C0727J5003AHF ANAREN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model C0727J5003AHF Rev A PRELIMINARY Ultra Low Profile 0805 3 dB, 90° Hybrid Coupler
Description
The C0727J5003AHF is a low cost, low profile sub -miniature high performance 3 dB coupler in an easy to use surface mount package. The C0727J5003AHF is ideal for balanced power and low noise amplifiers, plus signal distribution and other applications where low insertion loss and tight amplitude and phase balance are required. The C0727J5003AHF is available on tape and reel for pick and place high volume manufacturing. All of the Xinger components are constructed from ceramic filled PTFE composites which possess excellent electrical and mechanical stability. All p arts have been subjected to rigorous qualification testing and units are 100% RF tested. Detailed Electrical Specifications: Specifications subject to change without notice. Features: 700 – 2700 MHz 0.7mm Height Profile High Isolation & Low Loss LTE Bands: 24 Surface Mountable Tape & Reel Non-conductive Surface RoHS Compliant Halogen-Free 100% RF Tested -55°C to 105°C ROOM (25C) Parameter Min. Typ. Max Unit Frequency 700 2700 MHz Port Impedance 50 Ω Return Loss 23 31 dB Isolation 23 28.8 dB Insertion Loss* 0.7 0.8 dB Amplitude Balance 2.3 2.8 dB Phase Balance (relative to 90°) 6.5 11 Degrees Power Handling @85C 2 Watts Operating Temperature -55 +105 ºC * Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC) Outline Drawing
www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model C0727J5002AHF Rev A Typical Broadband Performance: 10 MHz. to 8010 MHz. -45 -40 -35 -30 -25 -20 -15 -10 Return Loss at Input Port Freq [GHz] [dB] -0.9 -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 Insertion Loss Freq [GHz] [dB] -1.5 -0.5 0.5 1.5 Amplitude Balance (dB) Freq [GHz] -15 -10 Phase Balance Freq [GHz] [degree] -45 -40 -35 -30 -25 -20 -15 -10 Isolation (dB) Freq [GHz]
www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model C0727J5003AHF Rev A PRELIMINARY Typical Performance: 600 MHz. to 2800 MHz. -45 -40 -35 -30 -25 -20 -15 -10 Return Loss at Input Port Freq [GHz] [dB] -0.9 -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 Insertion Loss Freq [GHz] [dB] -2.4 -1.8 -1.2 -0.6 0.6 1.2 1.8 2.4 Amplitude Balance (dB) Freq [GHz] -15 -10 Phase Balance Freq [GHz] [degree] -45 -40 -35 -30 -25 -20 -15 -10 Isolation (dB) Freq [GHz]
www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model C0727J5002AHF Rev A Definition of Measured Specifications *100% RF test is performed per spec definition for pin configuration 1 and port 1 (input port) is connected to pin1, port 2 (isolated port) is connected to pin 3, port 3 (direct port) is connected to pin 4 and port 4 (isolated) is connected to pin 6. Parameter Definition Mathematical Representation i, j, k, m is denoted as the port index of input, isolated , direct and coupled port for specific pin configuration shown in the table Return Loss The impedance match of the coupler to a 50 system. Return Loss is an alternate means to express VSWR. 1020log ( ) iiS Isolation The input power divided by the sum of the power at the two output ports. 1020log jiS Insertion Loss The input power divided by the sum of the power at the two output ports. 1010log ( ) mi kiSS Amplitude Balance The difference in power between the two outputs. Phase Balance The difference in phase angle between the two output ports. 90o ki miSS