BY359DX-1500

BY359DX-1500 PHILIPS | Alldatasheet

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Philips Semiconductors Objective specification Rectifier diode BY359DX-1500 fast, high-voltage FEATURES SYMBOL QUICK REFERENCE DATA

• Low forward volt drop V R = 1500 V
• Fast switching
• Soft recovery characteristic V F ≤ 1.5 V
• High thermal cycling performance
• Isolated mounting tab I F(AV) = 10 A IFSM ≤ 60 A trr ≤ 600 ns GENERAL DESCRIPTION PINNING SOD117 Glass-passivated double diffused PIN DESCRIPTION rectifier diode featuring low forward voltage drop, fast reverse recovery 1 cathode and soft recovery characteristic. The device is intended for use in TV 2 anode receivers, series resonant switched mode power supplies and other tab isolated high voltage circuits. The BY359DX series is supplied in the conventional leaded SOD117 package. LIMITING VALUES Limiting values in accordance with the Absolute Maximum System (IEC 134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT V RSM Peak non-repetitive reverse - 1500 V voltage VRRM Peak repetitive reverse voltage - 1500 V VRWM Crest working reverse voltage - 1300 V IF(AV) Average forward current sinusoidal; a = 1.57; Ths = tbf - 10 A IF(RMS) RMS forward current - 20 A IFRM Peak repetitive forward current sinusoidal; a = 1.57 - 60 A IFSM Peak non-repetitive forward t = 10 ms - 60 A current t = 8.3 ms - 66 A half sine wave; Tj = 150 ˚C prior to surge; with reapplied VRWM(max) I2tI 2t for fusing t = 10 ms - 18 A 2s Tstg Storage temperature -40 150 ˚C Tj Operating junction temperature - 150 ˚C ISOLATION LIMITING VALUE & CHARACTERISTIC Ths = 25 ˚C unless otherwise specified SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT V isol R.M.S. isolation voltage from f = 50-60 Hz; sinusoidal - 2500 V both terminals to external waveform; heatsink R.H. ≤ 65% ; clean and dustfree C isol Capacitance from both terminals f = 1 MHz - 10 - pF to external heatsink k a case April 1998 1 Rev 1.000

Philips Semiconductors Objective specification Rectifier diode BY359DX-1500 fast, high-voltage THERMAL RESISTANCES SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT R th j-hs Thermal resistance junction to with heatsink compound - - tbf K/W heatsink without heatsink compound - - tbf K/W R th j-a Thermal resistance junction to in free air. - tbf - K/W ambient STATIC CHARACTERISTICS Tj = 25 ˚C unless otherwise stated SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT V F Forward voltage I F = 20 A - 1.3 1.8 V IF = 10 A; Tj = 150˚C - 1.00 1.5 V IR Reverse current V R = 1300 V - 10 100 µA VR = 1300 V; Tj = 100 ˚C - 50 300 µA DYNAMIC CHARACTERISTICS Tj = 25 ˚C unless otherwise stated SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT trr Reverse recovery time I F = 2 A; VR ≥ 30 V; -dIF/dt = 20 A/µs - 0.47 0.6 µs Q s Reverse recovery charge I F = 2 A; VR ≥ 30 V; -dIF/dt = 20 A/µs - 1.6 2.0 µC Vfr Peak forward recovery voltage IF = 10 A; dIF/dt = 30 A/µs - 11.0 - V April 1998 2 Rev 1.000

Philips Semiconductors Objective specification Rectifier diode BY359DX-1500 fast, high-voltage MECHANICAL DATA Dimensions in mm Net Mass: 5.9 g Fig.1. SOD117; The seating plane is electrically isolated from all terminals. Notes 1. Refer to mounting instructions for F-pack envelopes. 2. Epoxy meets UL94 V0 at 1/8". 4.5 16.0 max 0.7 10.0 5.1 max 18.1 min 2.2 max 1.1 0.4 M 10.9 25.1 3.0 25.7 5.8 max 3.3 0.9 max 3.3 22.5 max April 1998 3 Rev 1.000

Philips Semiconductors Objective specification Rectifier diode BY359DX-1500 fast, high-voltage DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability.

Application information

Where application information is given, it is advisory and does not form part of the specification.  Philips Electronics N.V. 1998 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. April 1998 4 Rev 1.000