Datasheet search site | www.alldatasheet.com
Document overview
- PDF pages: 2
Technical content
Features
JJ 30A, SPDT , NO output contacts JJ 100 to 240VAC input voltage JJ 70 to 220VAC adjustable undervoltage trip point in 2 ranges JJ Restart delays from 3 - 300s JJ Trip delay 1 - 20s fixed JJ Isolated or non-isolated relay contacts Wiring Diagram V = Voltage NO = Normally Open NC = Normally Closed C = Common T1 = Undervoltage Trip Point T2 = Restart Delay L1 N/L2 Accessories P1015-13 (AWG 10/12), P1015-64 (AWG 14/16) Female Quick Connect These 0.25 in. (6.35 mm) female terminals are constructed with an insulator barrel to provide strain relief. C103PM (AL) DIN Rail 35 mm aluminum DIN rail available in a 36 in. (91 .4 cm) length. P1023-6 Mounting bracket The 90° orientation of mounting slots makes installation/removal of modules quick and easy. P1023-20 DIN Rail Adapter Allows module to be mounted on a 35 mm DIN type rail with two #10 screws. P1015-18 Quick Connect to Screw Adapter Screw adapter terminal designed for use with all modules with 0.25 in. (6.35 mm) male quick connect terminals.
© 2016 Littelfuse Protection Relays & Controls Protection Relays Voltage Monitoring Relays www.littelfuse.com/hlva6i23 Rev: 1-A-062116 HLVA6I23 Specifications Input Min & Max RMS Voltage 70 to 264VAC AC Line Frequency 50/60 Hz Power Consumption AC ≤ 4VA Undervoltage Sensing Type Peak voltage sensing Ranges (4) 70 to 120VAC (6) 170 to 220VAC Pull-In Voltage 105% or trip point voltage Trip Point Accuracy ± 3% of trip point Time Delay Restart Delays 3 - 300s adjustable Trip Delay 1 - 20s fixed in 1s increments Repeat Accuracy ±0.5% or 20ms, whichever is greater Tolerance (Factory Calibration) ±5% Reset Time ≤ 150ms Time Delay vs. Temp. & Voltage ≤ ±10% Output Type Electromechanical relay Form SPDT Ratings SPDT-NO SPDT-NC General Purpose 125/240VAC 30A 15A Resistive 125/240VAC 30A 15A 28VDC 20A 10A Motor Load 125VAC 1 hp* 1/4 hp 240VAC 2 hp 1 hp** Life Mechanical - 1 x 10 6 Electrical - 1 x 10 5, *3 x104, **6,000 Protection Surge IEEE C62.41-1991 Level A Circuitry Encapsulated Isolation Voltage ≥ 1500V RMS input to output; isolated units Insulation Resistance ≥ 100 MΩ Mechanical Mounting Surface mount with one #10 (M5 x 0.8) screw Dimensions H 76.7 mm (3”); W 51.3 mm (2”); D 38.1 mm (1.5”) Termination 0.25 in. (6.35 mm) male quick connects Environmental Operating/Storage Temperature -40° to 60°C / -40° to 85°C Humidity 95% relative, non-condensing Weight ≅ 3.9 oz (111 g) tr = Restart Delay td = Trip Delay PI = Pull-in 105% or trip point TP = Trip Point V = Monitored Voltage IV = Input voltage C-NO = Normally Open Contacts C-NC = Normally Closed Contacts PI TP V C-NO C-NC IV Function Diagram