM 200 400 600 V On-State RMS Current (180° Conduction Angles, TC = 80°C) IT (RMS) 4.0 A Average On−State Current (180° Conduction Angles, TC = 80°C) IT(AV) 2.55 A Peak Non-Repetitive Surge Current (1/2 Cycle, Sine Wave, 60 Hz, TJ = +25°C) ITSM 20 A Circuit Fusing Considerations (t = 8.3 ms) I2t 1 .65 A2s Forward Peak Gate Current (Pulse Width 1 .0 sec, TC = 80°C) IGM 0.2 A Forward Peak Gate Power (Pulse Width ≤ 1 .0 µsec, TC = 80°C) PGM 0.5 W Forward Average Gate Power (Pulse Width ≤ 1 .0 µsec, TC = 80°C) PG(AV) 0.1 W Operating Junction Temperature Range TJ -40 to +110 °C Storage Temperature Range Tstg -40 to +150 °C Mounting Torque (Note 2) _ 6.0 in. lb. Maximum Ratings (TJ = 25°C unless otherwise noted) Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. are common. Thermal Characteristics Rating Symbol Value Unit Thermal Resistance, Junction−to−Case (AC) Junction−to−Ambient RƟJC RƟJA 3.0 75 °C/W Maximum Lead Temperature for Soldering Purposes, 1/8” from case for 10 seconds TL 260 °C Electrical Characteristics - OFF (TJ = 25°C unless otherwise noted) Electrical Characteristics - ON (TJ = 25°C unless otherwise noted) Characteristic Symbol Min Ty p Max Unit Peak Repetitive Forward or Reverse Blocking Current (VAK = Rated VDRM or VRRM, RGK = 1 Ωk) TJ = 25°C IDRM, IRRM _ _ 10 μA TJ = 110°C – – 100 µA Characteristic Symbol Min Ty p Max Unit Peak Forward On-State Voltage (Note 3) (ITM = 4 A) VTM – – 2.2 V Gate Trigger Current (Continuous dc) (VD = 12 V , RL = 100 Ω, All Quadrants) TJ = 25°C IGT _ 15 200 µA TJ = -40°C – 35 500 Peak Reverse Gate Voltage (IGR = 10 µA) VGRM – – 6.0 V Gate Trigger Voltage (Continuous dc) (VD = 12 Vdc, RL = 100 Ω, TC = 25°C) TJ = 25°C VGT 0.4 0.60 0.8 V TJ = -40°C 0.5 0.75 1. 0 Gate Non−Trigger Voltage (Continuous dc) (Note 4) (VAK = 12 V , RL = 100 (VAK = 12 V , RL = 100 , TJ = 110°C), TJ = 110°C) VGD 0.2 _ _ V Latching Current (VAK = 12 V , IG = 20 mA, RGK = 1 kΩ) TJ = 25°C IL _ 0.20 5.0 mA Holding Current (VD = 12 Vdc) (Initiating Current = 20 mA, RGK = 1 kΩ) TJ = 25°C IH _ 0.19 3.0 mA TJ = -40°C _ 0.33 6.0

© 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/11/20 Thyristors Surface Mount > 200 - 600V > C106 Series Dynamic Characteristics Characteristic Symbol Min Ty p Max Unit Critical Rate-of-Rise of Off State Voltage (VAK = Rated VDRM, Exponential Waveform, RGK = 1kΩ,TJ = 110°C) dv/dt – 8.0 − V/µs 3. Pulse Test: Pulse Width ≤ 2.0 ms, Duty Cycle ≤ 2%. 4. RGK is not included in measurement. Voltage Current Characteristic of SCR Symbol Parameter VDRM Peak Repetitive Forward Off State Voltage IDRM Peak Forward Blocking Current VRRM Peak Repetitive Reverse Off State Voltage IRRM Peak Reverse Blocking Current VTM Maximum On State Voltage IH Holding Current +Current Quadrant 1 Main Terminal 2 + VTM IH On State Off State IDRM at VDRM +Voltage IRRM at VRRM Quadrant 3 Main Terminal 2 - IH VTM

© 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/11/20 Thyristors Surface Mount > 200 - 600V > C106 Series Dimensions Part Marking System Pin Assignment

1 Cathode

2 Anode

3 Gate

Ordering Information

(Pb-Free)

2500 Units/Box

C106D1G* C106MG C106M1G* C106MTG 60 Units/Tube

1920 Units/Box

*D1 signifies European equivalent for D suffix and M1 signifies European equivalent for M suffix. Dim Inches Millimeters Min Max Min Max A 0.102 0.110 2.60 2.80 A1 0.047 0.055 1 .20 1 .40 b 0.028 0.034 0.70 0.86 b2 0.028 0.034 0.70 0.86 c 0.019 0.022 0.49 0.57 D 0.417 0.449 10.60 11 .40 E 0.291 0.323 7 .40 8.20 e 0.090 TYP 2.29 TYP L 0.551 0.630 14.00 16.00 L1 0.091 0.106 2.30 2.70 P 0.118 0.134 3.00 3.40 Q 0.142 0.157 3.60 4.00 b1 0.047 0.055 1. 2 1. 4 Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics. 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 077-01 THRU -08 OBSOLETE, NEW STANDARD 077-09. 12 3 E Q ØP D e e c b2 x2 L A PIN4 BACKSIDE TAB b C106xxG YMAXX Y =Year M =Month A =Assembly Site XX =Lot Serial Code C106xx =Device Code xx =B, D, D1, M, M1 G =Pb-Free Package TO-225A A Case 07 7 Style 2 1. Cathode 2. Anode 3. Gate