C10-0046

LS9V SAFT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

A prismatic battery pack for a wide range of applications requesting low base currents combined with superimposed pulses. The LS 9 V version yields good voltage readings in a wide T range (-60°C to +85°C). Benefits l High voltage, stable during most of the application’s lifetime l Wide operating temperature range l Low self-discharge rate (less than 1 % per year of storage at +20°C) l Easy integration into compact systems Key features l Pack assembled from three ½ AA-sized (and UL-recognized) cells connected in series l Component cells with stainless steel container and hermetic glass-to-metal sealing l Plastic sleeve for battery housing l Miniature snap-on terminals l Non-flammable electrolyte l Non-restricted for transport Main applications l Memory back-up l Alarm and security devices l Smoke detectors l Alarm equipment l Industrial electronics l Medical equipment September 2011 Pack construction Primary lithium batteries LS 9 V Primary lithium-thionyl chloride (Li-SOCl2) High energy density Battery pack Pack designation LS 9 V Part number C10-0 046

Electrical characteristics

(typical values relative to cells stored for one year or less at + 30°C max.) Nominal capacity 1.2 Ah (at 1 mA, + 20°C, 6.0 V cut-off. The capacity restored by the battery pack (1.0 mA) varies according to current drain, temperature and cut-off) Open circuit voltage (at + 20°C) 11.0 V Nominal voltage (at + 20°C and 0.1 mA) 10.8 V Pulse capability: Typically up to 100 mA (0. 1 second pulses, drained every 2 mn at + 20°C from undischarged cells with 10 µA base current, yield voltage readings above 3.0 V. The readings may vary according to the pulse characteristics, the temperature, and the cell’s previous history. Fitting the cell with a capacitor may be recommended in severe conditions. Consult Saft) Maximum recommended continuous current 35 mA (Higher currents possible, consult Saft) Storage (recommended) + 30°C (+ 86°F) max (for more severe conditions, consult Saft) Operating temperature range - 60°C/+85°C (Operation above ambient T may lead to reduced capacity and (- 76°F/+ 185°F) lower voltage readings at the beginning of pulses. Consult Saft) Typical weight 29 g (1 oz) Li metal content approx. 0.9 g LS 14250 in series

Doc. No 31080-2-0911 Information in this document is subject to change without notice and becomes contractual only after written confirmation by Saft. For more details on primary lithium technologies please refer to Primary Lithium Batteries Selector Guide Doc N o 31048-2. Published by the Communications Department. Photo credit: Saft Société anonyme au capital de 31 944 000 RCS Bobigny B 383 703 873 Produced in the UK by Arthur Associates Limited. 11 1010 1001000.01 0.1 +70°C +20°C -40°C 0.10.1 11 1010 1001000.01 -20°C +70°C -40°C +20°C 11.5 11.0 10.5 10.0 9.5 9.0 8.5 8.0 7.5 7.0 6.5 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.1 1 10 100 1000 10000 12.0 11.5 11.0 10.5 10.0 9.5 9.0 8.5 8.0 7.5 7.0 6.5 6.0 400 Ohms/8.5 mA

56 Ohms/54 mA

3 kOhms/1.2 mA 7.5 kOhms/0.5 mA 11 1010 1001000.01 0.1 +70°C +20°C -40°C 0.10.1 11 1010 1001000.01 -20°C +70°C -40°C +20°C 11.5 11.0 10.5 10.0 9.5 9.0 8.5 8.0 7.5 7.0 6.5 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.1 1 10 100 1000 10000 12.0 11.5 11.0 10.5 10.0 9.5 9.0 8.5 8.0 7.5 7.0 6.5 6.0 400 Ohms/8.5 mA 3 kOhms/1.2 mA 7.5 kOhms/0.5 mA LS 9 V battery pack Time (hours) Current (mA) Storage l The storage area should be clean, cool (preferably not exceeding +30°C), dry and ventilated. Warning l Fire, explosion and burn hazard. l Do not recharge, short circuit, crush, disassemble, heat above 100°C (212°F), incinerate, or expose contents to water. l Do not solder directly to the battery pack. Saft Specialty Battery Group 12, rue Sadi Carnot

93170 Bagnolet - France

Tel.: +33 (0)1 49 93 19 18 Fax: +33 (0)1 49 93 19 69 www.saftbatteries.com 47.5 max 49.5 max max 27.5 max 12.7 ± 0.1 Dimensions in mm. Typical discharge profiles at + 20°C Voltage plateau versus Current and Temperature (at mid-discharge) Battery pack voltage (V)Battery pack voltage (V) 11 1010 1001000.01 0.1 +70°C +20°C -40°C 0.10.1 11 1010 1001000.01 -20°C +70°C -40°C +20°C 11.5 11.0 10.5 10.0 9.5 9.0 8.5 8.0 7.5 7.0 6.5 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.1 1 10 100 1000 10000 12.0 11.5 11.0 10.5 10.0 9.5 9.0 8.5 8.0 7.5 7.0 6.5 6.0 400 Ohms/8.5 mA 3 kOhms/1.2 mA 7.5 kOhms/0.5 mA Current (mA) Restored Capacity versus Current and Temperature (6.0 V cut-off) Capacity (Ah)