C052G102J1G5CR_10 KEMET | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 15
Technical content
© KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-63004 MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED Multilayer ceramic capacitors are available in a variety of physical sizes and configurations, including leaded devices and surface mounted chips. Leaded styles include molded and conformally coated parts with axial and radial leads. However, the basic capacitor element is similar for all styles. It is called a chip and consists of formulated dielectric materials which have been cast into thin layers, interspersed with metal electrodes alternately exposed on opposite edges of the laminated structure. The entire structure is fired at high temperature to produce a monolithic block which provides high capacitance values in a small physical volume. After firing, conductive terminations are applied to opposite ends of the chip to make contact with the exposed electrodes. Termination materials and methods vary depending on the intended use. TEMPERATURE CHARACTERISTICS Ceramic dielectric materials can be formulated with a wide range of characteristics. The EIA standard for ceramic dielectric capacitors (RS-198) divides ceramic dielectrics into the following classes: Class I: Temperature compensating capacitors, suitable for resonant circuit application or other appli- cations where high Q and stability of capacitance char- acteristics are required. Class I capacitors have predictable temperature coefficients and are not affected by voltage, frequency or time. They are made from materials which are not ferro-electric, yielding superior stability but low volumetric ef ficiency. Class I capacitors are the most stable type available, but have the lowest volumetric efficiency. Class II: Stable capacitors, suitable for bypass or coupling applications or frequency discriminating circuits where Q and stability of capacitance char- acteristics ar e not of major importance. Class II capacitors have temperature characteristics of ± 15% or less. They ar e made fr om materials which ar e ferro-electric, yielding higher volumetric efficiency but less stability. Class II capacitors are affected by temperature, voltage, frequency and time. Class III: General purpose capacitors, suitable for by-pass coupling or other applications in which dielectric losses, high insulation resistance and stability of capacitance characteristics are of little or no importance. Class III capacitors are similar to Class II capacitors except for temperature characteristics, which are greater than ± 15%. Class III capacitors have the highest vol umetric efficiency and poorest stability of any type. KEMET leaded ceramic capacitors are offered in the three most popular temperature characteristics: C0G: Class I, with a temperature coefficient of 0 ± 30 ppm per degree C over an operating temperature range of - 55°C to + 125°C (Also known as “NP0”). X7R: Class II, with a maximum capacitance change of ± 15% over an operating temperature range of - 55° C to + 125°C. Z5U: Class III, with a maximum capacitance change of + 22% - 56% over an operating tem- perature range of + 10° C to + 85° C. Specified electrical limits for these three temperature characteristics are shown in Table 1. SPECIFIED ELECTRICAL LIMITS Table I C0G X7R Z5U Dissipation Factor: Measured at following conditions. C0G – 1 kHz and 1 vrms if capacitance >1000pF
1 MHz and 1 vrms if capacitance 1000 pF
X7R – 1 kHz and 1 vrms* or if extended cap range 0.5 vrms Z5U – 1 kHz and 0.5 vrms 0.10% 2.5% (3.5% @ 25V) 4.0% Dielectric Stength: 2.5 times rated DC voltage. Insulation Resistance (IR): At rated DC voltage, whichever of the two is smaller 1,000 M F or 100 G 1,000 M F or 100 G 1,000 M F or 10 G Temperature Characteristics: Range, °C Capacitance Change without DC voltage -55 to +125 0 ± 30 ppm/° C -55 to +125 ± 15% + 10 to +85 +22%,-56% * MHz and 1 vrms if capacitance 100 pF on military product. Parameter Temperature Characteristics Pass Subsequent IR Test
APPLICATION NOTES FOR MULTILAYER CERAMIC CAPACITORS © KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-63006 TABLE 1 EIA TEMPERATURE CHARACTERISTIC CODES FOR CLASS I DIELECTRICS Significant Figure Multiplier Applied Tolerance of of Temperature to Temperature Temperature Coefficient Coefficient Coefficient * PPM per Letter Multi- Number PPM per Letter Degree C Symbol plier Symbol Degree C Symbol
0.0 C -1 0 ±30 G
0.3 B -10 1 ±60 H
0.9 A -100 2 ±120 J
1.0 M -1000 3 ±250 K
1.5 P -100000 4 ±500 L
2.2 R +1 5 ±1000 M
3.3 S +10 6 ±2500 N
4.7 T +100 7
7.5 U +1000 8
+10000 9 * These symetrical tolerances apply to a two-point measur ement of temperature coefficient: one at 25°C and one at 85°C. Some deviation is permitted at lower temperatures. For example, the PPM tolerance for C0G at -55°C is +30 / -72 PPM. TABLE 2 EIA TEMPERATURE CHARACTERISTIC CODES FOR CLASS II & III DIELECTRICS Low Temperature High Temperature Maximum Capacitance Rating Rating Shift Degree Letter Degree Number Letter Celcius Symbol Celcius Symbol Percent Symbol +10C Z +45C 2 ±1.0% A -30C Y +65C 4 ±1.5% B -55C X +85C 5 ±2.2% C +105C 6 ±3.3% D +125C 7 ±4.7% E +150C 8 ±7.5% F +200C 9 ±10.0% P ±15.0% R ±22.0% S +22/-33% T +22/-56% U +22/-82% V
Effect of Temperature: Both capacitance and dissipa- tion factor are affected by variations in temperature. The max- imum capacitance change with temperature is defined by the temperature characteristic. However, this only defines a “box” bounded by the upper and lower operating temperatures and the minimum and maximum capacitance values. Within this “box”, the variation with temperature depends upon the spe- cific dielectric formulation. Typical curves for KEMET capaci- tors are shown in Figures 3, 4, and 5. These figures also include the typical change in dissipation factor for KEMET capacitors. Insulation r esistance decr eases with temperatur e. Typically, the insulation resistance at maximum rated temper- ature is 10% of the 25° C value. Effect of V oltage: Class I ceramic capacitors ar e not affected by variations in applied AC or DC voltages. For Class II and III ceramic capacitors, variations in voltage affect only the capacitance and dissipation factor. The application of DC voltage higher than 5 vdc reduces both the capacitance and dissipation factor. The application of AC voltages up to 10-20 Vac tends to increase both capacitance and dissipation factor. At higher AC voltages, both capacitance and dissipation factor begin to decrease. Typical curves showing the effect of applied AC and DC voltage are shown in Figure 6 for KEMET X7R capacitors and Figure 7 for KEMET Z5U capacitors. Effect of Frequency: Frequency affects both capaci- tance and dissipation factor. Typical curves for KEMET multi- layer ceramic capacitors are shown in Figures 8 and 9. The variation of impedance with frequency is an impor- tant consideration in the application of multilayer ceramic capacitors. Total impedance of the capacitor is the vector of the capacitive reactance, the inductive reactance, and the ESR, as illustrated in Figure 2. As frequency increases, the capacitive reactance decreases. However, the series inductance (L) shown in Figure 1 produces inductive reactance, which increases with frequency. At some frequency, the impedance ceases to be capacitive and becomes inductive. This point, at the bottom of the V-shaped impedance versus frequency curves, is the self-resonant frequency. At the self-resonant fre- quency, the reactance is zero, and the impedance consists of the ESR only. Typical impedance versus frequency curves for KEMET multilayer ceramic capacitors ar e shown in Figures 10, 11, and 12. These curves apply to KEMET capacitors in chip form, with- out leads. Lead configuration and lead length have a significant impact on the series inductance. The lead inductance is approximately 10nH/inch, which is large compared to the inductance of the chip. The effect of this additional inductance is a decr ease in the self-r esonant frequency, and an increase in impedance in the inductive region above the self-resonant frequency. Effect of Time: The capacitance of Class II and III dielectrics change with time as well as with temperatur e, volt- age and frequency. This change with time is known as “aging.” It is caused by gradual r ealignment of the crystalline structur e of the ceramic dielectric material as it is cooled below its Curie temperature, which produces a loss of capacitance with time. The aging process is predictable and follows a logarithmic decay. Typical aging rates for C0G, X7R, and Z5U dielectrics are as follows: C0G None X7R 2.0% per decade of time Z5U 5.0% per decade of time Typical aging curves for X7R and Z5U dielectrics are shown in Figure 13. The aging process is reversible. If the capacitor is heat- ed to a temperature above its Curie point for some period of time, de-aging will occur and the capacitor will regain the capacitance lost during the aging process. The amount of de- aging depends on both the elevated temperatur e and the length of time at that temperature. Exposure to 150°C for one- half hour or 125°C for two hours is usually sufficient to return the capacitor to its initial value. Because the capacitance changes rapidly immediately after de-aging, capacitance measurements are usually delayed for at least 10 hours after the de-aging process, which is often referred to as the “last heat.” In addition, manufacturers utilize the aging rates to set factory test limits which will bring the capacitance within the specified tolerance at some future time, to allow for customer receipt and use. Typically, the test limits are adjusted so that the capacitance will be within the specified tolerance after either 1,000 hours or 100 days, depending on the manufacturer and the product type. © KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 7 Application Notes APPLICATION NOTES FOR MULTILAYER CERAMIC CAPACITORS
APPLICATION NOTES FOR MULTILAYER CERAMIC CAPACITORS © KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-63008 POWER DISSIPATION Power dissipation has been empirically determined for two representative KEMET series: C052 and C062. Power dis- sipation capability for various mounting configurations is shown in Table 3. This table was extracted from Engineering Bulletin F-2013, which provides a more detailed treatment of this sub- ject. Note that no significant difference was detected between the two sizes in spite of a 2 to 1 surface area ratio. Due to the materials used in the construction of multilayer ceramic capac- itors, the power dissipation capability does not depend greatly on the surface area of the capacitor body, but rather on how well heat is conducted out of the capacitor lead wires. Consequently, this power dissipation capability is applicable to other leaded multilayer styles and sizes. TABLE 3 POWER DISSIPATION CAPABILITY (Rise in Celsius degrees per Watt) Power Mounting Configuration Dissipation of C052 & C062 1.00" leadwires attached to binding post 90 Celsius degrees of GR-1615 bridge (excellent heat sink) rise per Watt ±10% 0.25" leadwires attached to binding post 55 Celsius degrees of GR-1615 bridge rise per Watt ±10% Capacitor mounted flush to 0.062" glass- 77 Celsius degrees epoxy circuit board with small copper traces rise per Watt ±10% Capacitor mounted flush to 0.062" glass- 53 Celsius degrees epoxy circuit board with four square inches rise per Watt ±10% of copper land area as a heat sink As shown in Table 3, the power dissipation capability of the capacitor is very sensitive to the details of its use environ- ment. The temperature rise due to power dissipation should not exceed 20° C. Using that constraint, the maximum permissible power dissipation may be calculated from the data provided in Table 3. It is often convenient to translate power dissipation capa- bility into a permissible AC voltage rating. Assuming a sinu- soidal wave form, the RMS “ripple voltage” may be calculated The data necessary to make this calculation is included in Engineering Bulletin F-2013. However , the following criteria must be observed: 1. The temperature rise due to power dissipation should be limited to 20° C. 2. The peak AC voltage plus the DC voltage must not exceed the maximum working voltage of the capacitor. Provided that these criteria ar e met, multilayer ceramic E = Z x Where E = RMS Ripple V oltage (volts) P = Power Dissipation (watts) Z = Impedanc e R = ESR PMAX R capacitors may be operated with AC voltage applied without need for DC bias. RELIABILITY A well constructed multilayer ceramic capacitor is extremely reliable and, for all practical purposes, has an infi- nite life span when used within the maximum voltage and temperature ratings. Capacitor failure may be induced by sus- tained operation at voltages that exceed the rated DC voltage, voltage spikes or transients that exceed the dielectric with- standing voltage, sustained operation at temperatures above the maximum rated temperature, or the excessive tempera- ture rise due to power dissipation. Failure rate is usually expressed in terms of percent per 1,000 hours or in FITS (failure per billion hours). Some KEMET series are qualified under U.S. military established reliability specifications MIL-PRF-20, MIL-PRF-123, MIL- PRF-39014, and MIL-PRF-55681. Failure rates as low as 0.001% per 1,000 hours are available for all capacitance / voltage ratings covered by these specifications. These spec- ifications and accompanying Qualified Products List should be consulted for details. For series not covered by these military specifications, an internal testing program is maintained by KEMET Quality Assurance. Samples from each week’s production are sub- jected to a 2,000 hour accelerated life test at 2 x rated voltage and maximum rated temperature. Based on the results of these tests, the average failure rate for all non-military series covered by this test program is currently 0.06% per 1,000 hours at maximum rated conditions. The failure rate would be much lower at typical use conditions. For example, using MIL- HDBK-217D this failure rate translates to 0.9 FITS at 50% rated voltage and 50°C. Current failure rate details for specific KEMET multilay- er ceramic capacitor series are available on request. MISAPPLICATION Ceramic capacitors, like any other capacitors, may fail if they are misapplied. Typical misapplications include expo- sure to excessive voltage, current or temperature. If the dielectric layer of the capacitor is damaged by misapplication the electrical energy of the circuit can be released as heat, which may damage the circuit board and other components as well. If potential for misapplication exists, it is recommended that precautions be taken to protect personnel and equipment during initial application of voltage. Commonly used precau- tions include shielding of personnel and sensing for excessive power drain during board testing. STORAGE AND HANDLING Ceramic chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other envir onments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperatur e – reels may soften or warp, and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40˚ C, and maximum storage humidity not exceed 70% rela- tive humidity. In addition, temperature fluctuations should be minimized to avoid condensation on the parts, and atmos- pheres should be fr ee of chlorine and sulfur bearing com- pounds. For optimized solderability, chip stock should be used promptly, preferably within 1.5 years of receipt. from the following formula:
© KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-630034 CERAMIC MOLDED/AXIAL & RADIAL — MIL-PRF-20 Lead Dia. .025 (+.004 -.002) W .026 MIN. H L S W .045 MAX. H 1.25 MIN. L S W H 1.25 MIN. L S W Center Line of leads within .030" of Center Line of case. H 1.25 MIN. S .026 MIN. L C052 (CC05, CCR05) C056 (CCR05) C062 (CC06, CCR06), C512 (CC07, CCR07), C522 (CC08, CCR08) C066 (CCR06) Lead Dia. .025 (+.004 -.002) Lead Dia. .025 (+.004 -.002) Lead Dia. .025 (+.004 -.002) 1.25 MIN. DIMENSIONS — INCHES (MILLIMETERS) DL C 1.50 Min. (38.10) 1.50 Min. (38.10) CAPACITOR OUTLINE DRAWINGS - (AXIAL LEADS) CAPACITOR OUTLINE DRAWINGS (AXIAL LEADS) CAPACITOR OUTLINE DRAWINGS (RADIAL LEADS) DIMENSIONS — INCHES (MILLIMETERS) For packaging information, see pages 46, 47, and 48. Note: Leads are .625 minimum when tape and reel packaged * 0.200 (5.08) maximum for 100,000 pF only. Case Size Military Equivalent Styles H Height L Length W Width S Lead Spacing C052/ C062/ Case Size Military Equivalent Styles L Length D Body Diameter C Lead Diameter
© KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 35 CC(R) 75, 76
ORDERING INFORMATION
“J” Brand (CCR only), Temperature Characteristic Capacitance Capacitance Tolerance, Failure Rate (CCR only), Year Code Lot Code, Trademark (K) CCR0 5CH1 00FR FRONT CC(R) 05 Military Designation (Type, Temperature Characteristic, Capacitance, Tolerance, Failure Rate) For the standoff style, a “V” is added after the failure rate, or last character. 0804 AJ3 1433 REAR Date Code Lot Code, “J” Brand (CCR only), FSCM (Federal Source Code)CCR77C G102JM J31433 0804A Military Designation (Type, Temperature Characteristic, Capacitance, Tolerance, Failure Rate) “J” Brand (CCR only), FSCM (Federal Source Code) Date/Lot Code CC(R) 77 CCR78CG 103FR JAN K 31433 100V 0804A Military Designation (Type, Temperature Characteristic, Capacitance, Tolerance, Failure Rate) “JAN” Brand (CCR only), Trademark (K) FSCM (Federal Source Code) Voltage Date/Lot Code CC(R) 78 CCR79CG 103KM JAN K 31433 200V 0804A Military Designation (Type, Temperature Characteristic, Capacitance, Tolerance, Failure Rate) “JAN” Brand (CCR only), Trademark FSCM (Federal Source Code) Voltage Date/Lot Code CC(R) 79 CCR06 CG102 JS FRONT CC(R) 06 Military Designation (Type, Temperature Characteristic, Capacitance, Tolerance, Failure Rate) For the standoff style, a “V” is added after the failure rate, or last character. 0804A J100V 31433 REAR Date/LotCode “J” Brand (CCR only), Voltage FSCM (Federal Source Code) CCR07CG 472KM JAN KEMET 31433 200V 0804A Military Designation (Type, Temperature Characteristic, Capacitance, Tolerance, Failure Rate) “JAN” Brand, Trademark FSCM (Federal Source Code) Voltage, Date/Lot Code CC(R) 07 CCR08CG 472KM JAN KEMET 31433 200V 0809A Military Designation (Type, Temperature Characteristic, Capacitance, Tolerance, Failure Rate) “JAN” Brand, Trademark FSCM (Federal Source Code) Voltage, Date/Lot Code CC(R) 08 MIL-PRF-20 CERAMIC MOLDED/AXIAL & RADIAL — MIL-PRF-20 C 052 G 102 J 1 G 5 C R CERAMIC CASE SIZE See Table Below SPECIFICATION G – MIL-PRF-20 CAPACITANCE PICOFARAD CODE Expressed in picofarads (pF). First two digits represent significant figures. Third digit specifies number of zeros following except 9 indicates division by 10). Examples: 0.1 µF = 100,000 pF = 104 and 9.1 pF = 919. See tables for standard values. CAPACITANCE TOLERANCE Standard Others B – ±0.1pF WORKING VOLTAGE DC 2 – 200V; 1 – 100V; 5 – 50V FAILURE RATE A – Not Applicable M – 1.0% P – 0.1% R – 0.01% S – 0.001% LEAD MATERIAL C – 60/40 Tin/Lead (SnPb) INTERNAL CONSTRUCTION 5 – Multilayer TEMPERATURE CHARACTERISTIC KEMET Designator Military Equivalent EIA Equivalent Capacitance Change with Temp. Temp Range, Measured with- out DC Bias Voltage Measured with Bias (Rated Voltage) G (Ultra Stable) *CG (See below) C0G (NP0) -55 to +125° ±30 ppm/°C ±30 ppm/°C Standard tolerances for each Series are shown in the repetitive parts lists. Case Sizes Radial Axial C052 C114 C056 C124 C062 C192 C066 C202 C512 C222 C522 Part Number Example: C052G102J1G5CR (14 digits – no spaces) *CH – ±60 ppm/°C 8.2 pF-18.0 pF *CJ – ±120 ppm/°C 4.3 pF-7.5 pF *CK – ±250 ppm/°C 2.2 pF-3.9 pF *CX – not measurable 0.1 pF-2.0 pF
© KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-630036 CERAMIC MOLDED/AXIAL — MIL-PRF-20 ULTRA-STABLE TEMPERATURE CHARACTERISTIC — CG (EIA-C0G) RATINGS & PART NUMBER REFERENCE CAP. pF KEMET PART NUMBER MILITARY STYLE CC MILITARY STYLE CCR
1.0 C114G109(2)2G5C(1) CC75CX1R0(2) CCR75CX1R0(2)(1)
1.1 C114G119(2)2G5C(1) CC75CX1R1(2) CCR75CX1R1(2)(1)
1.2 C114G129(2)2G5C(1) CC75CX1R2(2) CCR75CX1R2(2)(1)
1.3 C114G139(2)2G5C(1) CC75CX1R3(2) CCR75CX1R3(2)(1)
1.5 C114G159(2)2G5C(1) CC75CX1R5(2) CCR75CX1R5(2)(1)
1.6 C114G169(2)2G5C(1) CC75CX1R6(2) CCR75CX1R6(2)(1)
1.8 C114G189(2)2G5C(1) CC75CX1R8(2) CCR75CX1R8(2)(1)
2.0 C114G209(2)2G5C(1) CC75CX2R0(2) CCR75CX2R0(2)(1)
2.2 C114G229(2)2G5C(1) CC75CK2R2(2) CCR75CK2R2(2)(1)
2.4 C114G249(2)2G5C(1) CC75CK2R4(2) CCR75CK2R4(2)(1)
2.7 C114G279(3)2G5C(1) CC75CK2R7(3) CCR75CK2R7(3)(1)
3.0 C114G309(3)2G5C(1) CC75CK3R0(3) CCR75CK3R0(3)(1)
3.3 C114G339(3)2G5C(1) CC75CK3R3(3) CCR75CK2R3(3)(1)
3.6 C114G369(3)2G5C(1) CC75CK3R6(3) CCR75CK3R6(3)(1)
3.9 C114G399(3)2G5C(1) CC75CK3R9(3) CCR75CK3R9(3)(1)
4.3 C114G439(3)2G5C(1) CC75CJ4R3(3) CCR75CJ4R3(3)(1)
4.7 C114G479(3)2G5C(1) CC75CJ4R7(3) CCR75CJ4R7(3)(1)
5.1 C114G519(3)2G5C(1) CC75CJ5R1(3) CCR75CJ5R1(3)(1)
5.6 C114G569(3)2G5C(1) CC75CJ5R6(3) CCR75CJ5R6(3)(1)
6.2 C114G629(3)2G5C(1) CC75CJ6R2(3) CCR75CJ6R2(3)(1)
6.8 C114G689(3)2G5C(1) CC75CJ6R8(3) CCR75CJ6R8(3)(1)
7.5 C114G759(3)2G5C(1) CC75CJ7R5(3) CCR75CJ7R5(3)(1)
8.2 C114G829(3)2G5C(1) CC75CH8R2(3) CCR75CH8R2(3)(1)
9.1 C114G919(3)2G5C(1) CC75CH9R1(3) CCR75CH9R1(3)(1)
10.0 C114G100(4)2G5C(1) CC75CH100(4) CCR75CH100(4)(1)
11.0 C114G110(4)2G5C(1) CC75CH110(4) CCR75CH110(4)(1)
12.0 C114G120(4)2G5C(1) CC75CH120(4) CCR75CH120(4)(1)
13.0 C114G130(4)2G5C(1) CC75CH130(4) CCR75CH130(4)(1)
15.0 C114G140(4)2G5C(1) CC75CH140(4) CCR75CH140(4)(1)
16.0 C114G160(4)2G5C(1) CC75CH160(4) CCR75CH160(4)(1)
18.0 C114G180(4)2G5C(1) CC75CH180(4) CCR75CH180(4)(1)
20.0 C114G200(4)2G5C(1) CC75CG200(4) CCR75CG200(4)(1)
22.0 C114G220(4)2G5C(1) CC75CG220(4) CCR75CG220(4)(1)
24.0 C114G240(4)2G5C(1) CC75CG240(4) CCR75CG240(4)(1)
27.0 C114G270(4)2G5C(1) CC75CG270(4) CCR75CG270(4)(1)
30.0 C114G300(4)2G5C(1) CC75CG300(4) CCR75CG300(4)(1)
33.0 C114G330(4)2G5C(1) CC75CG330(4) CCR75CG330(4)(1)
36.0 C114G360(4)2G5C(1) CC75CG360(4) CCR75CG360(4)(1)
39.0 C114G390(4)2G5C(1) CC75CG390(4) CCR75CG390(4)(1)
43.0 C114G430(4)2G5C(1) CC75CG430(4) CCR75CG430(4)(1)
47.0 C114G470(4)2G5C(1) CC75CG470(4) CCR75CG470(4)(1)
51.0 C114G510(4)2G5C(1) CC75CG510(4) CCR75CG510(4)(1)
56.0 C114G560(4)2G5C(1) CC75CG560(4) CCR75CG560(4)(1)
62.0 C114G620(4)2G5C(1) CC75CG620(4) CCR75CG620(4)(1)
68.0 C114G680(4)2G5C(1) CC75CG680(4) CCR75CG680(4)(1)
75.0 C114G750(4)2G5C(1) CC75CG750(4) CCR75CG750(4)(1)
200 VOLT – C114 (CC(R)75 PER MIL-PRF-20/27)
CAP. pF KEMET PART NUMBER MILITARY STYLE CC MILITARY STYLE CCR
82.0 C114G820(4)1G5C(1) CC75CG820(4) CCR75CG820(4)(1)
91.0 C114G910(4)1G5C(1) CC75CG910(4) CCR75CG910(4)(1)
100.0 C114G101(4)1G5C(1) CC75CG101(4) CCR75CG101(4)(1)
110.0 C114G11 1(4)1G5C(1) CC75CG11 1(4) CCR75CG11 1(4)(1)
120.0 C114G121(4)1G5C(1) CC75CG121(4) CCR75CG121(4)(1)
130.0 C114G131(4)1G5C(1) CC75CG131(4) CCR75CG131(4)(1)
150.0 C114G151(4)1G5C(1) CC75CG151(4) CCR75CG151(4)(1)
160.0 C114G161(4)1G5C(1) CC75CG161(4) CCR75CG161(4)(1)
180.0 C114G181(4)1G5C(1) CC75CG181(4) CCR75CG181(4)(1)
200.0 C114G201(4)1G5C(1) CC75CG201(4) CCR75CG201(4)(1)
220.0 C114G221(4)1G5C(1) CC75CG221(4) CCR75CG221(4)(1)
240.0 C114G241(4)1G5C(1) CC75CG241(4) CCR75CG241(4)(1)
270.0 C114G271(4)5G5C(1) CC75CG271(4) CCR75CG271(4)(1)
300.0 C114G301(4)5G5C(1) CC75CG301(4) CCR75CG301(4)(1)
330.0 C114G331(4)5G5C(1) CC75CG331(4) CCR75CG331(4)(1)
360.0 C114G361(4)5G5C(1) CC75CG361(4) CCR75CG361(4)(1)
390.0 C114G391(4)5G5C(1) CC75CG391(4) CCR75CG391(4)(1)
430.0 C114G431(4)5G5C(1) CC75CG431(4) CCR75CG431(4)(1)
470.0 C114G471(4)5G5C(1) CC75CG471(4) CCR75CG471(4)(1)
510.0 C114G511(4)5G5C(1) CC75CG511(4) CCR75CG511(4)(1)
560.0 C114G561(4)5G5C(1) CC75CG561(4) CCR75CG561(4)(1)
620.0 C114G621(4)5G5C(1) CC75CG621(4) CCR75CG621(4)(1)
680.0 C114G681(4)5G5C(1) CC75CG681(4) CCR75CG681(4)(1)
82.0 C124G820(4)2G5C(1) CC76CG820(4) CCR76CG820(4)(1)
91.0 C124G910(4)2G5C(1) CC76CG910(4) CCR76CG910(4)(1)
100.0 C124G101(4)2G5C(1) CC76CG101(4) CCR76CG101(4)(1)
110.0 C124G11 1(4)2G5C(1) CC76CG11 1(4) CCR76CG11 1(4)(1)
120.0 C124G121(4)2G5C(1) CC76CG121(4) CCR76CG121(4)(1)
130.0 C124G131(4)2G5C(1) CC76CG131(4) CCR76CG131(4)(1)
270.0 C124G271(4)1G5C(1) CC76CG271(4) CCR76CG271(4)(1)
300.0 C124G301(4)1G5C(1) CC76CG301(4) CCR76CG301(4)(1)
330.0 C124G331(4)1G5C(1) CC76CG331(4) CCR76CG331(4)(1)
360.0 C124G361(4)1G5C(1) CC76CG361(4) CCR76CG361(4)(1)
390.0 C124G391(4)1G5C(1) CC76CG391(4) CCR76CG391(4)(1)
430.0 C124G431(4)1G5C(1) CC76CG431(4) CCR76CG431(4)(1)
470.0 C124G471(4)1G5C(1) CC76CG471(4) CCR76CG471(4)(1)
510.0 C124G511(4)1G5C(1) CC76CG511(4) CCR76CG511(4)(1)
560.0 C124G561(4)1G5C(1) CC76CG561(4) CCR76CG561(4)(1)
620.0 C124G621(4)1G5C(1) CC76CG621(4) CCR76CG621(4)(1)
680.0 C124G681(4)1G5C(1) CC76CG681(4) CCR76CG681(4)(1)
750.0 C124G751(4)5G5C(1) CC76CG751(4) CCR76CG751(4)(1)
820.0 C124G821(4)5G5C(1) CC76CG821(4) CCR76CG821(4)(1)
910.0 C124G911(4)5G5C(1) CC76CG911(4) CCR76CG911(4)(1)
1,000.0 C124G102(4)5G5C(1) CC76CG102(4) CCR76CG102(4)(1)
150.0 C192G151(4)2G5C(1) CC77CG151(4) CCR77CG151(4)(1)
160.0 C192G161(4)2G5C(1) CC77CG161(4) CCR77CG161(4)(1)
180.0 C192G181(4)2G5C(1) CC77CG181(4) CCR77CG181(4)(1)
200.0 C192G201(4)2G5C(1) CC77CG201(4) CCR77CG201(4)(1)
220.0 C192G221(4)2G5C(1) CC77CG221(4) CCR77CG221(4)(1)
240.0 C192G241(4)2G5C(1) CC77CG241(4) CCR77CG241(4)(1)
270.0 C192G271(4)2G5C(1) CC77CG271(4) CCR77CG271(4)(1)
300.0 C192G301(4)2G5C(1) CC77CG301(4) CCR77CG301(4)(1)
330.0 C192G331(4)2G5C(1) CC77CG331(4) CCR77CG331(4)(1)
360.0 C192G361(4)2G5C(1) CC77CG361(4) CCR77CG361(4)(1)
390.0 C192G391(4)2G5C(1) CC77CG391(4) CCR77CG391(4)(1)
430.0 C192G431(4)2G5C(1) CC77CG431(4) CCR77CG431(4)(1)
470.0 C192G471(4)2G5C(1) CC77CG471(4) CCR77CG471(4)(1)
510.0 C192G511(4)2G5C(1) CC77CG511(4) CCR77CG511(4)(1)
560.0 C192G561(4)2G5C(1) CC77CG561(4) CCR77CG561(4)(1)
620.0 C192G621(4)2G5C(1) CC77CG621(4) CCR77CG621(4)(1)
680.0 C192G681(4)2G5C(1) CC77CG681(4) CCR77CG681(4)(1)
200 VOLT – C192 (CC(R)77 PER MIL-PRF-20/29)
200 VOLT – C124 (CC(R)76 PER MIL-PRF-20/28)
100 VOLT – C124 (CC(R)76 PER MIL-PRF-20/28)
100 VOLT – C114 (CC(R)75 PER MIL-PRF-20/27)
50 VOLT – C114 (CC(R)75 PER MIL-PRF-20/27)
50 VOLT – C124 (CC(R)76 PER MIL-PRF-20/28)
To complete Part Number, insert the following letters: (1) Available Failure Rates: A (CC styles only); M, P , R & S (CCR styles only). (2) Available Capacitance Tolerances: B, C. (3) Available Capacitance Tolerances: B, C, D. (4) Available Capacitance Tolerances: F , G, J.
© KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 37 RATINGS & PART NUMBER REFERENCE To complete Part Number, insert the following letters: (1) Available Failure Rates: A (CC styles only); M, P , R & S (CCR styles only). (2) Available Capacitance Tolerances: B, C. (3) Available Capacitance Tolerances: B, C, D. (4) Available Capacitance Tolerances: F , G, J. (5) Available Capacitance Tolerances: F , G, J, K. MIL-PRF-20 CERAMIC MOLDED/AXIAL — MIL-PRF-20 ULTRA-STABLE TEMPERATURE CHARACTERISTIC — CG (EIA-C0G) CAP. pF KEMET PART NUMBER MILITARY STYLE CC MILITARY STYLE CCR
750.0 C192G751(4)1G5C(1) CC77CG751(4) CCR77CG751(4)(1)
820.0 C192G821(4)1G5C(1) CC77CG821(4) CCR77CG821(4)(1)
910.0 C192G911(4)1G5C(1) CC77CG911(4) CCR77CG911(4)(1)
1,000.0 C192G102(4)1G5C(1) CC77CG102(4) CCR77CG102(4)(1) 1,100.0 C192G112(4)1G5C(1) CC77CG112(4) CCR77CG112(4)(1) 1,200.0 C192G122(4)1G5C(1) CC77CG122(4) CCR77CG122(4)(1) 1,300.0 C192G132(4)1G5C(1) CC77CG132(4) CCR77CG132(4)(1) 1,500.0 C192G152(4)1G5C(1) CC77CG152(4) CCR77CG152(4)(1) 1,600.0 C192G162(4)1G5C(1) CC77CG162(4) CCR77CG162(4)(1) 1,800.0 C192G182(4)1G5C(1) CC77CG182(4) CCR77CG182(4)(1) 2,000.0 C192G202(4)1G5C(1) CC77CG202(4) CCR77CG202(4)(1) 2,200.0 C192G222(4)1G5C(1) CC77CG222(4) CCR77CG222(4)(1) 2,400.0 C192G242(4)5G5C(1) CC77CG242(4) CCR77CG242(4)(1) 2,700.0 C192G272(4)5G5C(1) CC77CG272(4) CCR77CG272(4)(1) 3,000.0 C192G302(4)5G5C(1) CC77CG302(4) CCR77CG302(4)(1) 3,300.0 C192G332(4)5G5C(1) CC77CG332(4) CCR77CG332(4)(1) 3,600.0 C192G362(4)5G5C(1) CC77CG362(4) CCR77CG362(4)(1) 3,900.0 C192G392(4)5G5C(1) CC77CG392(4) CCR77CG392(4)(1) 4,300.0 C192G432(4)5G5C(1) CC77CG432(4) CCR77CG432(4)(1) 4,700.0 C192G472(4)5G5C(1) CC77CG472(4) CCR77CG472(4)(1) 5,100.0 C192G512(5)5G5C(1) CC77CG512(5) CCR77CG512(5)(1) 5,600.0 C192G562(5)5G5C(1) CC77CG562(5) CCR77CG562(5)(1)
820.0 C202G821(5)2G5C(1) CC78CG821(5) CCR78CG821(5)(1)
1,000.0 C202G102(5)2G5C(1) CC78CG102(5) CCR78CG102(5)(1) 1,200.0 C202G122(5)2G5C(1) CC78CG122(5) CCR78CG122(5)(1) 1,500.0 C202G152(5)2G5C(1) CC78CG152(5) CCR78CG152(5)(1) 1,800.0 C202G182(5)2G5C(1) CC78CG182(5) CCR78CG182(5)(1) 2,200.0 C202G222(5)2G5C(1) CC78CG222(5) CCR78CG222(5)(1) 2,700.0 C202G272(5)2G5C(1) CC78CG272(5) CCR78CG272(5)(1) 3,300.0 C202G332(5)2G5C(1) CC78CG332(5) CCR78CG332(5)(1)
100 VOLT – C192 (CC(R)77 PER MIL-PRF-20/29)
50 VOLT – C192 (CC(R)77 PER MIL-PRF-20/29)
200 VOLT – C202 (CC(R)78 PER MIL-PRF-20/30)
CAP. pF KEMET PART NUMBER MILITARY STYLE CC MILITARY STYLE CCR 3,900.0 C202G392(5)1G5C(1) CC78CG392(5) CCR78CG392(5)(1) 4,700.0 C202G472(5)1G5C(1) CC78CG472(5) CCR78CG472(5)(1) 5,600.0 C202G562(5)1G5C(1) CC78CG562(5) CCR78CG562(5)(1) 6,800.0 C202G682(5)1G5C(1) CC78CG682(5) CCR78CG682(5)(1) 8,200.0 C202G822(5)1G5C(1) CC78CG822(5) CCR78CG822(5)(1) 10,000.0 C202G103(5)1G5C(1) CC78CG103(5) CCR78CG103(5)(1) 12,000.0 C202G123(5)1G5C(1) CC78CG123(5) CCR78CG123(5)(1) 15,000.0 C202G153(5)5G5C(1) CC78CG153(5) CCR78CG153(5)(1) 18,000.0 C202G183(5)5G5C(1) CC78CG183(5) CCR78CG183(5)(1) 22,000.0 C202G223(5)5G5C(1) CC78CG223(5) CCR78CG223(5)(1) 27,000.0 C202G273(5)5G5C(1) CC78CG273(5) CCR78CG273(5)(1) 3,900.0 C222G392(5)2G5C(1) CC79CG392(5) CCR79CG392(5)(1) 4,700.0 C222G472(5)2G5C(1) CC79CG472(5) CCR79CG472(5)(1) 5,600.0 C222G562(5)2G5C(1) CC79CG562(5) CCR79CG562(5)(1) 6,800.0 C222G682(5)2G5C(1) CC79CG682(5) CCR79CG682(5)(1) 8,200.0 C222G822(5)2G5C(1) CC79CG822(5) CCR79CG822(5)(1) 10,000.0 C222G103(5)2G5C(1) CC79CG103(5) CCR79CG103(5)(1) 15,000.0 C222G153(5)1G5C(1) CC79CG153(5) CCR79CG153(5)(1) 18,000.0 C222G183(5)1G5C(1) CC79CG183(5) CCR79CG183(5)(1) 22,000.0 C222G223(5)1G5C(1) CC79CG223(5) CCR79CG223(5)(1) 27,000.0 C222G273(5)1G5C(1) CC79CG273(5) CCR79CG273(5)(1) 33,000.0 C222G333(5)1G5C(1) CC79CG333(5) CCR79CG333(5)(1) 39,000.0 C222G393(5)1G5C(1) CC79CG393(5) CCR79CG393(5)(1) 47,000.0 C222G473(5)5G5C(1) CC79CG473(5) CCR79CG473(5)(1) 56,000.0 C222G563(5)5G5C(1) CC79CG563(5) CCR79CG563(5)(1) 68,000.0 C222G683(5)5G5C(1) CC79CG683(5) CCR79CG683(5)(1) 82,000.0 C222G823(5)5G5C(1) CC79CG823(5) CCR79CG823(5)(1)
100 VOLT – C222 (CC(R)79 PER MIL-PRF-20/31)
50 VOLT – C222 (CC(R)79 PER MIL-PRF-20/31)
100 VOLT – C202 (CC(R)78 PER MIL-PRF-20/30)
200 VOLT – C222 (CC(R)79 PER MIL-PRF-20/31)
50 VOLT – C202 (CC(R)78 PER MIL-PRF-20/30)
© KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-630038 CERAMIC MOLDED/RADIAL — MIL-PRF-20 ULTRA-STABLE TEMPERATURE CHARACTERISTIC — CG (EIA-C0G) RATINGS & PART NUMBER REFERENCE To complete Part Number, insert the following letters: (1) Available Failure Rates: A (CC styles only); M, P , R & S (CCR styles only). (2) Available Capacitance Tolerances: B, C. (3) Available Capacitance Tolerances: B, C, D. (4) Available Capacitance Tolerances: F , G, J. (5) Available Capacitance Tolerances: F, G, J, K. (6) Insert “2” for standard design, Style C052G Stand-offs are available Insert “6” for stand-off design, Style C056G only as CCR’s, not available as CC. (7) Add “V” for stand-off design, Style C056G And leave blank for the flat bottom design (C052G) CAP. pF KEMET PART NUMBER MILITARY STYLE CC MILITARY STYLE CCR
1.0 C05(6)G109(2)2G5C(1) CC05CX1R0(2) CCR05CX1R0(2)(1)(7)
1.1 C05(6)G119(2)2G5C(1) CC05CX1R1(2) CCR05CX1R1(2)(1)(7)
1.2 C05(6)G129(2)2G5C(1) CC05CX1R2(2) CCR05CX1R2(2)(1)(7)
1.3 C05(6)G139(2)2G5C(1) CC05CX1R3(2) CCR05CX1R3(2)(1)(7)
1.5 C05(6)G159(2)2G5C(1) CC05CX1R5(2) CCR05CX1R5(2)(1)(7)
1.6 C05(6)G169(2)2G5C(1) CC05CX1R6(2) CCR05CX1R6(2)(1)(7)
1.8 C05(6)G189(2)2G5C(1) CC05CX1R8(2) CCR05CX1R8(2)(1)(7)
2.0 C05(6)G209(2)2G5C(1) CC05CX2R0(2) CCR05CX2R0(2)(1)(7)
2.2 C05(6)G229(2)2G5C(1) CC05CK2R2(2) CCR05CK2R2(2)(1)(7)
2.4 C05(6)G249(2)2G5C(1) CC05CK2R4(2) CCR05CK2R4(2)(1)(7)
2.7 C05(6)G279(3)2G5C(1) CC05CK2R7(3) CCR05CK2R7(3)(1)(7)
3.0 C05(6)G309(3)2G5C(1) CC05CK3R0(3) CCR05CK3R0(3)(1)(7)
3.3 C05(6)G339(3)2G5C(1) CC05CK3R3(3) CCR05CK3R3(3)(1)(7)
3.6 C05(6)G369(3)2G5C(1) CC05CK3R6(3) CCR05CK3R6(3)(1)(7)
3.9 C05(6)G399(3)2G5C(1) CC05CK3R9(3) CCR05CK3R9(3)(1)(7)
4.3 C05(6)G439(3)2G5C(1) CC05CJ4R3(3) CCR05CJ4R3(3)(1)(7)
4.7 C05(6)G479(3)2G5C(1) CC05CJ4R7(3) CCR05CJ4R7(3)(1)(7)
5.1 C05(6)G519(3)2G5C(1) CC05CJ5R1(3) CCR05CJ5R1(3)(1)(7)
5.6 C05(6)G569(3)2G5C(1) CC05CJ5R6(3) CCR05CJ5R6(3)(1)(7)
6.2 C05(6)G629(3)2G5C(1) CC05CJ6R2(3) CCR05CJ6R2(3)(1)(7)
6.8 C05(6)G689(3)2G5C(1) CC05CJ6R8(3) CCR05CJ6R8(3)(1)(7)
7.5 C05(6)G759(3)2G5C(1) CC05CJ7R5(3) CCR05CJ7R5(3)(1)(7)
8.2 C05(6)G829(3)2G5C(1) CC05CH8R2(3) CCR05CH8R2(3)(1)(7)
9.1 C05(6)G919(3)2G5C(1) CC05CH9R1(3) CCR05CH9R1(3)(1)(7)
200 VOLT – C052/056 SIZE (CC(R)05 PER MIL-PRF-20/35)
CAP. pF KEMET PART NUMBER MILITARY STYLE CC MILITARY STYLE CCR
110.0 C05(6)G11 1(4)2G5C(1) CC05CG11 1(4) CCR05CG11 1(4)(1)(7)
100 VOLT – C052/056 SIZE (CC(R)05 PER MIL-PRF-20/35)
50 VOLT – C052/056 SIZE (CC(R)05 PER MIL-PRF-20/35)
© KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 39 RATINGS & PART NUMBER REFERENCE To complete Part Number, insert the following letters: (1) Available Failure Rates: A (CC styles only); M, P , R & S (CCR styles only). (2) Available Capacitance Tolerances: B, C. (3) Available Capacitance Tolerances: B, C, D. (4) Available Capacitance Tolerances: F , G, J. (5) Available Capacitance Tolerances: F , G, J, K. (6) Insert “2” for standard design, Style C062G Stand-offs are available Insert “6” for stand-off design, Style C066G only as CCR’s, not available as CC. (7) Add “V” for stand-off design, Style C066G And leave blank for the flat bottom design (C062G) (8) Available Capacitance Tolerances: G, J, K MIL-PRF-20 CERAMIC MOLDED/RADIAL — MIL-PRF-20 ULTRA-STABLE TEMPERATURE CHARACTERISTIC — CG (EIA-C0G) CAP. pF KEMET PART NUMBER MILITARY STYLE CC MILITARY STYLE CCR
50 VOLT – C062/066 SIZE (CC(R)06 PER MIL-PRF-20/36)
200 VOLT – C062/066 SIZE (CC(R)06 PER MIL-PRF-20/36)
100 VOLT – C062/066 SIZE (CC(R)06 PER MIL-PRF-20/36)
CAP. pF KEMET PART NUMBER MILITARY STYLE CC MILITARY STYLE CCR 2,200.0 C512G222(5)2G5C(1) CC07CG222(5) CCR07CG222(5)(1) 2,700.0 C512G272(5)2G5C(1) CC07CG272(5) CCR07CG272(5)(1) 3,300.0 C512G332(5)2G5C(1) CC07CG332(5) CCR07CG332(5)(1) 3,900.0 C512G392(5)2G5C(1) CC07CG392(5) CCR07CG392(5)(1) 4,700.0 C512G472(5)2G5C(1) CC07CG472(5) CCR07CG472(5)(1) 5,600.0 C512G562(5)1G5C(1) CC07CG562(5) CCR07CG562(5)(1) 6,800.0 C512G682(5)1G5C(1) CC07CG682(5) CCR07CG682(5)(1) 8,200.0 C512G822(5)1G5C(1) CC07CG822(5) CCR07CG822(5)(1) 10,000.0 C512G103(5)1G5C(1) CC07CG103(5) CCR07CG103(5)(1) 12,000.0 C512G123(5)1G5C(1) CC07CG123(5) CCR07CG123(5)(1) 15,000.0 C512G153(5)5G5C(1) CC07CG153(5) CCR07CG153(5)(1) 18,000.0 C512G183(5)5G5C(1) CC07CG183(5) CCR07CG183(5)(1) 22,000.0 C512G223(5)5G5C(1) CC07CG223(5) CCR07CG223(5)(1) 27,000.0 C512G273(5)5G5C(1) CC07CG273(5) CCR07CG273(5)(1) 33,000.0 C512G333(5)5G5C(1) CC07CG333(5) CCR07CG333(5)(1) 39,000.0 C512G393(5)5G5C(1) CC07CG393(5) CCR07CG393(5)(1) 47,000.0 C512G473(5)5G5C(1) CC07CG473(5) CCR07CG473(5)(1) 56,000.0 C512G563(5)5G5C(1) CC07CG563(5) CCR07CG563(5)(1) 68,000.0 C512G683(5)5G5C(1) CC07CG683(5) CCR07CG683(5)(1) 83,000.0 C512G833(5)5G5C(1) CC07CG833(5) CCR07CG833(5)(1) 100,000.0 C512G104(5)5G5C(1) CC07CG104(5) CCR07CG104(5)(1) 3,900.0 C522G392(8)2G5C(1) CC08CG392(8) CCR08CG392(8)(1) 4,700.0 C522G472(8)2G5C(1) CC08CG472(8) CCR08CG472(8)(1) 15,000.0 C522G153(8)1G5C(1) CC08CG153(8) CCR08CG153(8)(1) 18,000.0 C522G183(8)1G5C(1) CC08CG183(8) CCR08CG183(8)(1) 56,000.0 C522G563(8)5G5C(1) CC08CG563(8) CCR08CG563(8)(1) 68,000.0 C522G683(8)5G5C(1) CC08CG683(8) CCR08CG683(8)(1)
200 VOLT – C522 SIZE (CC(R)08 PER MIL-PRF-20/38)
100 VOLT – C522 SIZE (CC(R)08 PER MIL-PRF-20/38)
50 VOLT – C522 SIZE (CC(R)08 PER MIL-PRF-20/38)
50 VOLT – C512 SIZE (CC(R)07 PER MIL-PRF-20/37)
200 VOLT – C512 SIZE (CC(R)07 PER MIL-PRF-20/37)
100 VOLT – C512 SIZE (CC(R)07 PER MIL-PRF-20/37)
© KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-630046 CERAMIC LEADED PACKAGING INFORMATION Ceramic Axial Lead Tape and Reel Packaging KEMET offers standard reeling of Molded and Conformally Coated Axial Leaded Ceramic Capacitors for automatic insertion or lead forming machines per EIA specification RS-296. KEMET’s internal specification four-digit suffix, 7200, is placed at the end of the part number to designate tape and reel packaging, ie: C410C104Z5U5CA7200. Paper (50 lb.) test minimum is inserted between the layers of capacitors wound on reels for component pitch ≤ 0.400”. Capacitor lead length may extend only a maximum of .0625” (1.59mm) beyond the tapes’ edges. Capacitors are centered in a row between the two tapes and will deviate only ± 0.031 (0.79mm) from the row center. A minimum of 36” (91.5 cm) leader tape is provided at each end of the reel capacitors. Universal splicing clips are used to connect the tape. Standard reel quantities are shown on page 48.
© KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 47 Tape and Reel Packaging CERAMIC LEADED PACKAGING INFORMATION
© KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-630048 CERAMIC LEADED PACKAGING INFORMATION KEMET Series Military Style Military Specification Standard (1) Bulk Quantity Ammo Pack Quantity Maximum Maximum Reel Quantity Reel Size C114C-K-G CK12, CC75 MIL-C- 11015/ 200/Box 5000 12" C124C-K-G CK13, CC76 MIL-PRF-20 200/Box 5000 12" C192C-K-G CK14, CC77 100/Box 3000 12" C202C-K CK15 25/Box 500 12" C222C-K CK16 10/ Tray 300 12" C052C-K-G CK05, CC05 100/Bag 2000 2000 12" C062C-K-G CK06, CC06 100/Bag 1500 1500 12" C114G CCR75 MIL-PRF-20 200/Box 5000 12" C124G CCR76 200/Box 5000 12" C192G CCR77 100/Box 3000 12" C202G CC78-CCR78 25/Box 500 12" C222G CC79-CCR79 10/ Tray 300 12" C052/56G CCR05 100/Bag 1700 12" C062/66G CCR06 100/Bag 1500 12" C512G CC07-CCR07 Footnote (2) N/A N/A C522G CC08-CCR08 Footnote (2) N/A N/A C114T CKR 11 MIL-PRF-39014 200/Box 5000 12" C124T CKR12 200/Box 5000 12" C192T CKR14 100/Box 3000 12" C202T CKR15 25/Box 500 12" C222T CKR16 10/ Tray 300 12" C052/56T CKR05 100/Bag 1700 12" C062/66T CKR06 100/Bag 1500 12" C31X 500/Bag 2500 2500 12" C32X 500/Bag 2500 2500 12" C33X 250/Bag 1500 1500 12" C340 100/Bag 1000 1000 12" C350 50/Bag N/A 500 12" C410 300/Box 4000 5000 12" C412 200/Box 4000 5000 12" C420 300/Box 4000 5000 12" C430 200/Box 2000 2500 12" C440 200/Box 2000 2500 12" C512 N/A N/A Footnote (2) N/A N/A C522 N/A N/A Footnote (2) N/A N/A C617 250/Bag 1000 12" C622/C623 100/Bag 500 12" C627/C628 100/Bag 500 12" C630/C631 100/Bag 500 12" C637/C638 50/Bag 500 12" C640/C641 50/Bag 500 12" C642/C643 50/Bag 500 12" C647/C648 50/Bag 500 12" C657/C658 50/Bag 500 12" C667/C668 50/Bag 500 12" CERAMIC PACKAGING NOTE: (1) Standard packaging refers to number of pieces per bag, tray or vial. (2) Quantity varies. For further details, please consult the factor y.