C0G

C0G AVX | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

C0G (NP0) Dielectric 090519 General Specifications C0G (NP0) is the most popular formulation of the “temperature-compensating,” EIA Class I ceramic materials. Modern C0G (NP0) formulations contain neodymium, samarium and other rare earth oxides. C0G (NP0) ceramics offer one of the most stable capacitor dielectrics available. Capacitance change with temperature is 0 ±30ppm/°C which is less than ±0.3% C from -55°C to +125°C. Capacitance drift or hysteresis for C0G (NP0) ceramics is negligible at less than ±0.05% versus up to ±2% for films. Typical capacitance change with life is less than ±0.1% for C0G (NP0), one-fifth that shown by most other dielectrics. C0G (NP0) formulations show no aging characteristics. PART NUMBER (see page 4 for complete part number explanation) 0805 5 A J A 2 AT101 Size (L” x W”) Dielectric C0G (NP0) = A Capacitance Tolerance B = ±.10 pF (<10pF) C = ±.25 pF (<10pF) D = ±.50 pF (<10pF) F = ±1% (≥ 10 pF) G = ±2% (≥ 10 pF) J = ±5% K = ±10% Failure Rate A = Not Applicable Packaging 2 = 7” Reel 4 = 13” Reel U = 4mm TR (01005) Special Code A = Std. Product Terminations T = Plated Ni and Sn Capacitance Code (In pF) 2 Sig. Digits + Number of Zeros Voltage 6.3V = 6 10V = Z 16V = Y 25V = 3 50V = 5 100V = 1 200V = 2 500V = 7 Contact Factory For 1 = Pd/Ag Term 7 = Gold Plated NOT RoHS COMPLIANT Contact Factory For Multiples NOTE: Contact factory for availability of Termination and Tolerance Options for Specific Part Numbers. Contact factory for non-specified capacitance values.

C0G (NP0) Dielectric Specifications and Test Methods Parameter/Test NP0 Specification Limits Measuring Conditions Operating Temperature Range -55ºC to +125ºC Temperature Cycle Chamber Capacitance Within specified tolerance <30 pF: Q≥ 400+20 x Cap Value ≥30 pF: Q≥ 1000 Freq.: 1.0 MHz ± 10% for cap ≤ 1000 pF 1.0 kHz ± 10% for cap > 1000 pF Voltage: 1.0Vrms ± .2VQ Insulation Resistance 100,000MΩ or 1000MΩ - µF , whichever is less Charge device with rated voltage for 60 ± 5 secs @ room temp/humidity Dielectric Strength No breakdown or visual defects Charge device with 250% of rated voltage for 1-5 seconds, w/charge and discharge current limited to 50 mA (max) Note: Charge device with 150% of rated voltage for 500V devices. Resistance to Flexure Stresses Appearance No defects Deflection: 2mm Test Time: 30 seconds Capacitance Variation ±5% or ±.5 pF, whichever is greater Q Meets Initial Values (As Above) Insulation Resistance ≥ Initial Value x 0.3 Solderability ≥ 95% of each terminal should be covered with fresh solder Dip device in eutectic solder at 230 ± 5ºC for 5.0 ± 0.5 seconds Resistance to Solder Heat Appearance No defects, <25% leaching of either end terminal Dip device in eutectic solder at 260ºC for 60sec- onds. Store at room temperature for 24 ± 2hours before measuring electrical properties. Capacitance Variation ≤ ±2.5% or ±.25 pF, whichever is greater Q Meets Initial Values (As Above) Insulation Resistance Meets Initial Values (As Above) Dielectric Strength Meets Initial Values (As Above) Thermal Shock Appearance No visual defects Step 1: -55ºC ± 2º 30 ± 3 minutes Capacitance Variation ≤ ±2.5% or ±.25 pF, whichever is greater Step 2: Room Temp ≤ 3 minutes Q Meets Initial Values (As Above) Step 3: +125ºC ± 2º 30 ± 3 minutes Insulation Resistance Meets Initial Values (As Above) Step 4: Room Temp ≤ 3 minutes Dielectric Strength Meets Initial Values (As Above) Repeat for 5 cycles and measure after 24 hours at room temperature Load Life Appearance No visual defects Charge device with twice rated voltage in test chamber set at 125ºC ± 2ºC for 1000 hours (+48, -0). Remove from test chamber and stabilize at room temperature for 24 hours before measuring. Capacitance Variation ≤ ±3.0% or ± .3 pF, whichever is greater Q (C=Nominal Cap) ≥ 30 pF: Q≥ 350 ≥10 pF, <30 pF: Q≥ 275 +5C/2 <10 pF: Q≥ 200 +10C Insulation Resistance ≥ Initial Value x 0.3 (See Above) Dielectric Strength Meets Initial Values (As Above) Load Humidity Appearance No visual defects Store in a test chamber set at 85ºC ± 2ºC/ 85% ± 5% relative humidity for 1000 hours (+48, -0) with rated voltage applied. Remove from chamber and stabilize at room temperature for 24 ± 2 hours before measuring. Capacitance Variation ≤ ±5.0% or ± .5 pF, whichever is greater Q ≥ 30 pF: Q≥ 350 ≥10 pF, <30 pF: Q≥ 275 +5C/2 <10 pF: Q≥ 200 +10C Insulation Resistance ≥ Initial Value x 0.3 (See Above) Dielectric Strength Meets Initial Values (As Above) 051818

C0G (NP0) Dielectric Capacitance Range PREFERRED SIZES ARE SHADED SIZE 0101* 0201 0402 0603 0805 1206 Soldering Reflow Only Reflow Only Reflow/Wave Reflow/Wave Reflow/Wave Reflow/Wave Packaging All Paper All Paper All Paper All Paper Paper/Embossed Paper/Embossed W) Width WVDC 16 25 50 16 25 50 16 25 50 100 200 16 25 50 100 200 250 16 25 50 100 200 250 500 Cap 0.5 A A C C C G G G G J J J J J J J J J J J (pF) 1.0 B A A C C C G G G G J J J J J J J J J J J

1.2 B A A C C C G G G G J J J J J J J J J J J

1.5 B A A C C C G G G G J J J J J J J J J J J

1.8 B A A C C C G G G G J J J J J J J J J J J

2.2 B A A C C C G G G G J J J J J J J J J J J

2.7 B A A C C C G G G G J J J J J J J J J J J

3.3 B A A C C C G G G G J J J J J J J J J J J

3.9 B A A C C C G G G G J J J J J J J J J J J

4.7 B A A C C C G G G G J J J J J J J J J J J

5.6 B A A C C C G G G G J J J J J J J J J J J

6.8 B A A C C C G G G G J J J J J J J J J J J

8.2 B A A C C C G G G G J J J J J J J J J J J

10 B A A C C C G G G G G J J J J J N J J J J J J J

12 B A A C C C G G G G G J J J J J N J J J J J J J

15 B A A C C C G G G G G J J J J J N J J J J J J J

18 B A A C C C G G G G G J J J J J N J J J J J J J

22 B A A C C C G G G G G J J J J J N J J J J J J J

27 B A A C C C G G G G G J J J J J N J J J J J J J

33 B A A C C C G G G G G J J J J J N J J J J J J J

39 B A A C C C G G G G G J J J J J N J J J J J J J

47 B A A C C C G G G G G J J J J J N J J J J J J J

56 B A A C C C G G G G G J J J J J N J J J J J J

68 B A A C C C G G G G G J J J J J N J J J J J J

82 B A A C C C G G G G G J J J J J N J J J J J J

100 B A A C C C G G G G G J J J J J N J J J J J J

120 C C C G G G G G J J J J J N J J J J J J

150 C C C G G G G G J J J J J N J J J J J J

180 C C C G G G G G J J J J J N J J J J J J

220 C C C G G G G G J J J J J N J J J J J M

270 C C C G G G G J J J J J N J J J J J M

330 C C C G G G G J J J J J N J J J J J M

390 C C C G G G G J J J J J J J J J J M

470 C C C G G G G J J J J J J J J J J M

560 C C C G G G G J J J J J J J J J J M

680 C C C G G G G J J J J J J J J J J P

820 C C C G G G G J J J J J J J J J M

1000 C C C G G G G J J J J J J J J J Q

1200 G G G J J J J J J J J J Q

1500 G G G J J J J J J J M Q

1800 G G G J J J N J J M M Q

2200 G G G N N N N J J M P Q

2700 G G G N N N N J J M P Q

3300 G G G P N N N J J M P Q

3900 G G G P P P N J J M P

4700 G G G P P P N J J M P

5600 P P P J J M P

6800 P P P M M M P

8200 P P P M M M P

Cap 0.010 P P P P P P P (μF) 0.012 P P P

0.015 P P P

0.018 P P P

0.022 P P P

0.027 0.033 0.039 0.047 0.068 0.082 0.1 WVDC 16 25 50 16 25 50 16 25 50 100 200 16 25 50 100 200 250 16 25 50 100 200 250 500 SIZE 0101* 0201 0402 0603 0805 1206 Letter A B C E G K M N P Q X Y Z Max. Thickness 0.33 (0.013) 0.22 (0.009) 0.56 (0.022) 0.71 (0.028) 0.90 (0.035) 0.94 (0.037) 1.02 (0.040) 1.27 (0.050) 1.40 (0.05 5) 1.52 (0.060) 1.78 (0.070) 2.29 (0.090) 2.54 (0.100) 2.79 (0.110) PAPER EMBOSSED 031119

C0G (NP0) Dielectric Capacitance Range PREFERRED SIZES ARE SHADED SIZE 1210 1812 1825 2220 2225 Soldering Reflow Only Reflow Only Reflow Only Reflow Only Reflow Only Packaging Paper/Embossed All Embossed All Embossed All Embossed All Embossed WVDC 25 50 100 200 500 25 50 100 200 500 50 100 200 50 100 200 50 100 200 Cap 0.5 (pF) 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 J 12 J 15 J 18 J 22 J 27 J 33 J 39 J 47 J 56 J 68 J 82 J 100 J 120 J 150 J 180 J 220 J 270 J 330 J 390 M 470 M

560 J J J J M

680 J J J K P

820 J J J K P

1000 J J P P P K K N N M M M M M M P

1200 P P P P P K K N N M M M M M M P

1500 P P P P P K K N N M M M M M M P

1800 P P P P P K K N N M M M M M M P

2200 P P P P N K K N N P X X M M M P

2700 P P P P K K N P Q X X M M M P

3300 P P P P K K N P Q X X X X M M P

3900 P P P K K N P Q X X X X M M P

4700 P P P K K N P Y X X X X X X M M P

5600 P P P K K P P Y X X X X X X M M P

6800 P P P K K Q Q X X X X X X M M P

8200 P P K M Q Q X X X X X X M M P

Cap 0.010 N N K M Q Q X X X X X X M M P (pF) 0.012 N N K M Q X X X X X X M M P

0.015 P P Q X X X X X X M M Y

0.018 P P Q X X X X X X M M Y

0.022 P P Q X X X X X M Y Y

0.027 Q Q X X X Y X X P Y Y

0.033 Q Q X X X X X X Y Y

0.039 X X X X Y X Y Y

0.047 X X X X Y X Z

0.068 Z Z Y Z X Z

0.082 Z Z Y Z X Z

0.1 Z Z Z Z Z Z

WVDC 25 50 100 200 500 25 50 100 200 500 50 100 200 50 100 200 50 100 200 SIZE 1210 1812 1825 2220 2225 Letter A B C E G K M N P Q X Y Z Max. Thickness 0.33 (0.013) 0.22 (0.009) 0.56 (0.022) 0.71 (0.028) 0.90 (0.035) 0.94 (0.037) 1.02 (0.040) 1.27 (0.050) 1.40 (0.055) 1.52 (0.060) 1.78 (0.070) 2.29 (0.090) 2.54 (0.100) 2.79 (0.110) PAPER EMBOSSED 051818