BYVB32-50 GE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
FAST EFFICIENT PLASTIC RECTIFIER Reverse Voltage -50 to 150 Volts Forward Current -18.0 Amperes
FEATURES
♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Dual rectifier construction, positive centertap ♦ Glass passivated chip junctions ♦ Low power loss ♦ Low forward voltage, high current capability ♦ High surge capability ♦ Superfast recovery time for high efficiency ♦ High temperature soldering in accordance with CECC 802 / Reflow guaranteed MECHANICAL DATA Case: JEDEC TO-263AB molded plastic body Terminals:Plated leads solderable per MIL-STD-750, Method 2026 Polarity:As marked Mounting Position:Any Weight:0.08 ounce, 2.24 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS BYVB32-50 BYVB32-100 BYVB32-150 BYVB32-200 UNITS Maximum repetitive peak reverse voltage V RRM 50 100 150 200 Volts Maximum RMS voltage V RMS 35 70 105 140 Volts Maximum DC blocking voltage V DC 50 100 150 200 Volts Maximum average forward rectified current at TC =120°C I(AV) 18.0 Amps Peak forward surge current 10ms single half sine-wave superimposed at at T J=150°C IFSM 150.0 Amps Maximum instantaneous forward voltage per leg at: IF=20A, V F 1.15 Volts IF=5.0A, TJ=100°C 0.85 Maximum DC reverse current T J=25°C 10.0 at rated DC blocking voltage T J=100°C IR 600.0 µA Maximum reverse recovery time per leg (NOTE 1) trr 35.0 ns Typical junction capacitance (NOTE 2) C J 45.0 pF Maximum thermal resistance per leg (NOTE 3) R Θ JC 3.0 °C/W Operating and storage temperature range T J, TSTG -65 to +150 °C NOTES: (1) Reverse recovery test conditions: IF=1A VR =30V, di/dt=100A/µs, Irr=10% IRM (2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to case per leg mounted on heatsink NOTICE: Advanced product information is subject to change without notice -T-SEATING PLATE 0.380 (9.65) 0.420 (10.67) 0.320 (8.13) 0.625 (15.88) 0.027 (0.686) 0.037 (0.940) 1 2 0.160 (4.06) 0.190 (4.83) 0.045 (1.14) 0.055 (1.40) 0.018 (0.46) 0.025 (0.64) 0.080 (2.03) 0.110 (2.79) 0.090 (2.29) 0.110 (2.79) 0.245 (6.22) MIN - HEATSINK PIN 1 K K 0.095 (2.41) 0.100 (2.54) K PIN 2 0.047 (1.19) 0.055 (1.40) Dimensions in inches and (millimeters) TO-263AB NEW PRODUCT NEW PRODUCT NEW PRODUCT
0.01 0.1 100 0 50 100 150 4.0 8.0 11 00 100 0 20 40 60 80 100 0.1 100 1,000 FIG.1 - FORWARD CURRENT DERATING CURVE CASE TEMPERATURE, °C AVERAGE FORWARD CURRENT, AMPERES FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG TJ = 25°C PULSE WIDTH = 300 µs 1% DUTY CYCLE TJ=25°C f=1.0 MHZ Vsig=5mVp-p FIG. 4 - TYPICAL REVERSE CHARACTERISTICS PER LEG INSTANTANEOUS FORWARD VOLTAGE, VOLTS TJ=150°C 10ms SINGLE HALF SINE WAVE (JEDEC Method) FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG PEAK FORWARD SURGE CURRENT, AMPERES REVERSE VOLTAGE, VOLTS NUMBER OF CYCLES AT 50 H Z TC =100°C INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG JUNCTION CAPACITANCE, pF TC =25°C RESISTIVE OR INDUCTIVE LOAD RATINGS AND CHARACTERISTIC CURVES BYVB32-50 THRU BYVB32-200