BY500-100 MIC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

SOFT RECOVERY FAST SWITCHING RECTIFIER VOLTAGE RANGE 100 to 800 Volts BY500-100 THRU BY500-800 CURRENT 5.0Ampere E-mail: sales@cnmic.com Web Site: www.cnmic.com

FEATURES

  • Low coat construction
  • Fast switching for high efficency.
  • Low reverse leakage
  • High forward surge current capability
  • High temperature soldering guaranteed: 260℃/10 secods/.375”(9.5mm)lead length at 5 lbs(2.3kg) tension MECHANICAL DATA
  • Case: Transfer molded plastic
  • Epoxy: UL94V-O rate flame retardant
  • Polarity: Color band denotes cathode end
  • Lead: Plated axial lead, solderable per MIL-STD-202E method 208C
  • Mounting position: Any
  • Weight: 0.042ounce, 1.19 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
  • Ratings at 25OC ambient temperature unless otherwise specified
  • Single Phase, half wave, 60Hz, resistive or inductive load
  • For capacitive load derate current by 20% SYMBOLS BY500 -100 BY500 -200 BY500 -400 BY500 -600 BY500 -800 UNITS Maximum Repetitive Peak Reverse Voltage VRRM 100 200 400 600 800 Volts Maximum RMS Voltage VRMS 70 140 260 420 560 Volts Maximum DC Blocking Voltage VDC 100 200 400 600 800 Volts Maximum Average Forward Rectified Current 0.375”(9.5mm) lead length at TA= 55℃ I(AV) 5.0 Amp Peak Forward Surge Current 8.3mS single half sine wave superimposed on rated load (JEDEC method) IFSM 200 Amps Maximum Instantaneous Forward Voltage @ 5.0A VF 1.35 Volts TA = 25℃ 25 Maximum DC Reverse Current at Rated DC Blocking Voltage TA = 100℃ IR 1.0 µA Maximum Reverse Recovery Time （NOTE2）Tj=25℃ trr 200 ns Typical Thermal Resistance (Note 1) RθJA 10 ℃/W Operating Junction Temperature Range TJ (-55 to +150) ℃ Storage Temperature Range TSTG (-55 to +150) ℃ Notes: 1.1”(30×30mm)copper heatsink. 2. Reverse Recovery Test Conditions:If=0.5mA,Ir=1.0mA,Irr=0.25A DO-27 DIA..052(1.3) .048(1.2) DIA..220(5.6) .197(5.0) .375(9.5) .335(8.5) 1.0(25.4) MIN. 1.0(25.4) MIN. Dimensions in inches and (millimeters)

SOFT RECOVERY FAST SWITCHING RECTIFIER VOLTAGE RANGE 100 to 800 Volts BY500-100 THRU BY500-800 CURRENT 5.0Ampere E-mail: sales@cnmic.com Web Site: www.cnmic.com CHARACTERISTICS FIG.4-TYPICAL REVERSE DERATING CURVE FIG.1-TYPICAL FORWARD CURRENT 150 17512575 100 4.0 2.0 Single Phase Inductive Load Half Wave 60Hz Resistive or AVERAGE FORWARD CURRENT, (A) AMBIENT TEMPERATURE, ( ° C) 0.375"(9.5mm)Lead Length RATING AND CHRACTERISTIC CURVES BY500-100 THRU BY500-800 FORWARD CHARACTERISTICS FIG.3-TYPICAL INSTANTANEOUS 55 4 6 40 FORWARD SURGE CURRENT (JEDEC Method) Tj=Tjmax 8.3ms Single Half Sine-Wave NUMBER OF CYCLES AT 60 Hz PEAK FORWARD SURGE CURRENT, (A) 0 1 100 200 300 28 102060 100 FIG.2-MAXIMUM NON-REPETITIVE PEAK

1 Cycle

FIG.6-TEST CIRCUIT DIAGRAM AND REVERSE REXOVERY TIME CHARACTERISTIC NOTE: 1.Rise Time =7ns max.Input Impedance=1megohm.22pF 2.Rise time=10ns max.Source Impedance=50 ohms SET TIME BASE FOR 50 /100NS /cm -1.0A 0.25A +0.5A OSCILLOSCOPE (NOTE 1) PULSE GENERATIOR (NOTE 2) (-) NON INDUCTIVE 10Ω NONINDUCTIVE 50Ω NONINDUCTIVE D.U.T (-) （approx）

25 Vdc

(+) 100 1.2 Tj =25° C 1.00.80.60.4 1% Duty Cycle Pulse Width=300us 1.0 0.1 0.01 (A)(A) INSTANTANEOUS FORWARD VOLTAGE,(V) INSTANTANEOUS FORWARD CURRENT, 1.41.61.8 jT =100° C 8040 60 100 1.0 0.1 200 (UA) PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) INSTANTANEOUS REVERSE CURRENT, 140120 T =25° Cj 0.01 jT =50° C Trr 1cm 5.0 6.0 1.0 EQUAL LEAD LENGTH TO HEAT SINK（V ) JUNCTION TOLEAD RθJL (°C/W) THERMAL RESISTANCE FROM, FIG.5-TYPICAL JUNVTION CAPAVITANCE 3.0