BZA900A PHILIPS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

Product specification 2001 Sep 03 DISCRETE SEMICONDUCTORS BZA900A-series Quadruple ESD transient voltage suppressor M3D743

2001 Sep 03 2

Philips Semiconductors Product specification Quadruple ESD transient voltage suppressor BZA900A-series

FEATURES

  • ESD rating >8 kV, according to IEC61000-4-2
  • SOT665 surface mount package
  • Common anode configuration.

APPLICATIONS

  • Computers and peripherals
  • Audio and video equipment
  • Communication systems

DESCRIPTION

Monolithic transient voltage suppressor diode in a five lead SOT665 package for 4-bit wide ESD transient suppression. MARKING PINNING TYPE NUMBER MARKING CODE BZA956A Z1 BZA962A Z2 BZA968A Z3 PIN DESCRIPTION 1 cathode 1 2 common anode 3 cathode 2 4 cathode 3 5 cathode 4 handbook, halfpage MGW315 123 Fig.1 Simplified outline (SOT665) and symbol. LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). Notes 1. DC working current limited by Ptot(max). 2. Device mounted on standard printed-circuit board. SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT Per diode IZ working current T amb =2 5°C − note 1 mA IF continuous forward current T amb =2 5°C − 200 mA IFSM non-repetitive peak forward current tp = 1 ms; square pulse − 4A Ptot total power dissipation T amb =2 5°C; note 2; see Fig.5 − 335 mW PZSM non repetitive peak reverse power dissipation: square pulse; tp = 1 ms; see Fig.3 BZA956A − 16 W BZA962A − 15 W BZA968A − 14 W Tstg storage temperature −65 +150 °C Tj junction temperature − 150 °C

2001 Sep 03 3

Philips Semiconductors Product specification Quadruple ESD transient voltage suppressor BZA900A-series THERMAL CHARACTERISTICS Note 1. Solder point of common anode (pin 2).

ELECTRICAL CHARACTERISTICS

Tj=2 5°C unless otherwise specified. Table 1 Per type; BZ956A to BZA968A Tj=2 5°C unless otherwise specified. SYMBOL PARAMETER CONDITIONS VALUE UNIT R th j-a thermal resistance from junction to ambient all diodes loaded 370 K/W R th j-s thermal resistance from junction to solder point; note 1 one diode loaded 135 K/W all diodes loaded 125 K/W SYMBOL PARAMETER CONDITIONS MAX. UNIT VF forward voltage I F = 200 mA 1.3 V IR reverse current BZA956A V R = 3 V 1000 nA BZA962A V R = 4 V 500 nA BZA968A V R = 4.3 V 100 nA TYPE WORKING VOLTAGE VZ (V) at IZ =1m A DIFFERENTIAL RESISTANCE rdif(Ω ) at IZ =1m A TEMP. COEFF. SZ (mV/K) at IZ =1m A DIODE CAP. C d (pF) at f = 1 MHz; VR =0 NON-REPETITIVE PEAK REVERSE CURRENT IZSM (A) at tp = 1 ms; Tamb =2 5°C

2001 Sep 03 4

Philips Semiconductors Product specification Quadruple ESD transient voltage suppressor BZA900A-series GRAPHICAL DATA handbook, halfpage10 MGW318 10−2 10−1 11 0 tp (ms) IZSM (A) BZA956A BZA968A 10−1 BZA962A Fig.2 Maximum non-repetitive peak reverse current as a function of pulse time. handbook, halfpage102 MGW319 10−2 10−1 11 0 tp (ms) PZSM (W) BZA956A BZA968A BZA962A Fig.3 Maximum non-repetitive peak reverse power dissipation as a function of pulse duration (square pulse). PZSM =V ZSM × IZSM . VZSM is the non-repetitive peak reverse voltage at IZSM . handbook, halfpage 02 68 120 MGW320 VR (V) C d (pF) BZA956A BZA968A BZA962A Fig.4 Diode capacitance as a function of reverse voltage; typical values. Tj=2 5°C; f = 1 MHz. handbook, halfpage 0 50 100 150 400 300 100 200 MGT586 Tamb (°C) Ptot (mW) Fig.5 Power derating curve.

2001 Sep 03 5

Philips Semiconductors Product specification Quadruple ESD transient voltage suppressor BZA900A-series handbook, full pagewidth MGW321 450 Ω 50 Ω Note 1: attenuator is only used for open socket high voltage measurements IEC 61000-4-2 network C Z = 150 pF; RZ = 330 Ω 1/4 BZA900A RG 223/U 50 Ω coaxR Z C Z ESD TESTER DIGITIZING OSCILLOSCOPE10× ATTENUATOR note 1 GND GND GND unclamped +1 kV ESD voltage waveform (IEC 61000-4-2 network) clamped +1 kV ESD voltage waveform (IEC 61000-4-2 network) vertical scale = 100 V/div horizontal scale = 50 ns/div unclamped −1 kV ESD voltage waveform (IEC 61000-4-2 network) clamped −1 kV ESD voltage waveform (IEC 61000-4-2 network) vertical scale = 100 V/div horizontal scale = 50 ns/div vertical scale = 5 V/div horizontal scale = 50 ns/div vertical scale = 5 V/div horizontal scale = 50 ns/div BZA956A BZA962A BZA968A Fig.6 ESD clamping test set-up and waveforms.

2001 Sep 03 6

Philips Semiconductors Product specification Quadruple ESD transient voltage suppressor BZA900A-series

APPLICATION INFORMATION

Typical common anode application A quadruple transient suppressor in a SOT665 package makes it possible to protect four separate lines using only one package. A simplified example is shown in Fig.7. handbook, full pagewidth GND keyboard, terminal, printer, etc. I/O BZA900A A B C D FUNCTIONAL DECODER MGW316 Fig.7 Computer interface protection. Device placement and printed-circuit board layout Circuit board layout is of extreme importance in the suppression of transients. The clamping voltage of the BZA900A is determined by the peak transient current and the rate of rise of that current (di/dt). Since parasitic inductances can further add to the clamping voltage (V = L di/dt) the series conductor lengths on the printed-circuit board should be kept to a minimum. This includes the lead length of the suppression element. In addition to minimizing conductor length the following printed-circuit board layout guidelines are recommended: 1. Place the suppression element close to the input terminals or connectors 2. Keep parallel signal paths to a minimum 3. Avoid running protection conductors in parallel with unprotected conductors 4. Minimize all printed-circuit board loop areas including power and ground loops 5. Minimize the length of the transient return path to ground 6. Avoid using shared transient return paths to a common ground point.

2001 Sep 03 7

Philips Semiconductors Product specification Quadruple ESD transient voltage suppressor BZA900A-series PACKAGE OUTLINE UNIT b p cD E e1 H E Lp w REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE 01-01-04 01-08-27 IEC JEDEC EIAJ mm 0.27 0.17 0.18 0.08 1.7 1.5 1.3 1.1 0.5 e 1.0 1.7 1.5 0.1 y 0.1 DIMENSIONS (mm are the original dimensions) 0.3 0.1 SOT665 bp D e A Lp detail X H E E w M A A S 0 1 2 mm scale A 0.6 0.5 c X 123 Plastic surface mounted package; 5 leads SOT665 YS

2001 Sep 03 8

Philips Semiconductors Product specification Quadruple ESD transient voltage suppressor BZA900A-series DATA SHEET STATUS Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was DATA SHEET STATUS (1) PRODUCT STATUS (2) DEFINITIONS Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Changes will be communicated according to the Customer Product/Process Change Notification (CPCN) procedure SNW-SQ-650A. DEFINITIONS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.

2001 Sep 03 9

Philips Semiconductors Product specification Quadruple ESD transient voltage suppressor BZA900A-series NOTES

2001 Sep 03 10

Philips Semiconductors Product specification Quadruple ESD transient voltage suppressor BZA900A-series NOTES

2001 Sep 03 11

Philips Semiconductors Product specification Quadruple ESD transient voltage suppressor BZA900A-series NOTES

© Koninklijke Philips Electronics N.V. 2001 SCA73 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 Printed in The Netherlands 613514/1000/01/pp12 Date of release:2001 Sep 03 Document order number: 9397 750 08542